Latest consoles Tenders | Government consoles Tenders

CTN :41541784

12 Sep, 2025 NA

Bastar - Chhattisgarh

Tender For supply of firing consoles & countdown systems

CTN :41445724

25 Aug, 2025 NA

Agra - Uttar Pradesh

Tender For providing of repair and overhauling service - repair and overhauling service - repair of riu; repair of riu; yes; buyer premises (a) power section of riu is faulty. (b) rectification, software loading, onsite installation and functional check is required to be done. (c) following point will be covered in the functional check. (d) riu must be booting with monitor, keyboard and mouse access. (e) riu must have all front panel showing correct indications. (f) riu must be servicable for 4 r/t channels. (g) riu must have all connection, connectors and related accessories. (h) riu must have all related saoftware like mafi riu radio server, riu ip server, phone etc to operate all 4 channels. (i) riu must be able to link with existing mafi netwiork and ping with both vccs and virtual server. (j) riu must communicate with all ows consoles placed at different location. (k) riu must not face problem of ptt stuck / continues ptt for any channel. (l) riu must not need to reboot for smooth operation. (m) riu must be glow sync led with existing ofc connection. (n) riu must be configured to operate with m-7 radio.

CTN :41425990

03 Sep, 2025 NA

Agra - Uttar Pradesh

Tender For tender for supply of iff switch , comm line prot cct assy , radar wave form generator , low noise excitor , receiver down converter (l-band) , signal processor pcb assy , controller & data processor , transmit receiver unit (tru) , com-slave assy , power converter-1 assy , power converter-2 , customised rf + vme assembled back plane , tx/rx 125w iff (bharani) , pcb assy-sp , pcb assy-processor and conduction cooled , pcb board assy (key board encoder 8x8) , pcb assy (baseboard-cpu 1484) , charger battery li-ion 26v 90ah (drg no) , target data receiver , communication interface unit (ciu) , line transfer unit(ltu) , com master card , commander s display unit-lllwr (bharani) , joystick assembly , power cable-w2 (ups to cu) , pedstal cable-w3 , tru bottom cable-w4 , rf cable-w7 (pedstral-cu) , tru top cable-w5 , rf cable-w8 (ped-tru&ped-iff) , rf cable-w9 (tru to horn) , cable assy-w10 (slc ant-tru) , cable assy w11 , w12 (iff switch-iff ant) , battery cable-w6 (battery-cu) , ups , battery cable-w1 (battery to ups) , na , inverter dc-ac(12v i/p 620v o/p) , hdd embedded windows xp loaded , module assy cpu-1484-69 , trackball (laser 25mm protocol o/p) , multi coax cable (1a-1) cu-int , smps , 27 volts/30 amps

Central Government/Public Sector

CTN :40754061

14 Aug, 2025 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : custom bid for services - computing module do - 254 compliant fpga d; ar/vr application development including hardware installation-i. certifying and external review authority: rcma/ cemilac and ada ivnv group. ii. design assurance level: dal-a as per ada order iii. fpga development overview: the computing module is the core of the store control system. it consists of a main computing unit (ti s tms570 mcu) for control & fpga for glue logic and peripheral interfaces along with dio and combinational logic. description of computing module (cm) - this computing module is a microcontroller based design. it includes microchip proasic3l series fpga to provide required peripherals. the microcontroller and fpga are connected on 16 bit parallel data bus from the microcontroller. there are total three peripherals connected on the parallel bus. an external flash memory, sram memory and a fpga, all connected devices are memory mapped with respective memory ranges. the fpga provides mil1553 interface with external mil1553 controller, uart, discrete input and output, elapsed counter etc. interfaces to the main microcontroller. the fpga also includes the prognostic logic which records temperature and vibration sensor data over i2c and spi interfaces and writes this data to fram memory connected on spi interface with fpga..

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

State Government

CTN :41333627

29 Aug, 2025 1.47 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing advanced apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - ultra sonic pulse velocity testing instrument :-supplying ultra sonic pulse velocity testing instrument for non destructive testing (ndt) of hardened concrete to asses the quality of concrete in term of dense, homogeneity and uniformity. instrument shall also be capable of crack & void detection and elastic properties measurment of concrete. the apparatus for ultra sonic pulse velocity measurment shall consist electrical pulse generator, transducers in one pair, standard calibrator bar, amplifier, electronic timing device. performance requirement of apparatus shall be as under :-- transit time accuracy within - 1 % range- range of time - 20 s to 10 ms- referance specimen - two no. usually steel bars having pulse transit time 25 s to 100 ms with accuracy 0.2 s- transducer - one pair - piezo electric and magneto strictime type frequencies in between 10khz to 200 khz, contact type ultra sonic concrete tester range - upto 5 mtr. & 5 mtr. and aboveaccuracy - 100 nano second- power - 7.2 v (dc), rechargable bettary - oper. temperature - 0 to 500 c - resolution - 0.1 s- display - 128x64 graphic lcd - display response time - instantaneousstandard accessories :-1- 1 set of 7.2 v nicd cell2- probe cable 2 no. (4m each)3- transduces - 2 no. (50 mm dia, 60 khz)4- calibration block alongwith verification block with nabl traceability certificate5- cover /bag instrument shall meet requirements of is: 516(part-5/sec.-i) 2018, en 12504-1 & astm c 597. standards.the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., rotational viscometer : supplying & installation of rotational viscometer of spring torque model for higher viscosities that specially designed for conducting high-temperature testing of ashphalt binders in compliance with astmd 4402/d4402m-23 and is: 73-2013,is :15462-2019 & is:17079-2019 .standards . it should be capable to determine viscosities of liquids. like oil, ashphalt & solvent etc.key feature of apparatus shall be as under :-precise temperatures control unit to ensure precise temp control and maintaining content & accurate testing temperatures.user friendly inter face to easy to use and display of accurate result.level indicators surface level indictors should be our both the temp control unit and the main unit to ensure equipment remain level.versatile spindle options capable of with standing the demanding condition of ashphalt testing., builtin micro printer for convenient result printing., automatic range calculation capable of automatic full scale range (fsr) calculation for 100 % viscosity with specific spindle and speed combination., window based software shall include window based software for creating viscometer vs temperatures course with test data continently stored ms excel., high-visibility lcb the lcb display features a white backlight for enhanced visibility and clarity.technical specifications of apparatus shall be as under :-rotation speed 0.1- 250 rpm, viscosity measurement range 100 cp to 64m cp, torque range high up to 57496 dyne.cm ( 5.749 mn.m) ,spindles set of large spindles as required, torque range 10%- 100% full -scale torque, measurement error: 1% (f s), temperature controlling range: up to 200 c, temperature controlling accuracy: 0.1 c, cubage of sample cylinder: 20ml, serial interface: rs232, working environment: ambient temperature: 15 c to 35 c, 85%, operating voltage: ac (220v 10%)v, 50hz, single phase, total power consumption: 200w, components included of apparatus shall be as under :- -head of viscometer -auxiliary controlling case (containing a temperature controller and a micro-printer), - thermo-electric heater, -spindles made of aisi 316l as per requirment with adaptor, -pen drive for pc software setupstand, external power supply connection cable, ins

Central Government/Public Sector

CTN :40793643

12 Aug, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of uhf transceiver terminal , uhf radio , uhf power amplifier-los with fsu , uhf power amplifier-satcom , uhf antenna-los , uhf antenna-satcom , uhf interface unit , remote control unit , mss transreceiver terminal m-ii , ac-dc power supply unit , remote interface unit , ethernet switch , headset , handset , control card , led green , led red , display control card , fsu control card , presure vent , 0/p cable , two pole mcb , control card , display card , digital voice card , data control card , fuse holder , fuse (3a) , mother board , display control card , slide (set) , shock mounts for rack , dual directional coupler , driver amplifier , dual directional coupler 1 , dual directional coupler 2 , rf cable assembly set , dc-dc converter , lan adapter mrj-5780-01 , pcb sru 3003 with blower and battery , lemo connector , pre controller module , gps receiver card , audio switch card , mss tx/rx terminal m-ii

Central Government/Public Sector

CTN :41286422

15 Aug, 2025 NA

Delhi - Delhi

Tender For supply of 4 nos of digital transmission consoles at the akashvani delhi

CTN :40731821

13 Aug, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - memory card-e, cdu (control display unit), equipped crt, video switching unit, mdpu- digibus interface module, mdpu- data processing module, mdpu- 1553b interface module, mdpu- configuration board, multirole digital receiver unit, air data computer, ewmps desktop, fsdu (function selection and display unit), pch power supply

Consoles Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector