Latest collet scrap Tenders | Government collet scrap Tenders

Central Government/Public Sector

CTN :45430684

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous melting consist of cut up parts of coaches including scrap ms sheet, channels, body bolster, angles , different type of rods, brackets, strips, head stock assembly, trough floor ,b.s.door, ms emergency window frame,ms seat partition, frame, ms window equalizing device, pipes,, foot step and foot plate, nut ,bolt ,split pin various condemned scrap ferrous surplus non stock,stock items released from shops, panels of coaches with or without minor wooden/c i /non-ferrous attachments, if any etc. note : cutting permission may be allowed for easy loading s.b.lot no. bpl/ crws/26-27/ /ferrous/ 12/ 0043 restricted item-1 axle box spring and bolster spring .2. screw coupling. brake beam, draw hook, buffer plunger, buffer socket, vacuum reservoir. 3. stainless steel items.4 gi pipe above 3 feet length will not be delivered 5, all type of bearing. note- (a) non ferrous (except minor attachment) if any found in the lot will not be delivered (b) regarding classification of items, depot officer verdict will be final for any dispute. note: delivery will be made on actual weighment basis.

Central Government/Public Sector

CTN :45400958

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting, ms and gi nut bolt revet, signal lever, head stock assembly,rail screw, ms angle below 1 feet,draft gear,foot step,punji,end cover, screw coupling,buffer plunger,bridle bar,coupler yoke, and all type of signal melting,signal rod piece below 3 feet, screw rod,joggle fish plate,switch fittings,switches,slide chair bearing plate,gauge tie plate, stretcher bar,gilmet,air brake cylinder complete and loose,axle cover,knuckle,dv,cp top, and bottom, shackle,empty box iron,boxes,ms round,ms pipe ms bar,ms pully, coupler rod,lashing chain,signal lever,beater, buffer socket, phawrah,coupling shaft ,iron strips,d valve,empty rru and similar box,brake beam, shocker , truss bar, striker casting,ms jali,ms small angle, shocker crow bar,axle box housing,shackle, pu pad cover,pull and push rod,side bearer housing, hand brake wheel, equailising lever,sab part, lever, erc all type jack,brake beam, isolating cock ,drain cock,bp/fp angle cock,bend plate,wiper arm safety shoe,clamp bracket,operating handle flange,sand injactor body, band plate,all type of heavy melting category similar items with or without undetachable nf attachment .note-while delivery if any other non ferrous or non similar items found in the lot will not be delivered.qty.on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

Central Government/Public Sector

CTN :45008556

04 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap fe & n/fe (1)compresor off size, 110no, fe-935kg, cu-66kg(2)nrv 6"/4", 2no, fe-6kg (3)timer, 24no, fe-0.48kg (4)capacitor 2.5 mfd to 120 mfd, 668no, pvc-13.36kg (5)current transformer,9no, fe-36kg, cu-9kg (6)condensor coil, 15no, fe-3.75kg, cu-3.75kg, al-1.50kg (7)expansion valve, 14no, cu-1.40kg (8)fan blade, 79no, fe-31.60kg, al-3.95kg (9)db box/dp switch, 17no, fe-1.70kg (10)mccb/icptn/off size, 59no, fe-11.80kg, cu-.295kg (11)power pack, 1no, fe-.10kg (12)5 in 1 socket 5 amp, 38no, cu-0.19kg (13)sealed dome compresor, 84no, fe-252kg, cu-33.60kg (14)fan motor of indoor unit, 49no, fe-12.25kg, al-4.90kg (15)condensor fan motor, 139no, fe-69.50kg, cu-27.80kg (16)geyser element, 9no, cu-0.45kg (17)over load relay, 67no, fe-0.67kg, cu-0.335kg (18)volt meter, 16no, fe-0.08kg, cu- .032kg, al- .08kg (19)water cooled condensor, 3no, fe-9kg, cu- .30kg, al- .30kg (20)front grill, 3no, pvc- .60kg (21)fitting off size, 1941no, fe-970.50kg (22)wall fan off size, 123no, fe-270.60kg, cu-18.45kg (23)glow sign board, 30no, fe-90kg (24)tik w board off size, 63no, wood-15.75kg (25)acb off size, 9no, fe-193.50kg, cu-9kg (26)ms angle/gi structure, 1no, fe-468kg (27)v bracket, 20no, fe-80kg (28)insulator scrap broken, 1363no, nil (29)energy meter, 1724no, fe-43.10kg, cu-17.24kg (30)scrap wood ,1no, wood- 587kg (31)pvc alumn. wire, 80.7 m, al-40.350kg, (32)pedestal fan ,99no, fe-99kg, cu-9.90kg, al-4.95kg (33) geyser off size, 56no, fe-448kg, cu-5.6kg, al-11.2kg (34)stabilizer, 10no, fe-120kg, cu-25kg (35) insect killer, 21no, fe-73.50kg, cu-1.05kg (36)cls panel 63 amp.,17no, fe-595kg, cu-49.81kg (37) main switch /mcb/mccb, 688no, fe-66.80kg , cu-13.36kg (38)heater (plastic),1no, fe-0.20kg (39) exhaust fan off size, 294no, fe-588kg, cu-44.10kg, al-14.7kg (40)lv/hv side bushing, 5no, cu-0.50kg (41)tap changer switch ,4no, fe-0.40kg, cu-0.1kg (42) power capaciter ,2no, fe-1kg (43)street light controller ,5no, fe-10kg (44) led lamp scrap,629no, al-3.145kg (45)released horizontal siren ,2no, fe-74kg, cu-6kg (46) air circulator fan ,41no, fe-205kg, cu-6kg (47) scrap tyer , 18no (48) led tube released , 2187no, al-2.187kg (49) ups, 2nos, fe-6kg, cu-0.2kg, al-0.02kg (50) ocb ,2no, fe-150kg, cu-15kg, al-2.5kg (51) thermostate ,48no, fe-4.80kg (52) capacitor off size , 193no, cu-0.965kg (53) blower drum ,40no, fe-8kg (54) pvc cut size copper wire, 470m., cu-0.5kg (55) pvc insulated copper wire , 145kg, cu-95kg (56) combination piler ,3no, fe-0.75kg (57) clamp meter ,1no, cu-0.005kg (58) fan regulator , 6no, cu- .012kg (59) cappilery (copper tube) ,6no, cu-0.06kg , (60) empty drum ,27no, fe-486kg (61) 1 core alumn. cable, 840m, al-40kg (62)lighting arrester,1no, fe-1kg (63) vaccume interueptor, 3no, fe-0.30kg (64)outdoor type isolater ,1no, fe-40kg (65) compressor off size ,69no, fe-172.5kg, cu--17.25kg (66) pcb kit , 10no (67)single phase preventor ,63no, fe-3.15kg, cu-1.26kg (68) (a)outdoor fitting off size,1670 no, fe-501kg, al-1002kg, (b)fitting outdoor,280 no, fe-700kg, cu-14kg, al-42kg (69)switch socket ,21no, cu-0.105kg (70)controller switch, 1no, fe-0.05kg (71) electronic chok, 23no, fe-1.15kg, al-0.115kg (1-71) lot no-5 (1-71)location-sse/ph/store/ddu

Central Government/Public Sector

CTN :44836100

13 Apr, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap pieces & cut pcs. of m.s. pipes,g.i. pipes, s.s. pipes, of sort & sizes, and clamp, valve, socket with or w/o fs & nfs attachments if any, us & ur. loc- lying at bin no.a-14 in scrap yard judw. remarks:-[1] removal of rubber, hose pipe allowed before delivery. [2].loading by purchaser [3].loose nfs item will be taken back if found in lot.

Central Government/Public Sector

CTN :44719984

09 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting, ms and gi nut bolt revet, signal lever, head stock assembly,rail screw, ms angle below 1 feet,draft gear,foot step,punji,end cover, screw coupling,buffer plunger,bridle bar,coupler yoke, and all type of signal melting,signal rod piece below 3 feet, screw rod,joggle fish plate,switch fittings,switches,slide chair bearing plate,gauge tie plate, stretcher bar,gilmet,air brake cylinder complete and loose,axle cover,knuckle,dv,cp top, and bottom, shackle,empty box iron,boxes,ms round,ms pipe ms bar,ms pully, coupler rod,lashing chain,signal lever,beater, buffer socket, phawrah,coupling shaft ,iron strips,d valve,empty rru and similar box,brake beam, shocker , truss bar, striker casting,ms jali,ms small angle, shocker crow bar,axle box housing,shackle, pu pad cover,pull and push rod,side bearer housing, hand brake wheel, equailising lever,sab part, lever, erc all type jack,brake beam, isolating cock ,drain cock,bp/fp angle cock,bend plate,wiper arm safety shoe,clamp bracket,operating handle flange,sand injactor body, band plate,all type of heavy melting category similar items with or without undetachable nf attachment .note-while delivery if any other non ferrous or non similar items found in the lot will not be delivered.qty.on approx basis.

Central Government/Public Sector

CTN :44668248

01 Apr, 2026 NA

Thiruvananthapuram - Kerala

Tender For disposal of miscellaneous scrap materials (metallic) metal scrap mild steel(ms) , metal scrap galvanized iron(gi) , metal scrap aluminium , metal scrap powder coated gi , metal scrap copper , metal scrap copper tube/ coil , metal scrap stainless steel (ss) , metal scrap cast iron (ci) , used pipes mild steel (ms) , used pipes stainless steel (ss) , used pipes galvanized iron (gi) , used valves & fittings cast iron (ci) , used valves & fittings mild steel (ms) , used valves & fittings stainless steel (ss) , used valves & fittings brass , used valves & fittings bronze/phospherous bronze , used valves & fittings plastics , used flanges mild steel(ms) , used flanges stainless steel (ss) , used flanges galvanized iron (gi) , used flanges cast iron (ci) , used metal fittings mild steel(ms) , used metal fittings stainless steel(ss) , used metal fittings galvanized iron(gi) , used metal fittings cast iron (ci) , used duct galvanized iron(gi) , used duct aluminium , used panels stainless steel(ss) , used panels powder coated gi , used panels aluminium , used belt rubber , used belt polyurethane (pu) , used bearings , used pump , used sheet galvanized iron(gi) , used sheet aluminium (al) / al powder coated , used sheet miled steel(ms) , used sheet stainless steel(ss) , used trolley wheel stainless steel(ss) , used trolley wheel miledstee(ms) , used trolley wheel galvanized iron(gi) , used trolley wheel polyurethane (pu) , used pneaumatic cylinder , used pneaumatic fittings , used hoses polyurethane (pu) , usedhoses braided , used hoses nylon/cotton (fire hose) , used heat exchanger copper (cu) , used heat exchanger aluminium (al) , used heat exchanger miledstee(ms) , used ac compressor (hermatically sealed) , ss needle scrap , copper wire scraps(99.99% pure)winding operation rejection , used hepa /microwave / pre filter , electrical scrap (industrial socket, plug, switch gears, controllers, , timer, contactors mcb, mccb, elcb, rccb, indicator lamp , switch , board, control switches , meters, capacitor, relay , light fixtures, , starters, solenoid valves, cooling fan, exhaust fan leaf, rosette box) , used tube / light led , instrumentation scrap , used motors motor above 0.5 hp , used motors motor below 0.5 hp , old cctv cameras/ dvr , used cable (copper) , used cable (aluminium) , electrical motor housing (scrap) , old fire extinguisher- 2 kgs , old fire extinguisher- 4 kgs , old fire extinguisher- 6 kgs , modular puf panel , used aluminium door , modular puf panel (ss sheet cladding) , used acp sheet

Collet Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector