Latest comb gauge Tenders | Government comb gauge Tenders

CTN :45528123

22 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of combat gauge 10 x 10 cm quikclot , chitosan hemostatic dressing 8 x 8 cm , chest seal hyfin , waterjel burn dressing 10 x 10 , survival blanket large

Central Government/Public Sector

CTN :45479287

22 Jun, 2026 NA

Solapur - Maharashtra

Tender For manufacturing and supply of a complete set of inspection gauges as per rdso drg no t-9003(part) (alt-3) with the latest alt., for 10125 mm curved switch with 60e1a1 thick web tongue rails for 1 in 12 turnout b.g. (1673 mm) for 60e1 rail on psc sleepers to drawing no. rdso/t-6155. one set consists of one set consists of 1) end template at actual toe (for right side tongue rail)gauge no. 1/a, 2) end template at actual toe (for leftt side tongue rail) gauge no. 1/b, 3) head width checking gauge at 2678 mm fromats (22 mm head thickness) - gauge no. 2 (gauge 2a & 2b), 4) head width checking combined gauge at 2678 mm from ats (22 mm head thickness) - gauge no. 2/1, 5) head width checking combined gauge at 4958 mm from ats (55 mm head thickness) - gauge no. 3 (gauge 3a & 3b), 6) head width checking combined gauge at 4958 mm from ats (55 mm head thickness) - gauge no. 3/1 (duly packed in well cushioned double decker system for easy handling) [ warranty period: 30 months after the date of delivery ] ]

CTN :45421988

18 Jun, 2026 NA

Kharagpur - West Bengal

Tender For manufacturing and supply of complete set of inspection gauges for 10125mm o.r. thick web curved switches b.g. for 1 in 12 60 kg drg. no. rdso/t-6155 (uic)on psc sleeper for use in depot . one set consist of : (1) end template at actual toe of switch, - gauge no. 1 (2) head width checking gauge at 2678mm from ats , - gauge no.2,(22mm head thickness) gauge-2a & 2b(3) head width checking combined gauge at 2678mm - gauge no. 2/1,from ats (22 mm head thickness),(4) head width checking combined gauge at 4958mm - gauge no. 3,from ats (55 mm head thickness) gauge- 3a & 3b (5) head width checking combined gauge at 4958mm - gauge no. 3/1,from ats (55 mm head thickness) make : alliance or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45260264

05 Jun, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of combat gauge 10 x 10 cm quikclot , chitosan hemostatic dressing 8 x 8 cm , israeli bandage 4 inch , chest seal hyfin , needle for pneumothorax , cat torniquet gen 7 , cervical collar , waterjel burn dressing 10 x 10 , leg traction splint , survival blanket large , light weight portable emergency stretcher , gsw dressing mk 300 7.6 cm 300 cm

Central Government/Public Sector

CTN :45372345

19 Jun, 2026 NA

Bikaner - Rajasthan

Tender For manufacturing and supply of complete set of inspection gauges as per drawing no. rdso/t-9003(part) alt-03 for 10125mm o.r. thick web curved switches b.g. for 60 kg (uic) on psc sleeper to drawing no. rdso/t-6155 for use in depot. one set consist of the following:1) end template at actual toe of switch (gauge no. 1)2) head width checking gauge at 2678mm from ats, 22mm head thickness (gauge no. 2a & 2b)3) head width checking combined gauge at 2678mm from ats, 22mm head thickness (gauge no. 2/1)4) head width checking combined gauge at 4958mm from ats, 55mm head thickness (gauge no. 3a & 3b)5) head width checking combined gauge at 4958mm from ats, 55mm head thickness (gauge no. 3/1) [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45329575

11 Jun, 2026 NA

Surat - Gujarat

Tender For supply of different types of spares for filed instruments on rate contract basis for 03 (three) years at head water works. - transmitter (display unit) for open channel flow/loh-rof/level meter, transmitter (display unit) for level meter, range: 30 mtr, transducer for loh/rof/level/open channel flow transmitter, range: 8 mtr, transducer for level/open channel flow transmitter, range: 10 mtr, transducer for level transmitter, range: 30 mtr, level meter(integrated)/loh-rof, range: 6 mtr, level meter(integrated), range: 12 mtr, pressure transmitter (peizo resistive), sensor for insertion type ultrasonic flow meter, transmitter insertion type ultrasonic flow meter, sensor cable for insertion type ultrasonic flow meter, pcba for fus060 siemens flow meter, flow indicating totalizer, receiving indicators, limit switch, auto drain valve, pressure transmitter (flush diaphragm), sealed lead acid battery for ups, cap: 12 v 42 ah, selec make dtc204 temp controller, constant voltage transformer, pressure gauge 0 - 4 kg/cm2, pressure gauge 0 - 7 kg/cm2, offline ups 0.6 kva, online ups 1 kva with 1 hour back up including batteries & battery rack, online ups 3 kva with 1 hour back up including batteries & battery rack

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

State Government

CTN :45190381

08 Jun, 2026 14.90 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : procurement of spares for sadc damper actuator, installed at 210 mw atps, mppgcl, chachai - for sadc actuators type : a0404112214 , sadc actuator assembly(model-a0404112214) consists of:- accessories- 04’’x04’’ cylinder, pneumatic double acting class-1 positioner fitted with 04 pressure gauge of 40mm dial, double acting alr, air filter regulator, ss tubing, fork with pin. , class-1 pneumatic double acting positioner with accessories:- manifold assembly, 04 connectors, 40mm dial pressure gauges, crank lever assembly and feedback lever etc. , pneumatic double acting positioner with in built non contact type hall sensor operated pft only , seal kit for class 1 positioner(seal, gasket and o-rings) , sleeve & spool assembly complete with 12mm o-ring for class – 1 positioner , leather bellow with clamp & nut bolt for sadc power cylinder , diaphragm assembly with seal, gasket & o-ring set for class -1 positioner , double acting air lock relay port size 1/8 inch npt (f) , main spring holder assembly for class -1 positioner , crank lever assembly mounted on cover-a base plate of class-1 positioner , double acting aluminium manifold assembly with sleeve & spool & “o ring” , feedback lever complete assembly with nuts and spring washer , o-rings & seal kit for sadc power cylinder , crank assembly sealed zz type bearing , anodised, zinc plate fork for sadc cylinder , fork pin for coupling cylinder with damper

Central Government And Public Sector

CTN :44687719

28 May, 2026 NA

Angul - Odisha

Tender For corrigendum : tender for supply of procurement of pressure and temperature gauges for c and i department d d - pressure gauge , pressure gauge , pressure gauge , baud pr gauge , pressure gauge dia , pr gauge 150mm , pressure gauge , pressure gauge , pressure gauge , pr gauge 4 dial , scm , pressure gauge , pressure gauge for rcw , pr gauge , scm , scm , pressure gauge , pressure gauge , diaphragm seal p , pressure gauge , prerssure gauge , press gauge 100mm , kg scm 150mm , pr gauge 0 400mmwc , pr gauge dial , scm diaphragm type , pressure guage , pressure gauge 0 40 ksc , diff pressure , kg scm , pr gauge , pr gauge , dia sealed , dia sealed , dia sealed , dia sealed , pr gauge , vacuum pr , c temp , capillary ty t , pr g g gly , pressure gauge , pressure gauge , pressure gauge , pressure gauge , pressure gauge , pressure , pr gauge , pressure gauge , pr gauge , pressure gauge , pressure gauge , temp gauge

CTN :44380139

28 Mar, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of zil-131 vehicle - turn indicator pilot lamp type pd20-d, forward axle engagement pilot lamp type pp6-b, bulb 3 cp/ rear light lamp 3 cd, bearing sleeve pull back spring, elbow bolt washer, air tank adaptor alluminium washer, oil pressure drop warning lamp( type pd 20e), spot light change over switch type p20-a2, hose clip 35a ts 17670, wheel drum screw, fuel level gauge sending unit change over switch type p19a2 assy, clutch housing att bolt, lamp (head lamp & spot light)(x5-6240-0003955), cover gasket, inner gland/wheel hub inner oil seal assy, cab doom light type pk 201 assy, cabin top light/hood lamp type pd 308, apron, water pump v belt a-54 (1420mm), alternator v belt a-47(1230mm), five terminal wire connector panel type ps5 assy, rear window glass sealing strip lock, sealing strip lock, spot light type pg16--l and knob assy, rubber hose, rear window glass sealing strip, rubber hose (thermostat to radiator inlet), rectangular 3 chamber light rh, assy suction line (fuel tank rh to three way cock, assy suction line (fuel tank lh to three way cock, fuel level gauge sending unit type bm-117 a assy, speedometer flexible shaft type gv128-n assy, assy return pipe ( from fuel leak off to three way cock, wiper arm, switch assy (turn indicator switch type p 105-a), weather strip/door shut sealing strip, door sealing strip, air horn type s40-v assy (for lot 2)(or os no-665,667), end boot, wind shield sealing strip, isolator switch, floor mat/ floor nut, wiper motor, clutch plate assy modified, pressure plate finger type 310mm, instrument pannel type kpz04 assy (for lot 2), fuel tank assy(131-1101010-b), radiator assy (for lot 2), pump/steering booster pump assy, synchroniser 4th & 5th speed gear assy, filament lamp 12v 3.6w mcc clear, copper washer 27mm, washer, control valve sealing ring, sealing ring, adjusting washer, oil seal outer cap(cup), cover gasket, under hood lamp (for lot 1), gland assy (41.7x62x10mm), intrument panel illumination lamp holder type pp126-k assy with wire, bolt, gasket (for lot 1), cover gasket, housing cover gasket, front fender lower mud flap assy/lower shield, ignition switch, flasher unit 12v, steering gear case lower cover sealing ring, horn type s44 assy, front brake chamber flexible hose assy, unit sealed beam assy/light unit (fg-105-3711200v)(or os no-807), oil seal assy (also caters for fig 35), vent window shut sealing strip assy, release bearing for finger type pressure plate, drive shaft rear bearing (306516-p)(150212), main shaft front roller bearing, steering wheel assy, input shaft (for lot 1), benjo bolt copper washer, pedal pull back spring, spring washer, indicator glass, coller screw m14x1.5x65mm/ bolt m14x1.5x65mm, ln screw 35x10mm (301543141022) t-815 in lieu, expending bushing, nut, spot light push button switch type vk -38b, sealing ring, nut, gland (for lot 1 fig 35), gland/strg gear warm oil seal assy, sealing ring, vent hatch cover nut, forward axle switch type vk-403 (no off 1for lot 2) (also caters for fig-59), assy suction line ( from fuel pump to three way cock, assy return pipe ( from three way cock to lh fuel tank, axle shaft gasket, wind shield sealing strip, bearing ball jnl single row 25x52mmx15mm, brake chamber diaphragm without hole, head light type fg122-gg (130t-3711010-b), blinker lamp, shoe friction lining, brg tapper roller/wheel hub outer bearing(30215), clutch release bearing sleeve, thermal insulation assy/front heat insulaion assy, additional fuel tank assy (131-1102010b), frame no 1 (cross member), transmission main shaft (for lot 2) (130-1701105-b2), fwd driving axle shaft with constant velosity universal joint and steering knucke assy left hand, clutch housing assy, gasket (for lot 1)(or os no-930), spring washer, flange attachment stud, rubber below (water line to thermostat), flange gasket, nut, nut, att bolt m12x1.5x45mm for fly wheel mtg, inspection lamp, propeller shaft attachment wedge, detent

Comb Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

Central Government And Public Sector