Latest combat gear Tenders | Government combat gear Tenders

Central Government/Public Sector

CTN :45422759

18 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of fork eye (sub assly) for draw & buff gear to schaku coupler drg no.- 40.586.06.05(2). asper rdso specn. no.- 61-b-36/rev.68-1 (rev.-2 of february-2025). [ warranty period: 36 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45393117

13 Jun, 2026 NA

Gondia - Maharashtra

Tender For supply of draw & buff gear to escorts drg.no. sk-752 as per drg.no. rdso drg.no. 40.588(0)s,escorts drg.no.sk-752 specn: rdso specn.no. 61-b-36/rev-68-1 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45374539

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous draft gear, draw and buff gear assembly, draw and buff gear assembly, yoke assembly of coupler with/without nylon/other rubber attachment full/broken is as is where is condition. custodian: cdms-rsf-gsd-per, pl no:98050450. note: loading by crane/jcb is also permitted. location: 14th path way rhs

Central Government And Public Sector

CTN :45280929

01 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of allen key 8 mm , allen key 10 mm , allen key 22 mm , slugging wrench , slugging spanner , reversible ratchet handle half inch , reversible ratchet handle three fourth inch , torque wrench , outside micrometer , soft face hammer 40 mm with steel handle , center punch , straight air drill machine , air grinder , measuring tape , tungsten rotary cutter 6x5mm , tungsten rotary cutter 6x13mm , tungsten rotary cutter 6x10mm , flat file , half round file single cut grades of cut second , half round file single cut grades of cut bastard , half round file double cut grades of cut second , half round file double cut grades of cut bastard , needle file , cutting wheel , grinding wheel or dc wheel , gas cutting torch , welding rod ms 7018 36 h , welding rod ss 308 , welding rod ss 309 , emery paper grade 120 , emery tape fine grade , cleaner , developer , penetrant , rustolene rust disintegrator , wire brush , tefflon tape , tig electrode , air hose pipe wire embadded , masking tape 50 mm , ss wire 1.6mm , ss wire 2.4mm , masking tape 75 mm , half inch impact hexagon bit socket 6 mm drive , half inch impact hexagon bit socket 8 mm drive , half inch impact hexagon bit socket 14 mm drive , half inch impact hexagon bit socket 17 mm drive , size 19mm three fourth inch drive socket 12 point , jack up bolt m10 x 150mm , jack up bolt m12 x 150mm , jack up bolt m16 x 150mm , buff flap wheel , 11mm deep socket 6 point , combination plier , circlip plier set , hydraulic hand pump , hydraulic jack button type , hydraulic jack with hand pump , air micro grinder 120 degree angle grinders 3 collet , air micro grinder 90 degree angle grinders 3 collet , curbide rotary burrs 5x10 mm , curbide rotary burrs 3x15 mm , oil stone size 150mmx50mmx25mm fine grade , klinger gasket 1.5mm, non metallic , tinsnips , cylindrical grinding stone 10x20 mm , taper grinding stone 10x20 mm , taper grinding stone 21x50 mm , cylindrical grinding stone 20x50 mm , chain hoist , triple boiled linseed oil sealing compound , premium polyester rope , dowsil rtv sealant 736 , pneumatic connector with coupling allen key 8 mm,size: lenghth of the long arm=100 mm, lenghth of the short arm=36 mm, moc: chrome vanedium steel, black finsh, allen key 10 mm,size: lenghth of the long arm=112 mm, lenghth of the short arm=40 mm, moc: chrome vanedium steel, black finsh, allen key 22 mm,size: lenghth of the long arm=200 mm, lenghth of the short arm=80 mm, moc: chrome vanedium steel, black finsh, slugging wrench, size: 1 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, slugging spanner, size: 3/4 inch,moc: chrome vanedium steel, heavy duty black industrial finish- rust resistant, reversible ratchet handle 1/2'',head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, reversible ratchet handle 3/4'', head dia: 64 mm, head depth: 29 mm, gear action: 32 mm, oal: 605 mm, torque wrench, 1/2 inch square drive, 7-35 kg, widtht: 50 mm, height: 29 mm, length: 805 mm (approx. ), weght: 3.9 kg (approx. )., torque wrench, size :1/2 inch square drive, 25- 135 nm, torque wrench, size :1/2 inch square drive, 50-220 nm, torque wrench, size :3/4 inch square drive, 135-675 nm, outside micrometer, range (200-225)mm, graduation: 0.01mm, material of the frame: stainless steel, material of the spindle and anvil: hardened stainless steel, soft face hammer 40 mm with steel handle, center punch, length: //bid details 2 / 59

Central Government/Public Sector

CTN :45154558

25 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of front plate (sub assly.) for draw and buff gear to schaku coupler drg no.- 40.586.06.02 (4). as per rdso specn. no.- 61-b-36/rev.68-1 (rev.-2 of february-2025) [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :45110707

15 May, 2026 NA

Avadi - Tamil Nadu

Tender For auction sale of depot ferrous scrap - condemned and u/s items released from coaches and bogies (centre pivot pin, draw and buff gear, gear wheel, shock absorber, intermediate tube, brake beams, coupler yoke, brake riggings parts, pins, washer, bolt & nut, rear cover, front cover, helical spring(cut/defaced). dashpot, axle box housing and other emu components melting in nature) on "as is where is" condition. any non-ferrous(like bronze, brass, aluminum etc.) items found it should be handed over to the custodian.. location:back side of emu workshop, avadi.. pl number:98050126. ds8:022688-26-00660 dated 2026-04-22. custodian:sse/emu/avd. remarks:crane/jcb/forklift loading permitted

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government/Public Sector

CTN :44959325

27 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of yoke (sub-assly) for draw and buff gear to schaku coupler drg no.- 40.586.06.04 (2). as per rdso specn. no.- 61-b-36/rev.68-1 (rev.-2 of february-2025). [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :45049367

09 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of rear plate (sub assly) for draw & buff gear to schaku coupler drg.no.- 40.586.06.03 (4) or equivalent rdso approveddrawing and as per rdso specn. no.- 61-b- 36/rev.- 68-1, with amnd. slip no.- i of october-2016 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44980760

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of gauges for schaku coupler with calibration certificate (traceable to nabl certified lab)& traceability certificate as per list below- 1.profile gauge for upper & lower cup sleeve(2ed-181-1149(schaku 40.586.06.01 (4)& 2ed-18101153(schaku(40.624.06-4(3),drg no.-se-g-121 -02 nos. 2. gauge for pin (31.8c11), drg. no.-se-g-120 -02 nos. 3. gauge for allen bolt/screw (2ed-181-1166), drg.no.-se-g-128-02 nos. 4. gauge for fork head 2ed-181-1204(schakudrgno.40-1000.10-6(3), drg. no. - se-g-132-02 no?s 5. gauge for front plate sub assy.2ed-181-1156 (schaku drg.40...586.06.02 (4), drg.no.-se-g-122-02 nos. 6. profile gauge for adjustable cup sleeve/pair of cup sleeve 2ed-181-1074(schaku drg.40.317.13-1 (3), drg. no.se-g-129 -02 nos. 7. gauge for bush upper & lower 2ed-181-1091(schaku drg.40-524.07-3(4) &2ed -181 1089(schaku drg.40-524.-7-4(4), drg.no.-se-g-118 -02 nos. 8. limit gauge for yoke (sub.assy.)2ed-1811183(schaku gr.40.586.06.04 (2), drg. no.-se-g-124 -02nos. 9. snap gauge for bolt 2ed-181-1181(schaku drg.40.586.06.3 (4), drg.no.se- g-126-02nos. 10. snap gauge for bearing bolt 2ed-181-1093(schaku drg.40.586.07.03 (3), drg. no.se-g-119-02 n o s. 11. limit gauge for carrier (sub assy.)& leaf spring compl.sub assy.2ed-181-1200 (schaku drg.40-524.07.03(4) & 2ed-181-1106(schaku drg.40.524.07.08 (20), drg.no.se-g-117-02 no?s 12. limit gauge for rear plate sub assembly 2ed-181-1157(schaku drg.40.586 .06.03 (4) drg.no.se-g-123-02 nos. 13. gauge for articulation bearing 2ed-181-1151(schaku drg.40.sk.1960 (3) drg. no.s-g-127 -02 nos. 14. go gauge for draft gear/draw &buff gear (sub assy.)drg.no.se-g-136-02 no?s qty-02 sets (set of 14 gauges). note: 1) gauge will be made of hard alloy steel. 2) tip or face of gauging profile should be hardened & tempered. 3) supplier should provide manufacturers certificate. 4) material to be supplied in well packed carrying case. [ warranty period: 30 months after the date of delivery ]

Combat Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors