Latest communications cable Tenders | Government communications cable Tenders

Central Government / Public Sector

CTN :45737363

21 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply, installation and commissioning of pre-wired modular workstation consisting of a single control office customized to equip two sads and two daws systems arranged and installed on a t-shaped modular workstation with integrated cable management systems as per specifications. specifications of modular workstation: 1) the workstation shall each be of 5 feet (l) x5 feet (w) the combined size: 10 feet (l) x 5 feet (w) - 1set, made of 25 mm nfc wood and 1 mm acrylic laminate. 2) the sads displays shall be installed such that the bottom edge of the display is at a height of 5' (approximate) from the floor. these shall be installed preferably along the longer edge of the t and facing the operators, 3) the daws system shall be installed such that it is possible to be used sitting at the workstation. 4) all interconnecting wiring for lan, power supply and telephones shall be done inside the cable management system (powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. communication accessories: i) lan rj45: 4 nos ii)telephone, rj11 : 4 nos iii) power supply, 5 amp sockets: 6 nos 5) all wires shall be brought out to interface boxes one for power supply and another for the communications cables. these boxes shall be designed to accept connections from the control room circuits. note: design, supply, fitment, installation, testing and commissioning shall have to done by the firm confirming to the pre-wired modular t- shaped workstation standards. material shall confirm to hpl/nfc engineered wood (25mm thickness) as per epd-ies-0012055:002 (s-p- 12055) certification. make: godrej interio/tumbi/greeken/moudulartek or its equivalent. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45698752

29 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap defaced engine (4w),scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap empty catalytic converter,scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,scrap sheared body scrap(h),defaced engine scrap (2w),scrap tyres with and without rim (2w),scrap leaf spring

Central Government/Public Sector

CTN :45701696

15 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned (ms low melting) consisting of ms cutting pieces, cut pieces pipes of material air filter,fire extinguisher, ms cattle guard solid and broken condition, various type sort and sizes & pneumatic pipe lines, cock valves, brake shoe, gear ring, pin, truck steering movable part, bush, universal joint, loose starter parts, clamp loose parts, gear, pressure plate, clutch plate, loose parts truck and moblie crane, jombo truck cover, gear box,steering base,and rod, etc. (non loco parts released from mw ii section) ms sheet, msr broken parts,condemned cup board (almirah), matrial rack,loco driver's seat, with miner ss attachments, ms chairs, tables, boards, bucket, gear case , screw coupling, brake liner, msu parts, nut bolts, voasher, ms patti,cp parts, rim, ms jali,ms bearing cover, rods, stopper, ms angle, cock, ms bearing, siling wire rope, mvmt,ocb dom,blore, locuker,air tank, air reservoir, various types and broken ms parts and miscellaneous items with or without loco and non-loco items with minor ss & aluminium or rubber attachments if any, in sort and sizes released from different sections as well as from electric locomotives. location scrap yard elw /bsl qty.30 mts approx

corporations/Associations/Others

CTN :45627573

22 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap defaced engine (4w),scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap empty catalytic converter,scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,scrap sheared body scrap(h),scrap catalytic converter as per list

corporations/Associations/Others

CTN :45541977

19 Jun, 2026 NA

Erode - Tamil Nadu

Tender For e-tender cum e-auction - scrap materials schedule - scrap matriels, used 20 lit.cap.empty paint tin., cond.plastic polythene paper cutting, used m.s big water tank(lorry tank)., used 18 lit.cap empty food oil tin., cond.brake linings and clutch linings, cond air tank., cond.water separator m.s.body (2500nos), used 18 lit.cap empty food oil tin., cond.unsize tyres lmv tyres - 8, two wheeler tyre - 3, used old m.s.angle,chassis pieces, channels,rods,pipes,steering wheels and m.s angle with g.p sheet frames, cond/old gp sheet cuttings,wire mes tar belt layer g.p sheet cuttings, broken silencer pipe,head light dom (as is where is condition), cond.seat frames,pipes,luggage carrier and ladders., cond.plastic polythene paper cutting, removal plywood pieces, cond.brake shoe some with lining, cond.brake drums., cond.iron dust & m.s.boarings, cond.frp items,head light doom, broken plastic cane and other plastic items., cond.used oil filter,diesel filter and air filters, cond.luggage carrier, rubber dust(buffing dust), cond.radiator(alu.core), cond.radiator inter cooler (alu.), cond.wheel disc with rings., cond.brake drum lathe without motor, cond.hat rack(wood), cond.12v 21p plastic battery., cond.12v 25p plastic battery., cond.10.00x20 rb tyre, cond.tube with mouth

corporations/Associations/Others

CTN :45537838

17 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For disposal of condemned scrap materials - dispoal of condemned scrap materials - june2026, cond scrap plastic paper & cunney bag, cond iron scrap corrosive parts, cond. old damaged beeding & rubber parts, cond scrap cylinder liner & disc brake plate, cond scrap wheel disc, cond scrap 21 plate plastic battery, cond scrap 25 plate plastic battery, cond scrap starter assy, cond scrap clutch viscos with fan, cond scrap turbo charger assy, cond scrap engine aluminium piston with iron connecting rod (as it is), cond scrap engine aluminium piston, cond iron scrap slack adjuster assy, cond iron scrap seat frame, pipes and angle pieces, cond scrap wiper motor assy (as it is), cond scrap electrical parts and wire, cond scrap white filter, cond scrap flap cut pieces, cond scrap tube cut pieces, cond scrap 10.00 x 20 radial tyre -254 nos & 295 x80 -102 (psi), cond scrap 10.00 x 20 radial tyre -109 nos (vnr)

corporations/Associations/Others

CTN :45522612

15 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap alloy wheel,scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap defaced engine (4w),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap empty catalytic converter,scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap leaf spring,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap defaced cng/lpg cylinder,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,scrap sheared body scrap(h),scrap catalytic converter as per list

corporations/Associations/Others

CTN :45424585

08 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap alloy wheel,scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap defaced engine (4w),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap empty catalytic converter,scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap leaf spring,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap defaced cng/lpg cylinder,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,used mix oil and fuel,defaced engine scrap (2w),defaced engine scrap (cv),scrap tyres with and without rim (2w),scrap sheared body scrap(h)

corporations/Associations/Others

CTN :45298521

27 May, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap alloy wheel,scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap defaced engine (4w),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap empty catalytic converter,scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap leaf spring,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap defaced cng/lpg cylinder,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,used mix oil and fuel,scrap catalytic converter as per list

Central Government / Public Sector

CTN :45255485

09 Jun, 2026 NA

Secunderabad - Telangana

Tender For supply, installation and commissioning of pre-wired modular workstation consisting of a single control office customized to equip two sads and two daws systems arranged and installed on a t-shaped modular workstation with integrated cable management systems as per specifications. specifications of modular workstation: 1) the workstation shall each be of 5 feet (l) x5 feet (w) the combined size: 10 feet (l) x 5 feet (w) - 1set, made of 25 mm nfc wood and 1 mm acrylic laminate. 2) the sads displays shall be installed such that the bottom edge of the display is at a height of 5' (approximate) from the floor. these shall be installed preferably along the longer edge of the t and facing the operators, 3) the daws system shall be installed such that it is possible to be used sitting at the workstation. 4) all interconnecting wiring for lan, power supply and telephones shall be done inside the cable management system (powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. communication accessories: i) lan rj45: 4 nos ii)telephone, rj11 : 4 nos iii) power supply, 5 amp sockets: 6 nos 5) all wires shall be brought out to interface boxes one for power supply and another for the communications cables. these boxes shall be designed to accept connections from the control room circuits. note: design, supply, fitment, installation, testing and commissioning shall have to done by the firm confirming to the pre-wired modular t- shaped workstation standards. material shall confirm to hpl/nfc engineered wood (25mm thickness) as per epd-ies-0012055:002 (s-p- 12055) certification. make: godrej interio/tumbi/greeken/moudulartek or its equivalent. [ warranty period: 30 months after the date of delivery ] ]

Communications Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors