Latest contact lever Tenders | Government contact lever Tenders

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

Central Government/Public Sector

CTN :45037876

21 May, 2026 NA

Bhusawal - Maharashtra

Tender For supply of contact lever complete to m/s adtranz pt no s-2306/s-2506 rdso drg. no.skel 4659 alt.1.sheet no.1 & 2 spare for tap changer type no 32. [ warranty period: 30 months afterthe date of delivery ]

Central Government/Public Sector

CTN :45025563

18 May, 2026 NA

Dahod - Gujarat

Tender For supply of apd for pin bell crank lever & push rod as per escorts drg. no 4eb9573 or similar for escorts make bmbs as per rdsos spec no. wd-23-bmbs-2008 (rev. 1) amendment no.1 of sept 2016. uvam item ref. : 3100220--bogie mounted brake system for freight stock fitted with casnub type bogie (as per spec no. wd-23-bmbs-2008). ]

Central Government/Public Sector

CTN :44979481

07 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of flexible shunt & mobile contact lever for mc as per clw drg.no.2 twd .112.030 alt.-7 [ warranty period: 30 months after the date of delivery ]

CTN :44968544

27 Apr, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of flexible shunt & mobile contact lever assly.for motor contactor as per clw drg. no. 2twd.112.030, alt.-7. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44958011

28 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For supply of contact lever complete for cgr of tap changer n32 as per rdso drg.no.skel.4659 alt-1 to m/s.repl pt.no.s2506 drg.no.hagt.340079.r1 (or) to aal pt no.g2506 drg no.9989000 313801 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44947701

04 May, 2026 NA

Erode - Tamil Nadu

Tender For supply of mobile contact lever assembly complete for motor contactor 1500 amps (with silver bit tip insert required) to clw drg. no. 2twd/112/004 alt-6, for tip drg. no. 3twd-112-116 a alt-4. [ warranty period: 30 months after the date of delivery ]

Contact Lever Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector