Latest compressing ring Tenders | Government compressing ring Tenders

State Government

CTN :41209440

09 Aug, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of submersible pump 1.5 hp , submersible pump 2.0 hp , submersible pump 3.0 hp , control panel 1.5 to 2.0 hp , control panel 3.0 hp , pvc electric cable 2.5 sqm , pvc electric cable 4.0 sqm , empd gasket , electrical rotary hammer drill , electric angle grinder , hot air blower , cordless air blower , professional ratchet socket , industrial infrased thermometer , clamp multimeter , steel handle allen key set , industrial new t spanner , insulated screw driver tool set , cc10 240mm cable cutter , cc06 cable cutter , insulated combination plier , round nose plier , hacksaw blade frame 12 inch , title 24 , spanner set 23 pcs , ring spanner set 12 pcs , digital tester and line tester , measuring tape 25mm 10 meter , title 29 , sledge hammer with fibreglass handle , hammer 560grms and ballpin hammer 500gms , title 32 , rubber mechanic gloves , safety halmet with colour , multipurpose tool storage open mouth bag , safety goggles , heat shrink tubing kit , electronic wire ferrules , copper thimble ring brass , pvc electrical insulation tape 6.50m 60 pcs , shock observer electric safety shoes , portable gas blow lamp , 15mm rubber water proof tap , double acting air valve 50mm , double acting air valve 80mm , double acting air valve 100mm , pn 16 cast iron foot valve 80mm , pn 16 cast iron foot valve 100mm , pn 16 cast iron foot valve 125mm , pn 16 cast iron foot valve 150mm , 22mm thick 4 holded ms flange 80mm , 22mm thick 4-6 holded ms flange 100mm , 22mm thick 6 holded ms flange 125mm , 22mm thick 6-8 holded ms flange 150mm , 16 kg demolition hammer , angle hand grinder , cast iron nrv 80mm , cast iron nrv 100mm , cast iron nrv 125mm , cast iron nrv 150mm , mccb 400 amp ) /bid number : gem/2025/b/6494087 * /dated: 25-07-2025 & & / bid document 1 / 37

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

State Government

CTN :41242611

28 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of boq item 1 , boq item 2 , boq item 3 , boq item 4 , boq item 5 , boq item 6 , boq item 7 , boq item 8 , boq item 9 , boq item 10 , boq item 11 , boq item 12 , boq item 13 , boq item 14 , boq item 15 , boq item 16 , boq item 17 , boq item 18 , boq item 19 , boq item 20 , boq item 21 , boq item 22 , boq item 23 , boq item 24 , boq item 25 , boq item 26 ultrasonic homogenizer capacity (0.2-1000ml) converter model with 1/2" horn or 3/4" horn output power: 550 watts input power: 120v or 240v dimensions: 12.5" l x 7.5" w x 9.25" h weight: 14 lbs tube sealing machine 110v electric tube sealing machine material: stainless steel, plastic item weight: 19 kilograms power source: corded electric operatio mode: manual water bath 1litre material: stainless steel, acrylonitrile butadiene styrene (abs) voltage: 110 volts item length: 2e+1 centimetres color: white item weight: 4 lbs (1.8 kg) franz diffusion cell apparatus (franz cells) colour: clear number of memory sticks: 1 item weight: 250 g package dimensions: 19 x 9 x 9 cm; 250 g, item part number: franz_diffusion_cell franz diffusion cell vessel - capacity - (40 ml) franz diffusion cell apparatus (semipermeable membrane) visking tube semipermeable membrane for lab and experiment use 22mm 10 meter ab- 253-v10m franz diffusion cell apparatus (magnetic stirrer beads) material: (with pivot ring) octagonal round white ptfe stir bar(s) packaging: pack of 10 l x width: 20 mm 8 mm round porcelain kharal round porcelain kharal heating mantle (1l) capacity: 1 litre material: glass colour: blue white special feature: portable voltage: 220 volts heating mantle (2l) capacity: 2 litre material: glass colour: blue white special feature: portable voltage: 220 volts heating mantle (3l) capacity: 3 litre material: glass colour: blue ) /bid number : gem/2025/b/6509247 * /dated: 29-07-2025 & & / bid document 1 / 21

State Government

CTN :41217191

18 Aug, 2025 NA

Kheda - Gujarat

Tender For supply of mechanical measuring instruments & spanners (tools & tackles) at wtps - digital outside micrometer with large digital display. size : 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size : 25 - 50mm, resolution: 0.0001 mm., digital vernier calipers size - 0-300 mm mitutoyo make, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, taparia make: allen keys (mm.sizes) black finish ,is 3082-1988 sizes- 12 mm,14mm, 17mm, 19mm, 22mm, 24mm, adjustable spanners , 110 mm length ,least max. opening 13 mm, chrome plated, with soft grip, chain pipe wrench, taparia product no: cpw 06, length:1000 mm, suitable for pipe dia. 150 mm, hss drill bit set 3 mm to 12 mm, weighing scale digital, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 3mtr x red, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 5mtr x red, copper round bar of size 40mm x5oo mm long, polyester flat belt webbing sling with plain eye loops at both ends, conf. to bs: 3481/part-ii capacity: 5 ton, std length: 5 mtrs, bolt cutter length-450 mm, chain pulley block cap-1 ton x3 mtr lift, chain pulley block cap-2 ton light weight, chain pulley block cap 3 ton, lift: 4.5 m, mitutoyo make dial gauge with magnetic stand : 0-10mm, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 10 ton, rope dia: 32 mm, std. length: 2 mtrs, taparia make t handle hex key. product no. tak 5., taparia make t handle hex key. product no. tak 6., torque wrench standard generally confirming to is 6789:2008 mac master product no-tw-2000r (range-1000-2000 lb.ft/135-275 kgf.m/1350-2700 n.m), torque wrench standard generally confirming to is 6789:2008 taparia product no-tw1000 (range-400-1000 lb.ft/55-140 kgf.m/540-1380 n.m), allen key set black finish of inch eries having sizes 1/16" , 5/64" ,3/32" , 1/8",5/32",3/16",7/32",1/4",5/16",3/8" allen keys, grease gun, polyester webbing slings heving specification capacity- 1tons,length-3mtr and width-50mm (max), screw spanner-12", non sparkable fixed spanner set : size: 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32., fix spanner size 12x13 mm ., ring spanner size 12x13 mm, fix spanner size 10x11 mm, jhalani/tapariaring spanner 10x11 mm, fix spanner size 14x15 mm jhalani make, fix spanner 16x17 mm, jhalani/tapariaring spanner 16x17 mm, fix spanner 18x19 mm, jhalani/tapariaring spanner 18x19 mm, fix spanner size 24x26 mm, ring spanner size 24x26 mm, fix spanner 30x32 mm, ring spanner 30x32 mm, steel wire rope sling with soft eye splice at both ends, conf. to is: 5245/part-ii capacity: 1 ton, rope dia: 10 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 2 ton, rope dia: 16 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 5 ton, rope dia: 22 mm, std. length: 5 mtrs, circlip plier external (bent nose),product no: 1444.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, internal circlip plier size 8" no1440 taparia make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, hanna make tds tester (0-2000 ppm), model: hi98301, hanna make ph meter, model: hi98107

Central Government And Public Sector

CTN :41267500

05 Aug, 2025 NA

Guwahati - Assam

Tender For supply of heavy duty high tenacity 100 percent polyester four leg nylon sling one suspended from steel main ring and the individual end will be fitted with forged d shackle and one hook of each leg along with heavy duty

