Latest combination pliers Tenders | Government combination pliers Tenders

CTN :40359242

10 Jun, 2025 5.01 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of fire fighting items at ssctps, site store, suratgarh fire bucket 9 liters capacity bucket as per is standard design as per is: 2545 made out of heavy duty g.i. , two way dividing breaching made of light alloy as per is: 5131. , hand controlled branch multi purposes branch (nozzle) the nozzle should be adjustable gallonage with multiple flow settings & 63 mm bim inlet hand nozzle. the nozzle should have selectable flow setting of 115-230-360-475-550 lpm @ 7 bar with flush mode without shut off the nozzle made of pyrolite material, with pistol grip made of zytel and with celcon ball valve. the nozzle shall have feature for straight stream & spray pattern. the length of branch should not , exceed more than 10,5" and weight should not exceed more than 2,5kg, the branch should be simple to operate pattern control (1/4 tum from straight stream to fog). it should have minimum fog angle of 110 and raised lug marks straight stream for limited visibility operations. it should be capable of flushing without shutting down or changing stream patterns. the branch should be nfpa 1964 compliant, fm approved & ce certified, the warranty for branch should minimum five years. be , suction adaptors 100 mm female to 63 mm , instantaneous male, , high range zero torque nozzle specifically designed with ergonomics, handling, control, and reduced firefighter fatigue in mind. in addition, the pistol grip and injet swivel are positioned to eliminate the reaction force torque found in a conventional pistol grip designs. nozzle shall be combination of solid stream and fog nozzle with the capability to flow either stream independently or simultaneously. the solid bore shall have field changeable tips with orifices of either 3/8", ", 5/8", %", 7/8", 15/16", 1", or 11/8" and the fog shall flow. the nozzle shall have spinning teeth, multiple pattern detents, flush without shutting down, twist shutoff of the fog stream, and a full time swivel inlet 2 ", the weight of nozzle not more than 4 kg. the baje shutoff of the smooth bore shall be with dual drive trunnions, the nozzle shall also be constructed of lightweight pyrolite, have a shutoff ball with flow diversion for the fog waterway, have a 05 year warranty and meet nfpa , jet- fog type nozzle, conforming to bs: 336, 63 mm male instantaneous inlet connection, aluminum alloy material with natural finish, operating kg/cm2 pressure-10 , inline foam generator, inlet connection63 mm male instantaneous as per bs 336/is: 903 outlet connection- 63 mm female instantaneous as per bs 336/is: 903, foam induction-3 10 6%, maximum working pressure-10 kg/cm2 , seat washer material neoprene rubber is:937, for hydrant valve , fireman axe as per is: 926, made of forged steel, hardened, and having insulated for fire service use. , fire beater as per is: 8096, made of carbon (mild) steel mesh, and having bamboo handle, suitable for fire-fighting class-a , suction strainer for 100 mm suction hose as per is: 907, , fire hook as per is: 927 with bamboo. , armoured suction hose pipe 100 mm x 4.5 mtr length with gm 100mm male and female round threaded suction hose coupling conforming as per is: 902 , jet-spray shut off type fog nozzle 120 conforming to is:952 63 mm male instantaneous connection, inlet gunmetal material with natural polished, operating pressure-10 kg/cm2 , aluminium foam making branch pipe-fb 5x with g,m 63mm male instantaneous inlet with flow discharge capacity 225 lpm@7kg/cm2 with pvc pickup tube and ss strainer , revolving type branch pipe conforming to is:906 63 mm male instantaneous inlet connection, material gunmetal with natural polished, operating pressure-10 kg/cm2, flow-245 lpm 7kg/cm2 , alloy foam making branch pipe of fb-10x-suitable to discharge 450 lpm@ 7 kg/cm2 (made of aluminium alloy construction) with pvc pick-up tube along with stainless steel dip tube suitable for self-induction , ss 63 mm triple purpose nozzle as per is:2871 , ceramic wool fire blanket white,

corporations/Associations/Others

CTN :40521389

12 Jun, 2025 5.21 Lacs

Nashik - Maharashtra

Tender For supply of modular fan regulator 5step eme 2m , uv tubelight fitting , combination pliers , transformer , temperature sensor pt 100 , capacitor , mccb 250a , ind proximity sensor pnp 8mm , solenoid coil with socket , smps , relay 24vdc , variable resistance pot 1k , 1 phase hormonic line filter , office files , led tubelight 230vac 8watt , panel cooling fan 6 inch , three pin top 6a , multifunction led laltern 5watt , inductive sensor ifm ifs 206 , centrifugal switch , sr ball bearing 6206zz , electrical insulating varnish , 3 phase forward reverse switch , carbon brush , inductive sensor pnp 3 wire , solid state relay 10 amp , air break contactor 42vac dc , tubular heater 11.2x3683mm long 16ohms , ssd drive 1 tb sata type , rap main motor tacho bid number/ & ( * ) : gem/2025/b/6263620 dated/ + : 29-05-2025 bid document/ 2 2 1 / 31

corporations/Associations/Others

CTN :40522320

13 Jun, 2025 NA

Washim - Maharashtra

Tender For supply of alluminium extenssion ladder , selectable flow nozzle 63mm size , pyro protect rrl delivery hose type b 63mm coupling 15m , breathing air compressor , fire man axe , bolt cutter extra large , corw bar , pick axe wooden handles , rope terelean nylon 30m each , drag hook heavy duty , circular saw metal cutter machine electrical base , chain saw wooden cutter machine petrol base , diamond chain saw concrete cutter machine petrol base , uniform set for fire fighter as per your latter , officer uniform set as per your latter , rain coat best quality , 100 feet long 16mm dia bob rope , fire extinguishers abc 4kg , fire extinguishers co2 4.5 kg , spread with wooden handle , first aid box for 6 person , hydraulic combi tools , hydraulic power pack , hydraulic hand pump , hydraulic jack , blower and exauster , life bouy jacket , life bouy ring with 30m rope , kernmantle rescue rope 30m size 50mm circumference , electric gloves 10000 volt pairs , ba set with spare 04 cylinder with fire engulfment test , afff 6 percent concentration 20 kg jerrycan , mattock with handle , refilling of co2 type fire extinguishers 4.5 kg , refilling of abc type fire extinguisher 4kg , refilling of abc type fire extinguisher 6kg , refilling of breathing apparatus cylinder , refilling of aksa cylinder 300 bar bid number/ & ( * ) : gem/2025/b/6276915 dated/ + : 29-05-2025 bid document/ 2 2 1 / 30

Central Government / Public Sector

CTN :40511689

17 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of set of tools consisting seven items (1) t-spanner with box head size 8 mm, length: 100 mm as per is specification is: 6131(1980), qty-01 no. (2) insulated screw driver flat head size 3 mm, 200 mm le ngth as per is specification is: 844-1 (1989),qty-01 no, (3)combination pliers size 160 mm x 60 mm as per is specification is:2615 (1989),qty-01 no, (4) multipurpose spanner 2 inch jaw,length:450 mm as per specifi cation is: 6149 (1984),qty-01 no, (5) ball peen hammer 600 grams as per is specification is:841 (1983), qt y-01 no, (6) flat chisel 30mm width, 8 inches length as per is specification is:402 (1990),qty-01 no. (7) hex agonal pin punch 3/16 inches x 6 inches as per is specification is: 6860 (1973), qty-1 no. make: taparia or venus or jhalani or its equivalent [ warranty period: 30 months after the date of delivery ]

CTN :40477845

05 Jun, 2025 4.91 Lacs

Dharmapuri - Tamil Nadu

Tender For supply of non sparking tools - 8x9 mm nst open spanner , 10x11 mm nst open spanner , 12x13 mm nst open spanner , 14x15 mm nst open spanner , 16x17 mm nst open spanner , 18x19 mm nst open spanner , 20x22 mm nst open spanner , 21x23 mm nst open spanner , 24x27 mm nst open spanner , 25x28 mm nst open spanner , 30x32 mm nst open spanner , double open end spanner 24x26 , double open end spanner 6 mm to 32 mm set , 8x9 mm nst ring spanner , 10x11 mm nst ring spanner , 12x13 mm nst ring spanner , 14x15 mm nst ring spanner , 16x17 mm nst ring spanner , 18x19 mm nst ring spanner , 20x22 mm nst ring spanner , 21x23 mm nst ring spanner , 24x27 mm nst ring spanner , 25x28 mm nst ring spanner , 30x32 mm nst ring spanner , bihexagon ring spanner 24x26 , bihexagon ring spanner 6 mm to 32mm set , ring slogging wrench 30 mm , ring slogging wrench 32 mm , ring slogging wrench 36 mm , adjustable wrench 6 inch x 150mm , adjustable wrench 24x200 mm , adjustable wrench 36x300 mm , pipe wrench 50x350 mm , pipe wrench 60x450 mm , pipe wrench 18 inchx450 mm , pipe wrench 14 inchx350 mm , star valve wrench - 19 mm x 800 mm 2h , star valve wrench - 50 mm x 800 mm 10h , sledge hammer 500 gms , sledge hammer 1 kg , sledge hammer,bronal,5000 gram , non sparking flat chisel 16mmx200 , non sparking flat chisel 25mmx300 , allen key set in inches , allen key set,bronal, 1.5 to 10 mm , bronal combination pliers - 200 mm , cutting plier - 150mm , cutting plier,bronal,210 mm , bronal hacksaw frame - 500 mm , hacksaw blade - 12 x 300 mm , slotted screw driver,bronal,100x4mm , slotted screw driver,bronal,100x5mm , slotted screw driver,bronal,100x6mm , slotted screw driver,bronal,150x6mm , slotted screw driver,bronal,150x8mm , slotted screw driver,bronal,200x8mm , slotted screw driver,bronal,250x9mm , slotted screw driver,bronal,300x10mm , slotted screw driver,bronal,350x11mm , slotted screw driver,bronal,400x12mm , bronal long nose pliers - 200 mm , bronal groove joint pliers - 300 m

Central Government/Public Sector

CTN :40484663

03 Jun, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of a set of tools required for toolbox installed in electric locos consisting of following i tems:-1. t-spanner with box head size 8mm length 100mm(for opening of hb,sb, battery box etc)- 1no, 2. insulated screw driver flat head size 3mm, 270mm-1no, 3. combination pliers: size 160mm x 60mm or simi lar-1no, 4. multi-purpose spanner:2 inches jaw length 250mm or similar-1no, 5. chisel-1no, 6. pin punch-1n o. note:- all tools must be placed in a padded pouch. make/brand:- taparia or stanley or jhalani expert or dinisha only. [ warranty period: 30 months after the date of delivery ]

CTN :40473312

04 Jun, 2025 NA

Howrah - West Bengal

Tender For supply of a set of tools required for toolbox installed in electric locos consisting of following it ems: (1) t-spanner with box head size: 8 mm, length: 100 mm (for opening of hb, sb, battery box etc.) - 1 no. (2) insulated screw driver flat head size 3 mm, 270 mm - 1 no (3) combination pliers: size 160 mm x 60 mm or similar - 1 no. (4) multi-purpose spanner: 2 inches jaw length 250 mm or similar - 1 no. (5) chisel - 1 no. (6) pin punch - 1 no. note: all tools must be placed in a padded pouch. [ warranty period: 30 months after the date of delivery ]

CTN :39038241

06 Jun, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

CTN :40100378

20 May, 2025 NA

Paschim Medinipur - West Bengal

Tender For corrigendum : supply and repairing of miscellaneous/electrical articles/items for the f.y. 2025- 2026 - ac condenser (hitachi), ac copper pipe, ac machine compressor, ac machine copper pipe, adapter 12 volt 900 ma pk, adapter 12 volt 600 ma pk, adopter - 9 volt 900 ma - pk, adopter - 9 volt 600 ma - pk, adopter 6 volt 600 ma pk, adopter 6 volt 900 ma pk, ahuja p.a wireless amplifier, air filter for generator (mico), aluminum ghoranchi/ ladder folding, alwin excel (pesticide), alwin gold (pesticide), amplifier (250 wt ) box (wooden), amplifier (250 wt ) ahuja, amplifier (ahuja) 120 wt. (ssb 120), amplifier 500 volt (ahuja), amplifier repairing, angle hang the camera, angle iron 1.5 "x 1.5 " with cutting for barbed fencing, angular stop cock - cp ( supreme), app role, primary fitting and fixing, aqua sure water filter (ro) (kent), aquaguard (ro) repair, asbestos (10 x 3.5) konarak, asbestos (7 x 3.5) konarak, ash tray (bone china), axe, ball valve 1" (supreme), ball valve 1.25" (supreme), ball valve 2" (supreme), ball valve 3" (supreme), ball valve 3/4 (supreme), ball valve 4" iron (ss), bamboo - good quality, bamboo ladder 25 ft -, bamboo ladder 12 ft -, barbed wire 12 swg 3 ply -, barbed wire 12 swg 2 ply -, basin bracket, basin hunt, basin tap steel (essco), bathtub poly - standard (supreme), bati steel (bowl), battam (wooden) 1.5" x 1.5, battam (wooden) 2" x1.5", battery (alkaline) 9 volt - hi watt, battery (12 volt / dry cell / amco - 7.3 amp) l.r.s. light, battery 12 vt ( 100 amp ) exide, battery 12 vt ( 80 amp ) exide, battery 12 vt (150 amp ) exide, battery charger 12 v - 8 amp - puja, battery for cordless calling bell (eveready), battery for cordless calling bell (nippo), battery for loud hailers (eveready), bed sheet (single) bombay dyeing, bed sheet (double) bombay dyeing, belcha - standard (tata), bib cock .5 " (supreme), bicycle (hero jet) all complete for gents, bicycle (hero) all complete for lady, bi-cycle overhauling & repairing with parts, binocular (nikon), binocular (olympus), bio fertilizer (50kg), bird feed, blanket (oswal) - single, blanket (prisoner), blanket cover - cotton (oswal), blanket double (bombay dyeing), bleaching powder 25 kg, blue ( robin ), board 6 port (supreme), board pvc 8 x 10 (supreme), board pvc 4 x 4 (supreme), board pvc 4 x 6 (supreme), board pvc 5 in 1 (supreme), board pvc 7 x 5 (supreme), board pvc 8 x 6 (supreme), body worn camera (transcend ), bone dust 50 kg, bonti iron 16, bottle socket 25amp (supreme), bowl bone china (standard size) (lao-pola), bracket - double - havels, bracket - single - havels, brass bar 4 pole 100 amp flora, brass bar 4 pole 63 amp flora, brass bar 4 pole, 200 amp. - flora, brass chain, brass holder, brasso tub, bricks loading & unloading with carrying cost upto the venue, broom stick 4.0, brown paper (42x28), bucket fire big (16) - tata, bucket fire small (12) - tata, bucket g.i. (12" ) tata, bucket plastic (10") - cello, bucket plastic (12") cello, bulb ( led) 14 wt (philips), bulb ( led) 18 wt (philips), bulb ( led) 25 wt (philips), bulb ( led) 3 wt (philips), bulb ( led) 36 wt (philips), bulb ( led) 5 wt (philips), bulb ( led) 9 wt (philips), bulb 100wt. (philips), bulb 200wt. (philips), bulb 60wt. (philips), c.f.l tube (35 wt/- philips), c.f.l tube light complete set (35 wt/- philips), c.f.l. tube (11 wt/ - philips), c.f.l. tube (14 wt/ - philips), c.f.l. tube (18 wt/ - philips), c.f.l. tube (23 wt/ - philips), c.f.l. tube (3 wt/ - philips), c.f.l. tube (5 wt/ - philips), c.f.l. tube (8 wt/ - philips), c.f.l. tube light complete set (11 wt/ - philips), c.p. bib cock 1/2 (essco), c/o changer 100 amp (flora), c/o changer 200 amp ( flora), cable wire 4 core 25 mm (100 mtr.) (hevels), cable wire 6 mm 2 core aluminum ( nirmal ), calculator (casio), calling bell - cordless (anchor)), calling bell - cordless (kona), calling bell manual, camera (digital) (nikon ), can with lid ( allu ) 0.5 lts. crown, candle (big), candle (small), candle for water fil

Central Government/Public Sector

CTN :38033341

17 May, 2025 4.62 Lacs

Paradip - Odisha

Tender For bid to ras bid to ras procurement of hardware materials for pradip port authority marine department - v belt a-56 , v belt a-53 , v belt a-62 , v belta-48 , v belt b-43 , v belt b-53 , v belt b-35 , v belt b-67 , v beltb-75 , v belt b-79 , v beltb-102 , v belt dynamoax-48 , v belt ax-42 , v belt ax-37 , v belt ax-32 , schottel v belt spb-1550 , wd-40 (rust remover) 500 ml , flexible rubber hose pipe 2.5 inch (5 ply) , flexible rubber hose 2.25 inch (5 ply) , flexible rubber hose pipe 2 inch (5 ply) , flexible rubber hose pipe 1.5 inch(5 ply) , flexible rubber hose pipe 1.25 inch(5 ply) , m seal (1kg) , anabond red (50 gm) , lifting belt 3 ton 3 mtr. , lifting belt 5 ton 5 mtr. , loctite 574 (250gm) , loctite 242 (50 gm) , loctite 243 (50 gm) , loctite 270 (50 gm) , hss hacksaw blade 18 tpi , thread seal tape , cotton waste , cotton rags , araldite adhesive solution (90 gm) , emery cloth 40 grd. , emery cloth 60 grd. , emery cloth 120 grd. , cutting wheel 4 inch (make-bosch/makita/dewalt) , cutting wheel 14 inch (make-bosch/makita/dewalt) , grinding wheel 7 inch (make-bosch/makita/dewalt) , grinding wheel 4 inch (make-bosch/makita/dewalt) , buffing wheel 4 inch(make-bosch/makita/dewalt) , gland packing 8 mm (make champion/equivalent) , gland packing 10 mm (make champion/equivalent) , gland packing 12.5 mm (make champion/equivalent) , gland packing 16mm (make champion/equivalent) , rubber beading 35 mm x 25 mm , rubber beading 35 mm x 35mm , s.s hose clamp 75 mm , s.s hose clamp 65 mm , s.s hose clamp 50mm , g.p gasket 4 mm (make champion) , g.p gasket 3 mm (make champion) , g.p gasket 2 mm (make champion) , g.p gasket 1 mm (make champion) , g.p gasket 0.5 mm (make champion) , metallic steam gasket 3 mm , emery paper 120 grd. , emery paper 220 grd. , emery paper 320 grd. , emery paper 600 grd. , emery paper 800 grd. , rubber gasket 4 mm , painting brush (flat) 25 mm , painting brush (flat) 50mm , roller brush spare 100 mm , silicon tube (500 gram) , d-shackle-10 t (with test certificate) , d-shackle-05 t (with test certificate) , d- shackle- 03 t (with test certificate) , d- shakle- 02 t (with test certificate) , d- shackle-01 t (with test certificate) , d- shakle-1/2 t (with test certificate) , long handle file scrapper , axe- 2.5 kgs , chipping hammer with wooden handle , wire brush (5 line of wire) , plastic handle , ss edge threaded knives-9 inch , ss edge knives-18 inch , ss edge knife-12 inch , deck scrubbing brush , steel marline spike-2 inch , steel marline spike-1 inch , synthetic hair cabin broom , synthetic hair paint brush-4 inch , synthetic hair paint brush-3 inch , synthetic hair paint brush-2 inch , synthetic hair paint brush-1inch , synthetic hair dog leg brush-2 inch , woolen mini roller brush , pencil brush , godrej lock- 7 lever , ball pen hammer(medium) , plier (taparia-8 inch) , fire hose (twill woven , 100% polister with epdm rubber lining , isi marked , dg shipping approved , size-2.5 inch , length-30 mtrs , working pressure-260 psi , 18 kg/sq. (with coupling) , fire hose (twill woven , 100% polister with epdm rubber lining , isi marked , dg shipping approved , size-2.5 inch , length-30 mtrs , working pressure-260 psi , 18 kg/sq. (without coupling) , sli-rench (2-medium , 2-small) , fire bucket(medium , gi coated , isi marked) , katuri , gi bucket(medium , isi marked) , gi bucket(small , isi marked) , spade (with wooden handle isi marked) , daa (isi marked) , hacksaw (frame with blade) , pvc pipe-0.75 inch- 30 mtrs , pvc pipe- 0.5 inch -30mtrs , pvc pipe 1 inch- 30 mtrs , commode brush , plastic scoop , cotton rags ( long cotton) , reflecting tape (white , solas approved) , teepol liquid , twisted coir rope (size-28mm , 4-strands , breaking strength-7.76kn) , termite control chemical under isi specification (500 ml/pcs)

Combination Pliers Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector