Latest cold mix material Tenders | Government cold mix material Tenders

Corporations/Associations/Others

CTN :45532318

09 Jul, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For corrigendum : repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clau

State Government

CTN :45729473

08 Jul, 2026 2.03 Lacs

Hanumangarh - Rajasthan

Tender For supply and placing of cold mix material in road cuts under pwd division hanumangarh

State Government

CTN :45723427

06 Jul, 2026 NA

Surat - Gujarat

Tender For supply of asphalt cold mix material for the roads of different talukas of surat district

CTN :45734142

08 Jul, 2026 7.29 Lacs

Indore - Madhya Pradesh

Tender For metal patch work after laying of mooram and crushed stone for mud problem in rainy season at necessary places in ward no. 73 under zone no. 21

CTN :45701925

24 Jul, 2026 11.08 Crore

Multi City - Multi State

Tender For supply and stacking of dressed stone boulder, stone metal 40 mm, stone chips 20 mm, stone chips 12.5 mm and natural/ crushed sand for pmt wks between km 24.00 to 61.590 on nganglam-deothang road

CTN :45057902

30 Jun, 2026 8.00 Lacs

Udhamsign Nagar - Uttarakhand

Tender For bid to ras bid to ras supply of a4 size paper , white board marker , pencil sharpener 04 pcs , pencil packet of 10 black , highlighter pen , stapler pin 9.3 mm width , stapler pin 7.1 mm width , sketch pen , flip chart sheet , xerox tonner hp 137a , register 100 pages , cello tape medium , cello tape coloured- 04 colours , file cover for 21.5 cm x34.5 cm , all pin , information folder , stick note page marker , mfr participant book , cssr participant , plastic folder , xerox tonner refilling , latex rubber gloves , face shield barrier device for cpr , face mask , disposable paper cup , batteries aa size , oxygen cylinders refilling , refilling of fire extinguisher , dust mask , ear plugs , spray paint fluorescent , 2.5 inch peni nails , 4 inch peni nails , cement , 10 to 20 mm steel bar mix , 8 mm steel bar sariya , binding wire , crushed stone aggregate 20 mm , crushed stone aggregate 10 mm , coarse sand , bricks , plywood 13 mm thick 4x4 feet , metal sheet 6 mm 4x4 feet , aqueous fill foaming foam 0.5 ltr , concrete slab 4x4 feet , cgi sheet 12x4 feet , fuller earth , poly bag , poly sheet roll , bleaching powder

CTN :45690058

06 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of metal 40 mm down grade for job , crushed sand oblique dust for job , metal 40 mm down grade for maint , crushed sand oblique dust for maint , chips 20 mm down grade , chips 12point5 mm down grade , river sand , river sand oblique plaster m sand , tmt steel 8 mm dia , tmt steel 10 mm dia , tmt steel 12 mm dia

State Government

CTN :45695476

08 Jul, 2026 2.03 Lacs

Hanumangarh - Rajasthan

Tender For supply and placing of cold mix material in road cuts under pwd division hanumangarh

CTN :45671410

07 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 06 x toilet cum bathing cubicle (4/4) in ferozepur - toilet cum bathing cubicle structure with pre-fab colns, purlins, rafters, wall (gi metal skinned puf panels), ppgi roof. pvc door (08 nos) of size 750 x 2100 mm and aluminum ventilator (08 nos) of size 450 x 450 mm, including all necessary fixing arrangement and fittings accessories as per tech specification and drawing att., well burnt common building bricks of sub class b of size 23 x 11.5 x 7.5 cm conforning to is: 2212-1991, opc (43grade) confirming to is 8112 in 50 kgs hdpe bags (make -ultratech/ ambuja/acc), 20mm graded stone aggregate (crushed) conforming to is-383 1970. they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., 40mm graded stone aggregate (crushed) conforming to is-383 1970., they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., interlocking tiles of size (200 x 120 x 60 mm thick gde m-35) i section of best quality., fine sand shall be clean, free from adhesive coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970., hard core stone aggregate 50-63 mm size., non skid ceramic floor tiles of size 400 x 400 x 7 to 8 mm thick. they shall be abrasion resistant conforming to is-15622, make: johnson/ kajaria/somany, looking mirror size 600x450mm of best quality aluminium frame and brass screw and washer for fixing with wall panel. make: modi guard /saint goban, white cement. make:- jk/ birla, water proofing compound, cement based paint for external wall. make:- shalimer/ asain/ berger, welding rod, oil bound distemper (off white) make: shalimer/asain/ berger, sand paper, turpentine oil, painting brush 4"., painting brush 2"., red oxide primer. make:- berger / shalimar / asian, paint synthetic enamel black colour. make:- berger / shalimar / asian, ms flat 35 x 3 mm, cp soap dish 125 mm. make: - hindustan/ jaguar/ sona/ prayag, angle iron staging of size 1.5 x 1.5 x 2.5 m with vertical ms angle columns of size 50 x 50 x 6 mm with 3mm thick ms sheet fitted at top of the staging work as shown in drg along with connecting accessories make: jindal/tata/sail/rinl, 1.25 mm thick ms sheet manhole cover of size 600 x 600 mm, incl ms handle of size 25 x 5 mm, with angle iron 40 x 40 x 5 mm all around and cross bracings. make: jindal/tata/sail/rinl, soakage pit cover of size 2.56x1.56m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet including 600 x 600 mm suiteble opening cover with handle, septic tank cover of size 2.0 x 1.22m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet, rotational moulded high density polyethylene water storage tank (cylinderical vertical tank) of 1000 ltrs capacity as per is 12701 of 1996 along with 20 mm dia brass valve with pvc float ball. make: - sintex/ polycon/ hindustan, gi socket 15 mm, isi marked. make: jindal/tata/sail/rinl, gi elbow 15 mm, isi marked. make: jindal/tata/sail/rinl, gi tee 15 mm, isi marked. make: jindal/tata/sail/rinl, gi union 15 mm, isi marked. make: jindal/tata/sail/rinl, cp bib cock 15 mm dia long body isi marked. make: - jaguar/ onida/hindware, gl pipe 15 mm dia, isi marked, make: jindal/tata/sail/rinl, gi nipple 15 mm 3" long, isi marked, make: jindal/tata/sail/rinl, gi plug 15 mm, isi marked, make: jindal/tata/sail/rinl, 15 mm dia pvc connection pipes, isi marked, gi socket reducer 20-15 mm, isi marked, make: -jindal/tata/sail/rinl, gi pipe 20 mm dia med grade, isi marked, make: -jindal/tata/sail/rinl, gi socket 20mm, isi marked, make: - tata/ jindal/ ravindra, gi elbow 20 mm, isi marked, make: jindal/tata/sail/rinl, gi tee 20 mm, is