Central Government/Public Sector

CTN :41230472

07 Aug, 2025 70.9 Thousand

Mumbai - Maharashtra

Tender For supply of uniball pen , ring folder plastic , hole guard , clip board plastic , pencil 2b , add gel pen , eraser , sharpener , stapler small , stapler big , stapler pin big , single pin small , scale steel , scale plastic , single punch , double punch , paper cutter , scissor medium , carbon paper blue , bond paper a4 , file tag small , file tag big , ink pad blue , permanent marker blue , white board marker , highlighter , correction tape , whitener pen , paper pin , binder clip 25 mm , binder clip 35 mm , binder clip 41 mm , sketch pen , notice board pin , fevicole tube 50gms , executive sign folder , cello tape 1 , ohp marker , photo glossy paper , tracking paper roll , gum bottle 150 ml , cello tape distemper , pen stand wooden , fevi quick , plastic flag 5 colour , envelope brown 6x4 inch , envelope brown 9x4 inch , envelope brown 12x5 inch , envelope cloth a4 , envelope cloth fs , envelope cloth a3 , florescent paper a4 , double side tape , calculator , register 2 qr , register 3 qr , register 4 qr , box file , cello ball pen , v7 hi tech pen ) /bid number : gem/2025/b/6491429 * /dated: 28-07-2025 & & / bid document 1 / 41

Central Government/Public Sector

CTN :41242556

12 Aug, 2025 69.1 Thousand

Lakshadweep - Lakshadweep

Tender For supply of statonery items e e - qlamination sheets , drawing pin , board ribbon , glue stick , paper cutter , high lighter pen , fevi kwik , pencil 2b , eraser , sharpener , scissor small , single punch , double punch , ball pen blue , ball pen black , ball pen red , gel pen blue , stick on pad 5 nos , stapler small , stapler big , stapler pin small , stapler pin big , whitener , white board marker , permanent marker , ohp marker black or blue , file tag small , file tag big , scale steel , signal folder , packing tape or brown tape , ring binder folder , pen stand , 4 colour prompts or flags , signature folder , clip pad plastic , double side tape , register 2 qr , register 3qr , register 4qr , uniball gel pen blue , uniball gel pen green , uniball gel pen red , l folder

Central Government/Public Sector

CTN :41194419

04 Aug, 2025 NA

Medak-T - Telangana

Tender For supply of super duplex stainless steel plates d d - core axial locking key cutting tg9713814010 , plug for water filling dry dock m10 tg9716114060 , cover plate debris removal tg9716114052 , water bearing cap cutting tg9711034026 , srtb outer support ring cutting de tg9716914091 , srtb inner support ring cutting de tg9716914105 , srtb locknut cutting de tg9714874149 , water bearing circlip cutting tg9711164019 , propeller inboard seal ring cutting tg9716914083 , propeller locknut ring washer cutting tg9716114044 , propeller outboard guard cutting tg9716114036 , propeller inboard guard cutting tg9716114028 , water bearing lipseal retainer cutting tg9717114013 , superduplex ss mock up block 12 x 150 x 150 tg9710464213 , cable holder clamp assembly type 1 tg9710043439 , cable holder clamp assembly type 2 tg9710043447 , cable holder clamp assembly type 3 tg9710043455

Central Government/Public Sector

CTN :41258848

09 Aug, 2025 NA

Vellore - Tamil Nadu

Tender For supply of c040126 round head notch ag 100v,c040141 casing ag 100v,c040140 circlip ag 100v,c040135wheel guard ag 100v,c040134 wheel front flange ag 100v,c040133 wheel rear flange ag 100v,c040132 helisert ag 100v,c040131 helisert ag 100v,c040130 o ring ag 100v,c040129 o ring ag 100v,c020632 ball bearing b 7z ag 100v,c020119 ball bearing b 6 ag 100v,c040125 outer snap ring ag 100v,c040124 inner space ring ag 100v,c040123 internal snap ring ag 100v,c040122 key ag 100v,c040121 roll pin ag 100v,c040119 allen head bolt ag 100v,c040118 allen head bolt ag 100v,c040117 allen head bolt ag 100v,c040116 front cover ag 100v,c040115 wheel spindle ag 100v,c040114 front plate ag 100v,c040113 blades ag 100v,c040112 rotor ag 100v,c040111 cylinder ag 100v,c040110 rear plate ag 100v,c040109 cone spring ag 100v,c020121 roll pin ag 100v,c020505 steel ball ag 100v,c040106 oil plug by grub screw ag 100v,c040105 air inlet bush ag 100v,c040104 throttle trigger ag 100v,c040103 valve rod ag 100v,c040102 valve bush ag 100v,c040101 casing ag 100v

corporations/Associations/Others

CTN :41204378

04 Aug, 2025 NA

Kolkata - West Bengal

Tender For centralized rate contract for two (02) years of spares of sam turbo make pumps installed in ash handling plant of dvc - impeller with screw & hub cap : part no : -18 & 38, 58 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), fasteners set (total quantity of fasteners applicable for one bare ba overflow transfer pump, model : arl 200/410 ) : part no : -na : material: - ms / hts, lock washer (p.end) : part no : -63 : material: - is 1363 ms, piston ring : part no : -51 : material: - is 210 fg 200, key (coupling) : part no : -32 : material: - bs 970 en 8, laybrinth (drive end) : part no : -24 c : material: - astm a 216 gr wcb, coupling set [od 280 mm] : part no : -na : material: - is 210 fg 200, base with top cover : part no : -1 & 2 : material: - is 210 fg 200, volute casing : part no : -17 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), lock nut (p.end) : part no : -60 : material: - is 2062 c 15, grease nipple : part no : -48 : material: - steel, lock washer : part no : -47 a : material: - is 1363 ms, check nut : part no : -47 : material: - astm a 216 gr.wcb, key (shaft sleeve / impeller) : part no : -31 : material: - aisi 304, bracket side cover : part no : -25 : material: - astm a 216 gr wcb, laybrinth (pump end) : part no : -24 : material: - astm a 743 cf8, shaft sleeve : part no : -12 : material: - aisi 410 (h), gland : part no : -10 : material: - astm a 216 gr.wcb, grease retainer : part no : -7 : material: - is 210 fg 200, wear plate (b.side) : part no : -16 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), pump shaft with keys : part no : -4 : material: - bs 970 en 8, lantern ring : part no : -13 : material: - aisi 410, gland housing : part no : -9 : material: - alloy ci (290 - 320 bhn), end cover : part no : -5 : material: - is 210 fg 200, ba overflow transfer pump complete without motor, model-arl 200/410, earlier pump sl.no.-16804-16805, head:20mwc, capacity: 320 cubic meter/hr., size:200x200., o ring set (1 set=8nos.), for ba overflow transfer pp, model of pump-arl 200/410, shaft sleeve : part no : 53.6 : material : aisi 410, impeller with nut & helicoil insert : part no : 24.2 : material : is 318 gr.i, bearing housing lantern : part no : 35.6 : material : is 210 fg 200, bearing bed : part no : 36.7 : material : is 210 fg 200, bearing cap(outer) : part no : 37.2 : material : is 210 fg 200, bearing cap(inner) : part no : 37.3 : material : is 210 fg 200, oil seal set (1set = 2 nos) : part no : 43.13 & 43.3 : material : syn. rubber, impeller nut with helicoil insert : part no : 93.4 & 94.21 : material : aisi-316, wear ring (casing) : part no : 51.4 : material : is 318 gr.ii, wear ring (casing cover) : part no : 51.23 : material : is 318 gr.ii, key(coupling) : part no : 95.2 : material : bs 970 en8, circlip : part no : 94.23 : material : spring steel, grooved nut & lock washer : part no : 93.3 & 94.03 : material : sae 1018/1020 is 513 crca sheet, gland : part no : 46.4 : material : is 210 fg 260, pressure ring : part no : 46.9 : material : aisi 410, lantern ring : part no : 46.10 : material : aisi 410, gland packing set (1set = 4 nos) : part no : 47.3 : material : tiga, fastners set [total quantity of fastners applicable for one bare ash conditioner water pump, model : cpc 80/400 ] : part no : na : material : ss, key(impeller) : part no : 95.03 : material : aisi-316, key (sleeve) : part no : na : material : aisi-316, gasket set (1set = 4 nos) : part no : na : material : caf-9/ paper oil resist, volute casing : part no : 11.4 : material : is 210 fg 260, pump shaft with keys : part no : 22.3 : material : bs 970 en8, disc (impeller) : part no:550 : material :-ansi-316, gland : part no:452 : material :-astm a 743 gr.wcb, lantern ring : part no:458 : material :-aisi 410, key (impeller / shaft) : part no:940.01 : material :-aisi 316, lock washer : part no:931 : material :-sae 1018/1020, bearing cover (n.d.e) : part no:360.01 : material :-ast

Compressing Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors