Latest computer ink Tenders | Government computer ink Tenders

State Government

CTN :40279010

16 Jun, 2025 193

Bengaluru - Karnataka

Tender For e- tender for supply of spine, fms other implants high end - frame plate 3d (micro plates 0.2mm - 0.8mm), dermal matrix wound dressings size 10x25cm, dermal matrix wound dressings size 10x12.5 cm, dermal matrix wound dressings size 5x5 cm, jess fixators for hand fracture, suture anchors (for tendon achilles repair), rack for 8 instruments with clamp box, instrument case 130 x 230 x 25mm, micro scissors straight scissor blade 10mm, forceps with plateau tip 0.3mm smooth, micro forceps with plateau tip 0.6mm angulated, micro scissors curved - scissor blade 10mm, double clamps 24mm, 1.5 - 2.3mm vessel, double clamps 16mm, 1.0 - 2mm vessel, double clamps -11mm, 06-1.4mm vessel, single clamps 24mm, 0.6 - 1.4mm vessel, single clamps 16mm, 0.6 - 1.4mm vessel, microvascular single clamps 11mm, 0.6 - 1.4mm vessel, calcaneal fracture fixation plate and screws, lisfranc plate and screws, first 1st mtp fusion plate and screws, lapidus fusion plate and screws, mini tight rope for mallux valgus, ankle fusion plates, fibre wires, achilles tendon repair by speed bridge, foot plates, memory staples, tenodesis screws, syndesmosis repair with tight rope, suture anchors for brostrum repair, internal brace for brostrum repair, deltoid ligament repair using suture anchors, deltoid ligament repair with internal brace, autocart - all autologous cartilage regeneration, suture anchors for achilles tendon 5.5 mm double loaded with needles, extra osseous talotarsal stabilization (eotts) implant (sinus tarsi screw), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (large 2mm to 2.8mm), a)10 hole continuous plate (large 2mm to 2.8mm), a)6 hole with gap (large 2mm to 2.8mm), a)4 hole with gap (large 2mm to 2.8mm), a)3 hole with gap (large 2mm to 2.8mm), a)2 hole with gap (large 2mm to 2.8mm), h plate (large 2mm to 2.8mm), l plate right and left (large 2mm to 2.8mm), titanium strut plate 18 hole (large 2mm to 2.8mm), double y plate (large 2mm to 2.8mm), y plate (large 2mm to 2.8mm), a)20 holes adaptation plate (large 2mm to 2.8mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (medium plates 1mm-2mm), a)10 hole continuous plate (medium 1mm to 2mm), a)6 hole with gap (medium 1mm to 2mm), a)4 hole with gap (medium 1mm to 2mm), a)3 hole with gap (medium 1mm to 2mm), a)2 hole with gap (medium 1mm to 2mm), h plate (medium 1mm to 2mm), l plate right and left side (medium 1mm to 2mm), titanium strut plate 18 holes (medium 1mm to 2mm), x plate (medium 1mm to 2mm), double y plate (medium 1mm to 2mm), y plate (medium 1mm to 2mm), a)20 holes adaptation plate (medium 1mm to 2mm), orbital mesh (0.2- 0.4mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (micro plates 0.2mm - 0.8mm), a)10 hole continuous plate (micro plates 0.2mm - 0.8mm), a)6 hole with gap (micro plates 0.2mm - 0.8mm), a)4 hole with gap (micro plates 0.2mm - 0.8mm), a)3 hole with gap (micro plates 0.2mm - 0.8mm), a)2 hole with gap (micro plates 0.2mm - 0.8mm), titanium strut plate 18 holes (micro plates 0.2mm - 0.8mm), x plate (micro plates 0.2mm - 0.8mm), double y plate (micro plates 0.2mm - 0.8mm), y plate (micro plates 0.2mm - 0.8mm), a)20 holes adaptation plate (micro plates 0.2mm - 0.8mm), orbital rim (micro plates 0.2mm - 0.8mm), deformity reduction set, cobalt chromium rods 5.5 mm x 400 mm, mis battery or manual operated disc aspirator 1-2.5 mm, with 0.5 mm increment 13 - 19 gauge with 2mm increment straight or curved, anterior peek cervical standalone cage, intergrated peek cage with titanium screw locking mechanism 6mm-12mm length, self locking screw mechanism, 35 degree screw angulation cephedal to caudal, self drilling screws 3.5mm, 4mm, mis polyaxial set scerw accomadating 5.5mm rods, mis contoured or straight rods dia 5.5mm with sharp edge for edge for easy insertion, mis polyaxial screw with attachment option of plastic retractor for direct imaginga and visualization of rod, modified design for set screw insertion dia 5 t

Central Government / Public Sector

CTN :40500611

06 Jun, 2025 NA

Bhubaneswar - Odisha

Tender For cobalt drill bit, m42, size: 4.50mm dia. matl. & spec. : is: 5101 / din-338. note:sample shoul d be get approved by consignee before bulk supply [ warranty period: 30 months after the date of delive ry ]

Central Government/Public Sector

CTN :40491192

06 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For supply of cobalt metal

CTN :40491594

17 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of solid carbide with cobalt 12% end mill dia 8 mm x 2 deg. tapper length 25 x 4 flute x fl 30 x oal 9

Central Government/Public Sector

CTN :40447178

13 Jun, 2025 NA

Gwalior - Madhya Pradesh

Tender For supply of chemicals - palladium chloride , dimethyl glyoxime , copper i chloride , n o-bis trimethylsilyl trifluoroacetamide , 2-chlroethyl ethyl sulfide , spherical silica gel 40-75um partical surface area 250-300 m2perg , sodium hydroxide pellets , cobalt chloride hexahydrate asc reagent

Central Government/Public Sector

CTN :40485154

05 Jun, 2025 NA

Kanakapura - Karnataka

Tender For supply of high speed steel high cobalt content drill bit 5.2mm, as per drawing: din 338, other details as per enclosed annexure-mp/spec-01/12/rev-01 dated-22.06.2017. to be pur chased from oem or the authorised dealers of oems [ warranty period: 30 months after th e date of delivery ]

Central Government/Public Sector

CTN :40459616

09 Jun, 2025 NA

Bhavnagar - Gujarat

Tender For supply of hss drill parallel shank supper jobber drill size: 4.5 mm dia as per is: 5101-1991 m35 (hss with 5 percent cobalt & 63-66 hrc) make j.k.files & tools or miranda or addison only [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40390447

02 Jun, 2025 8.88 Lacs

Multi City - Karnataka

Tender For procurement of tools - extension bar 1/2inch, sludge hammer 14lb, allen key set 3 mm to 28 mm, portable hand drilling machine, jigsaw blade t121af, jigsaw blade t118b, bosch cutting machine, magnetic drilling machine, heavy duty grinding machine, screw driver 824, hand vice groz hv/125, des sledge hammer 8 lbs, bench drilling m/c, item name grinding machine 4 inch, jigsaw machine, long neck strt grinding m/c, angle grinder 100mm size, adjustable wrench set, heavy duty bench vice 300mm, spec bearing puller(5tonne,3leg), spec bearing puller 14 inch, spec bearing puller(2tonne,3leg), item name 3 jaws bearing puller set, sq drive 19mm hex adaptor 1 inch, spec sq drive 14mm hex adaptor 1 inch , spec circlip plier (int & ext), spec circlip plier extrnal 9 inch bent jaw, spec circlip plier internal 9 inch st jaw., blower , industrial, flaring tool, flaring tools id 37.5mm, sledge hammer 16lbs, ratchets 1 inch, ratchets 3/4 inch, revers. ratchet 19mm sq drive, bi hexagon box spanner set, spec slugging ring spanner 75mm, spec slugging ring spanner 41 mm, spec slugging ring spanner 30 mm, spec slogging offset spanner 75 mm, spec slogging ring spanner 55 mm, spec slugging ring spanner 46 mm, spec slugging ring spanner 36 mm, spec slugging ring spanner 70 mm, spec slugging ring spanner 60 mm, spec slugging ring spanner 50 mm, spec slogging ring spanner 65 mm, tubular spanner 6mm to 32mm, ratchet(reversible) size 1/2 inch, exel hexagonal socket set, spec slugging open end spanner 34mm, spec slugging open end spanner 32mm, spec slugging open end spanner100mm, spec slugging open end spanner30 mm, open end slugging spanner 95mm, spec slugging open end spanner 90 mm, single ended spanner 55mm, spec slugging open end spanner 77mm, spec single end d spanner 65mm, spec slugging open end spanner 58mm, spec slugging open end spanner46 mm, spec slugging open end spanner 36mm, open end slugging spanner 85mm, spec single end spanner 80 mm, spec slugging open end spanner 70mm, spec slugging open end spanner 60mm, spec slugging open end spanner 67mm, spec slugging open end spanner 50mm, cutting pliers (taparia), item name pneumatic impact wrench, bi hexagonal socket set, torque wrench 7 kg m to 35 kg m, torque wrench 5 kg m to 23 kg m, heavy duty hexagonal sockets, chain wrench heavy duty 36 inch, pipe wrench 30 inch, adaptor (3/4 inch 1/2 inch ), half round files (smooth) 12 inch , triangular files smooth 12inch, triangular files rough 12inch len, round files (rough) 12inch len, half round files rough 12 inch, flat files (smooth) 1inch x 12 inch, flat files (rough) 1inchx12inch, long feeler gauge 12 inch, feeler guage set 0. 05 to 1 mm, pitch gauge 1/64 inch to 3/8 inch, pitch gauge 0 .25 to 10 mm, engineers square 300 mm, engineers square 150mm, spirit level 1000mm length, dial gauge 0(point)01 to 5mm, lever type dial gauge, dial gauge with magnetic stand, item name steel rule 600mm, radius gauge, vernier caliper 0 to 280mm, outside micrometer 300mm to 400mm, spec hss cobalt grade m33 tap set, spec hss cobalt grade m30 tap set, spec hss cobalt grade m27 tap set, spec hss cobalt grade m24 tap set, spec hss cobalt grade m22 tap set, spec hss cobalt grade m6 tap set, spec hss tap set m18, spec hss tap set m16, spec hss tap set m14, spec hss tap set m12, spec hss tap set m10, spec hss tap set m8, spec hss tap set m5, des hss tap set m4, adjustable tap handle, outside calipers, inside spring calipers 600mm, extension bar 1763, pipe wrench 24 inch, extension rod 3/4 inch, spe hssdrill bit set

State Government

CTN :40427723

05 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of hydroxide pellets 5000gm , sodium nitrate 500gm , sodium nitrite 500gm , sodium fluoride 500gm , sodium arsenite 98 percent 100gm , zirconium oxychloride octahydrate 99 percent arite 500gm , spadns2 trisodium salt 5g , stannous chloride dehydrate 100gm , starch powder 500gm , sucrose 500gm , sulfuric acid 1000ml , sulfuric acid 2500ml , iodine solution 1000ml , sulfanilamide 500gm , sulfuric acid 5000ml , zirconium oxychloride octahydrate 99 percent 100gm , boric acid 500gm , boric acid 5000gm , potassium dihydrogen phosphate 500gm , magnesium sulphate 500gm , dipotassium hydrogen phosphate 500gm , disodium hydrogen phosphate 500gm , calcium chloride 500gm , ferric chloride 500gm , sodium thiosulphate 500gm , sodium sulfate 500gm , sodium sulfate 5000gm , primarysecondaryamine 1000ml , ethyl acetate 1000ml , nhexane 1000ml , methanol 1000ml , acetone 1000ml , toluene 1000ml , acetonitrile 1000ml , dichloromethane 1000ml , isopropanol ipa propan2 99 percent 1000ml , petrolum ether 1000ml , primary secondary amine psa 1000ml , n hexane 1000ml , toluene1000ml , iso propanol ipa propan2 99 percent 1000ml , nitric acid 1000ml , hplc water 1000ml , distilled water 5lit , distilled water 20lit , aas standard for sodium 100ml , aas standard for potassium 100ml , aas standard for copper 100ml , aas standard for cadmium 100ml , aas standard for chromium 100ml , aas standard for cobalt 100ml , aas standard for zinc 100ml , aas standard for lead 100ml , aas standard for iron 100ml , aas standard for molybdenum 100ml , aas standard for nickel 100ml , aas standard for manganese 100ml , aas standard for aluminium 100ml , aas standard for boron 100ml , standard for mercury hg analyser 100ml , calibration standard turbidity solution1000 ntu 500ml , ph buffer 4point00 ph 100ml , ph buffer7point00 ph 100ml , ph buffer 9point00 ph 100ml , conductivity standard 1point413 ms per cm 100ml , conductivity standard 12point88 ms per cm 100ml , conductivity standard 111 point 8 ms per cm 100ml , phosphorus aas standard solution1000 mg per l 100ml , total phosphorus standard 75 mgperl 100ml , potassium hydrogen pthalate , sodium chloride , calcium carbonate , sodium carbonate , multi ion ic standard 7 components 1000mgperl , piano hydrocarbonanalysesmixture100ml , fluorideicstandardf1000mgperlinh2o100ml , potassiumdichromate45gm , gammahch1000microgramperml , gammachlordane1000microgramperml , endosulfan11000microgramperml , endosulfan21000microgramperml , ddt1000microgramperml , oxyflurofen1000microgramperml , dieldrin1000microgramperml , endosulfansulfate1000microgramperml , heptachlor1000microgramperml , hexachlorobenzene1000microgramperml , methoxychlor1000microgramperml , imidacloprid1000microgramperml , epa531point1carbamatemixmulti , epaclporganochlorinepesticidesmix , 1dichloro22bis4chlorophenylethane , napthalein 100 gm , caffaine 100 gm , desiccant 1000 gm , labolene solution phosphate free 5000 ml , potassium chloride 500gm bid details/ 2 / 97

Central Government And Public Sector

CTN :40383455

28 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For supply of to cryogenic ultrta low heat treatment size 1 by 2 inch x 6 inch long x 10 percentage cobalt , item no. 33-hss cutting tool bits square ends harderned ground to cryogenic ultrta low heat treatment size 5 by 8 inchx 6inch long x 10 percentage cobalt , item no. 34-wheel grinding silicon carbide 150 x 25 x31.75 mm 4200 rpm fine , item no. 35-wheel grinding silicon carbide 150 x 25 x31.75 mm 4200 rpm rough , item no. 36-threading die nut 1 by 2 inch bsw , item no. 37- threading die nut 7 by 8 inch bsw , item no. 38-threading die nut 3 by 4inch bsw , item no. 39- revoling center mt 5 , item no. 40-carbide tipped bar turning tools116 gradep30-rh-1212. , item no. 41-carbide tipped bar turning tools 116 gradep30-lh-1212. , item no. 42-carbide tipped cranked round noseturning tools 115 grade p30-rh-1212 , item no. 43-miranda make carbide tipped straightround nose turning tools 113 gradep30-1616 , item no. 44- carbide tipped cranked turning and facingtools conforming to iso 2 111gradep30-lh-1212 , item no. 45-carbide tipped cranked turning and facingtools conforming to iso2 111gradep30-lh-1616 , item no. 46-parallel shank end mill cutter size 3mm dia x 10mm length x 42mm overall length , item no. 47- straight shank end mill cutters 6mm dia , item no. 48-end mill cutter 8 mm , item no. 49-hss straight shank end mill cuttersaddision 5 mm dia with 5 mm parallel , item no. 50-hss parallel shank end mill cutter stdseries , item no. 51-addison hss parallel shank end millcutters , item no.52- twist drill 3mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no.53-twist drill 6mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no. 54-twist drill 12mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no. 55-twist drill 10mm dia 2 flutes straightshank micrograin solid carbide coatedwith titanium aluminium nitride tialn , item no. 56-end mill cutter 4 mm dia , item no.57- 1parallel shank cutter hss end mill as perbs 122 1953 is 6353-1991 , item no.58-bimetal band saw blade , item no. 59- miranda make bimetal band saw blade coil

Computer Ink Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors