Latest contact ring Tenders | Government contact ring Tenders

Central Government/Public Sector

CTN :41017555

11 Aug, 2025 NA

Multi City - Multi State

Tender For supply of set of locking plates for pivot housing as per clw drawing no 1209-01.413-025 alt-1 consistin g of (1) locking plate for housing ring qty: 01 nos/set. (2) locking plate of pivot ring qty: 01 nos/set. [ warr anty period: 30 months after the date of delivery ]

CTN :41004584

25 Jul, 2025 NA

Chamoli - Uttarakhand

Tender For supply of drone training infra d d - x pivot gate , criss cross matrix , window glide , hover box , grid trap arch , rhombus centre , falcon ring , field gate alpha , hexa breach , bastion blocker , stealth tunnel , camo crawl house , sentinel arches , blade flags , delta den , bravo camp tunnel , camo cubes , sniper hole , war bridge tunnel , x tube crossover , raptor climb deck , bravo tower , boundary wall around perimeter , shipping and logisitic

CTN :40974712

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spring washer (p-22) , locking washer (plate no-7) , fibre washer , fibre washer , nut for adjusting rod (p-14) , sealinf ring for 14 & 19 , slotted nut (p-26) , rivet flat hd (p-07) , rivets , rivet flat head (p-14) , grease nipple (plate no-7) , lock nut (plate no-7) , cotter pin , pin for leve , link lever (ctlg fig-03) , clamp , copper washer , set screw (fig-i) , gasket exhaust manifold , key for coupling (plate no-4) , grease nipple (p-09) , locking wire (fig-i) , stud , union (p-04) , union , nut (p-15) , rock stud (plate no-7) , stud (fig-i) , stud (fig-i) , pin for die (plate no-7) , clutch spring , oil lubricator (plate no-4) , clutch opening die (plate no-7) , step bolt (p-16) , joint , water inlet manifold to cylinder head , joint end , drain plug (plate no-14) , joint , venturi to induction mainfold(ms-202) , drain plug , bonnet clips (plate no-2) , thrust washer (plate no-3) , stud cyl block , thrust washer (p-14) , cap , inlet and exhaust valve(ms-192) , joint exhaust manifold outlet flange(ms-196) , gland , fuel tap , die , heater switch (p-20) , hose connection , fixing pin (plate no-4) , spring for adjusting rod(p-14) , pad oil filter element(ms-175) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , gland for cock , fuel filter (p-21) , adjusting rod (p-14) , joint for hanger , pin for die & split pin , dog , spring inlet and exhaust valve outer(ms-190) , clamping stud with nut(fig-i) , locking nut (fig-i) , filter cap (plate no-14) , oil pressure gauge(p-20) , joint , outer clamping plate (plate no-10) , pin for pivot bracket(p-17) , driving belt , plate driving(facing in 3 segment) , belt water pump , pin for coupling (plate no-4) , oil pressure meter (plate no-14) , rubber coupling (plate no-4) , fulcrum pin (p-15) , bush for clutch plate (fig-i) , distance end piece (fig-i) , coupling block (plate no-4) , shim set (fig-i) , bearing (fig-i) , top bush (plate no-3) , ball brg , worm case cover (plate no-4) , sealed ball bearing , selector lever(p-15) , split universal coupling (plate no-4) , universal coupling (plate no-4) , flexible hose , bearing (plate no-4) , bush for clutch operator (fig-i) , collar assy (ctlg fig-03) , backrest(plate no-18) , bottom cushion (plate no-18) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , clutch lining set (fig-i) , reverse clutch plate (plate no-10) , forward clutch plate (plate no-10) , 2nd inter shaft (fig-h) , forward clutch plate assy , brake ferodo (p-14) , housing cover r.h for 3rd inner shaft , spindle for steering (plate no-4) , ferode lining , clutch lining , bevel wheel , bearing (fig-i) , bearing cover rh for 3rd inner shaft , coupling shaft , bearing (fig-i) , main bearing housing (fig-i) , driving disct , pinion 1st and 3rd speed (fig-h) , pinion 3rd & 4th speed(30 teeth(fig-h) , pivot (plate no-3) , brake strap assy , rear foot plate

Central Government/Public Sector

CTN :40990540

21 Jul, 2025 NA

Multi City - Multi State

Tender For supply of pivot ring for wag-9hc

Central Government And Public Sector

CTN :40957351

08 Jul, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of " center pivot ring " drawing no : contr-9404-s/5, item no-4, alt-10. material spec : as per drawing with latest revision and amendments and contr-lccf 20(c)-96 , rev-2 with (amendment n o. 2 of sep.2016). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40960263

07 Jul, 2025 NA

Ranipet - Tamil Nadu

Tender For supply of set of locking plates for pivot ring and housing ring of 3 ph. locos consisting of 02 items as f ollows. 1) locking plate for pivot ring ref.no.1 of clw drawing no.1209.01.413.025, alt. 2 or latest if any. qty/set. 01 no. 2) locking plate for housing ring ref.no.2 of clw drawing no.1209.01.413.025, alt. 2 or lat est if any. qty/set. = 01 no. [ warranty period: 30 months after the date of delivery ]

CTN :40960091

01 Aug, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of locking plate for pivot ring clw cat no.l/9/0030 c&d no.t212/022 (each set c onsists 02 items as per annexure) [ warranty period: 30 months after the date of delivery ]

CTN :40949790

11 Jul, 2025 2.43 Lacs

Delhi - Delhi

Tender For providing childrens playground equipment (jhula) in west campus near kendriya bhandar park of iit delhi. - childrens playground equipment, supply and installation of childrens playground equipment supply, delivery, and installation of a factory-fabricated suitable for children, constructed from high-quality powder-coated galvanized steel and weather-resistant hdpe or plastic seats and handles. the equipment shall consist with anti-slip grips and ergonomic support, mounted on a central pivot frame with heavy-duty bearings to ensure smooth and safe operation. all materials used shall be uv-stabilized, rust-resistant, and conform to playground safety standards. the equipment shall be securely anchored into a concrete foundation as per the manufacturer s specifications, complete in all respects including excavation, foundation, backfilling, and finishing to the required level.(the equipment must accompanied with test reports for quality, safety, durblity, and proper functioning of equipment), 1) providing and fixing deluxe 2 see saw as per specifications, 1.1) deluxe 2 see saw:- product area: minimum 2500 mm x 350 mm. safe play area: minimum 4500 mm x 1500 mm. see saw lever is made up of minimum 100 nb gi b- class pipes. lever length willbe minimum 2500 mm long. lever ends are coveredwith gi pipe end cap. two nos. of seats are made up of lldpe plastic with inbuilt handle. stand is made up of minimum 80 nb gi b-class pipes. two no of pedestal bearing are given for smooth and noiseless movement of see saw lever. bearing is covered with nylon cover, 2) providing and fixing of deluxe slide as per specifications, 2.1) deluxe slide ae301 structure made of 35mm x 4mm angle iron frame slide: g.i. sheet slide length: 6ft, 3) providing and fixing of kids merry go round as per specifications, 3.1) frp platform merry go round:- product area: minimum 1500 mm diameter. safe play area: minimum 3000 mm diameter. the platform of merry go round made up offibre reinforced plastic. the ring on which the frp platform is based. barcode on machine to show the proper use of machine., 4) providing and fixing of horse rider as per specifications, 4.1) horse rider product area: minimum 900 x 350 mm. safe area: minimum 2700 mm x 950 mm. spring assembly is made up of square plates & compression spring. compression spring is made up of minimum 18 dia wire, spring dia is minimum 200 mm and height is min 300 mm (+10%). stand is made up of minimum 40 nb b class g.i isi mark pipes of reputed make (jindal/bhushan/tata) plate is welded on it to fix plastic bike on it firmly. all welded joints are properly groundedand coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat done by first coat of superior brand primer 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character is made up of lldpe plastic with rotational moulding process which is nonageing, non-toxic and have u.v. stabilizers for colour resistance. length of bike is minimum 850 mm long and weight is minimum 7 kgs. it has inbuilt handle and foot rest., 5) providing and fixing of triple swing side as per specifications, 5.1) triple swing, side pipe - 35 mm upper pipe - 50 mm seat - rubber sheet chain - 3 mm.

CTN :40673855

08 Jul, 2025 NA

Sagar - Madhya Pradesh

Tender For corrigendum : supply of repair and maintenance of spare parts of vehs e e - terminal negetive x31xcluc 9030996 , terminal positive x31xcluc 90301014 , pivot pin alloy steel 61161 escou 10192053 , pivot pin alloy steel 61161 escou 10172017 , tacho cable 61161 escou 73003503 , pivot pin alloy steel 61161 escou 10192056 , pivot pin alloy steel 61161 escou 91102700 , pivot pin alloy steel 61161 escou 91100500 , side cutter 61161 escou 53500103 , side cutter 61161 escou 53700103 , side cutter 61161 escou 53700104 , side cutter 61161 escou 53500104 , presure hose 61161 escou 13090028 , gasket 61161 escou 81300251 , lh qtr pane rubber 61161 escou 92605006 , rubber washer 61161 escou 82300223 , lh lock assy 61161 escou 12113400 , rh lock assy 61161 escou 12113500 , grommet 61161 escou 55000161 , grommet 61161 escou 55000162 , sealing rubber 61161 escou 90609800 , locking handle lh 61161 escou 12223510 , spring 61161 escou 81400168 , o ring 61161 escou 82800096 , o ring top 61161 escou 24070227 , seal 61161 escou 82800137 , seal 61161 escou 82800138 , pivot pin alloy steel 61161 escou 81150116 , bush spring steel 61161 escou 12080031 , decal panel warning 61161 escou 13005128 , working light 61161 escou 73004030 , break light switch 61161 escou 70117300 , fuse box 61161 escou 73001001 , flasher unit 61161 escou 73070300

Central Government/Public Sector

CTN :40836460

07 Jul, 2025 NA

Ranipet - Tamil Nadu

Tender For corrigendum : supply of set of locking plates for pivot ring and housing ring of 3 ph. locos consisting of 02 items as f ollows. 1) locking plate for pivot ring ref.no.1 of clw drawing no.1209.01.413.025, alt. 2 or latest if any. qty/set. 01 no. 2) locking plate for housing ring ref.no.2 of clw drawing no.1209.01.413.025, alt. 2 or lat est if any. qty/set. = 01 no. [ warranty period: 30 months after the date of delivery ]

Contact Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector