Latest concentric reducer Tenders | Government concentric reducer Tenders

CTN :43057333

31 Dec, 2025 NA

Jamalpur - Bihar

Tender For corrigendum : supply of end fitting straight

Central Government And Public Sector

CTN :43308299

27 Dec, 2025 NA

Rangapara - Assam

Tender For 1. supply installation & commissioning of 04- legged chain sling for eot crane, capacity- 20 tons, length- 11.5 feet, end fitting type- one side thimble and other side hooks, all the above components are grade 80 alloy steel. make/brand- usha martin, safelift or similar.

CTN :43306399

17 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of inconel 600 inconel 600 sorf flanges , inconel 600 loose flanges , inconel 600 raised face blind flanges , inconel 600 sch 40 seamless long radius elbow , inconel 600 sch 40 seamless bw equal tee , inconel 600 sch 40 seamless stub end , inconel 600 sch 40 seamless bw , inconel 600 sorf flanges , inconel 600 sch 40 seamless concentric reducer

CTN :43306714

02 Jan, 2026 NA

Rajauri - Jammu And Kashmir

Tender For supply of black paint , red paint , green paint , white paint , red oxide paint , pvc laminated gypsum false ceiling panel of size 595 x 595mm x8 mm thick with water proofing film on back side , pvc elbow 20 mm , pvc pipe 20 mm 3 mtrs long , pvc conduct pipe 25 mm 10ft long , pvc bib cock 20 mm , mattress of size 1880mm x 890mm , binding wire , pbs roll , vetrified floor tiles of size 600x600x10mm thick , pvc waste pipe 32mm dia for wash hand basin , iwc one vitreous china squatting pan , ldpe sheet 30inchx30inch , synthetic hdpe sand bags khaki colour proofed of size 84 cm x 36 cm , cgi sheet 12ft x 3ft , charcoal powder , gi socket 65mm dia medium grade , gi socket reducer 25x15mm medium grade , m seal 100 gm pkt , nails 100mm long , nails 25mm long , nails 50mm long , back fill compound , welding rod 50cm long , sds screw 2 inch , nut and bolt 1 inch , hinges 100 mm , cp bip tap 20mm , gi end cap 15mm , gi end cap 20mm , gi end cap 25mm , gi socket 15mm dia medium grade , gi socket 25mm dia medium grade , ss door handle 4 inch , commercial plywood 6ft x 3ft x 12mm thick , commercial plywood 6ft x 3ft x 6mm thick , commercial plywood 6ft x 4ft x 6mm thick , gi socket 20mm dia medium grade , gi socket reducer 20x15mm medium grade , gi nipple 150mm long 20mm dia , gi tank nipple 20mm , float valve brass 20mm dia isi marked , hdpe rotational moulded polyethylene water storage tank with lid cylindrical vertical tank double layers of capacity 1000 ltr , steel pad lock door lock 75 mm size five lever with three nos of keys , steel pad lock door lock 30 mm size five lever with three nos of keys , ms j hook isi marked , gi l bend 25 mm , cp stop cock 15mm dia , cp bib tap 15 mm , urinal waste pvc pipe with funnel , window glass , oil bound distemper cream colour , thinner 800 , paint sand colour , og paint , fevicol make , paint brush of ) /bid number: gem/2025/b/7033423 * /dated: 22-12-2025 & & / bid document1 / 70size 75mm , paint brush of size 100mm , white cement , taflon tape isi marked , cartridge for dcp fire extinguisher 1 kg , aluminium dip stick 2 pt 5 mtrs long isi marked , aluminum strip 25x3mm isi marked , fire extinguisher 1 kg , fire extinguisher 2 kg , candle 20 inch x 4 pt 5 inch for ro plant , dosing chemical , sand carbon filter capcity 104 ltrs and 27 pt 5 gallon , rock salt isi marked , padestal fan 400mm , led bulb 23w , pvc insulated cable 1 pt 5 sqmm multi strand copper conductor , pvc insulated cable 1 sqmm multi strand copper conductor , pvc insulated cable 6 sqmm 2 core copper , pvc flexible wire , pvc insulated cable 4 sqmm multi strand copper conductor , pvc insulated cable 2 pt 5 sqmm multi strand copper conductor , change over switch four pole 32 amp 415v 50hz , led tube light fitting 4 ft long 36 watt complete set with electronic choke , led tube light 20 w 4 ft long , 15 amp socket , pvc caping and casing 25mm 2 mtr long , 5 amp socket , led street light 50 w , switch and socket combination 15 amp 5 pin , switch and socket combination 5 amp , switch piano type 5 amp , switch piano type 15 amp , change over switch 63 amp 2 pole on load in sheet enclosure with side handle , mcb 6 amp sp , mcb 10 amp sp , mcb 16 amp sp , mcb 32 amp dp , mcb 63 amp dp , plug three pin top 5 amp , exhaust fan 300 mm , pvc square box 4 inch x4 inch , led panel ceilling light 2 ft x2 ft recess type 36w , change over switch four pole 100 amp 415v 50hz , pvc switch board 10 inch x 12 inch isi marked , batten holder , led bulb 20 w , led bulb 15 w , led bulb 5 w , led bulb 12 w , ceiling fan condenser , insulation tape 19mm wide , angle holder , pendent holder , wooden switch board 6 inch x 4 inch , wooden switch board 4 inch x 4 inch , main switch 100 amp dp , plug 3 pin 15 amp

State Government

CTN :42940915

06 Jan, 2026 69.73 Lacs

Umaria - Madhya Pradesh

Tender For corrigendum : procurement of erw ferrules and carbon steel erw sleeves for tubular type air pre-heater of unit no. 1 to 4 for ph-i, ii at sgtps, mppgcl, birsinghpur. - carbon-steel ferrule for tubular aphmaterial:- erw carbon steel tubes as per bs:3059:part-ierw-320 fully killed steelfor fitting in top end tube ferrules, o d: 57.5 mmthickness: 2.25 mmlength: 250 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/a/01, o d: 57.5 mmthickness: 2.25 mmlength: 100 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/a/02, carbon-steel sleeves for tubular aphmaterial:- erw carbon steel tubes as per bs:3059:part-ierw-320 fully killed steelfor fitting in top end tube ferrules, o d: 52 mm ,thickness: 3 mmlength: 250 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/b/01, o d: 52 mm ,thickness: 3 mmlength: 100 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/b/02, .

State Government

CTN :43280790

02 Jan, 2026 NA

Purulia - West Bengal

Tender For supply and fitting fixing of cable end box and other allied works under manbazar-i, harekrishnapur water supply scheme under pmd, phe dte.

Central Government/Public Sector

CTN :43255635

29 Dec, 2025 NA

Ernakulam - Kerala

Tender For supply of cs blk butt weld erw concentric reducer

Central Government/Public Sector

CTN :43270345

10 Jan, 2026 16.04 Lacs

Dipka - Chhattisgarh

Tender For supply of procurement of spares for rack loading system silo : : 5 =5 = - uhmw guide bar for emergency gate part no m010000937 , pressure sensor for hydraulic power pack part no e180000022 , 1point5 inch hp hose with end fitting for manifold part no mah060000007 , hydraulic cylinder for surgebin gate part no mah0124dgdpk , 1point5 inch flow control valve part no mah110000002 , 8 channel 1 no nc relay module part no e060000033

CTN :42968012

25 Dec, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w

CTN :43277056

12 Feb, 2026 NA

Kharagpur - West Bengal

Tender For supply of set of end pieces for pipe fitting consisting of 11 items:- threaded end piece as per clw's drg. no.- 0/3/65/15 (alt.-4 or latest) & threaded end piece as per clw's drg. no.- clw/ac/126. (alt.-5 or latest). (detail are as per enclosed annexure no.- end piece- 6).

Concentric Reducer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector