Latest commutator Tenders | Government commutator Tenders

Central Government/Public Sector

CTN :45731733

10 Jul, 2026 NA

Vellore - Tamil Nadu

Tender For deburring brush of armature commutator mica under cutting for hyt mica under cutting machine as per drg.no.3tms/cnb/drg/2005/4 alt-1. [deburring & polishing wheel (standard type) for tm armature with standard wire dia. abrasive nylon bristles coated with silicon carbide; od-200mm, thick-20mm, bore-35mm x pcd 49.5 x 7mm, 04 screw holes for holding with spindle of deburring wheel.] note: -one sample to be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45736803

17 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For supply of gauge set ,set consisting of (1) check end shield bore dia commutator end gauge ,size: 710.00mm (+ 0.088/- 0.138) by go &no go, material tool steel to is:3748/90 , hardness-50/55 hrc with warranty /calibration certificate, qty :1 no . (2) check end shield bore dia pinion end gauge ,size: 696mm (+ 0.088/- 0.138)go&no go, material tool steel to is:3748/90 , hardness-50/55 hrc with warranty /calibration certificate, qty :1 no . [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45738153

11 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of drive shaft , driven shaft , vibrator side plate , vibrator sheaves , oil flinger disc , breather plug , driven shaft , oil seal sleeve , cover gasket , driven gear , drive gear , outer seal hsg gasket , oil seals , tube seal , oil level indicator , closure gasket , spacer coller , side skirt side clamp f hot sint screen , side skirt side clamp f cold sin screen , drive gear , tube seal , driven gear , motor sheaves

CTN :43830945

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of brush , speed indicator , toothed belt , knob , carbon brush , commutator , screw lp type resi thermo w/o neck , carbon brush , sealing for cover , carbon brush , direct current contractor , ring oil guyidance , aux.contactor , switch yaxely type , toggle , push hood red , push hood white , torsion spring , push hood yellow (pressure hood) , lamp pilot , fuse link , plate indicating , copper segment (contact piece) , toothed belt pulley , clutch electromagnetic , cam circuit element , switch position , terminal strip , conductor rail connector , handle (toggle) , dc contractor 2 pole , al capacitor 10000uf 63v , resistor , magnetic coupling , main contact complete , solenoid valve , side wall compl.(right) , bearing , emergency hand lever , circuit breaker (2000 amp)

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

Central Government/Public Sector

CTN :45732220

10 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For hs15250 commutator segment (slitted) as per clw drg. no.10s813-323a alt 11 or latest.

CTN :45527002

01 Jul, 2026 1.49 Crore

Pune - Maharashtra

Tender For corrigendum : supply of bipolar cable , haemostatic sponge gelatin 80 mm long 50mm broad 10 mm thick , head neck surgery pack contains usfda approved sterile split drape with tape size 175 cm 300 cm split 10 cm 100 cm 4 , large epistaxis packing 8 cm , small epistaxis nasal packing 3 point 5 cm , lina single skin hook small sharp lina medical , neck straps adjustable length and breathable for tracheostomy tube , spray universal micro motor and hand piece for cleaner and lubricant with spray head 500 ml , bioabsorbable hemostatic nasal pack , tracheostomy tube cleaning brush , silicone tracheostomy tube cuffed double lumen size 8 mm , tracheostomy tube with cuff with double lumen with fenestration with swivel neck plate decanullation , tracheostomy tube with cuff with double lumen with fenestration with swivel neck plate decanullation plug 7 mm , tracheostomy tube with cuff with double lumen with fenestration 7.0 mm , tracheostomy tube with cuff with double lumen 7.0 mm , tracheostomy tube with cuff with single lumen with decanullation plug 6.5 mm , tracheostomy tube with cuff with single lumen with decanullation plug 7.5 mm , tracheostomy tube with cuff with single lumen with decanullation plug 8.0 mm , tracheostomy tube with cuff with double lumen with fenestration decanullation plug 7 point 5 mm , tracheostomy tube with cuff with double lumen with , tracheostomy tube without cuff double lumen 8 mm , anti fog solution with 4 percent alcohol concentration , endotrach tube 7mm emg , endotrach tube 8mm emg , trachidress large , trachihold large , non rechargeable battery for bone conduction hearing implant , insert earphone for electrophysiology test , foam tip for bera , audiometer head phone , audiometer bone conduction vibrator , impedance audiometer probe , impedance audiometer printing paper roll , oae probe , oae tip , sound therapy system for tinnitus with all standard accessories as sr li7 , assistive listening device for single sided deafness with all standard accessories as g7 , cochlear implant advance bionic ci m30 coil cable , cochlear implant advance bionic ci m30 rechargeable battery , cochlear implant cochlea n6 coil cable , cochlear implant cochlea n6 rechargeable battery , cochlear implant cochlea n7 coil cable , cochlear implant cochlea n7 rechargeable battery , kanso 2 charger , teflon stapes piston , gold cup electrode for bera //bid details 2 / 41

Central Government/Public Sector

CTN :45708542

13 Jul, 2026 NA

Sonpur - Bihar

Tender For supply of bottom commutator cover for tr motor type 4303dy of demu/dpc as per drg. mo. -jmp/sk-06/12 [ warranty period: 30 months after the date of delivery ] ]

CTN :45726869

24 Jul, 2026 NA

Bokaro - Jharkhand

Tender For supply of contact segment asssembly.of commutator switch (ctf2) "t" type to clw's drg.no.3twd.101.108, alt.-4,sheet -1 and clw's drg.no.2twd.101.108, alt.2,sheet - 2. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45702797

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98414501: cond. & u/s. rotor (armature core of hitachi) of traction motors ,with copper coils, commutator shaft as is where is condition. (approximate weight: 24,375 kgs for 25 nos.) rate per number should be quoted and it will be delivered in number basis. note:,1) other scrap available in the location are not pertaining to this lot.2) crane/jcb loading permitted. location: w-54,w-55 of scrap yard /ssd/ptj

Commutator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector