Latest control equipment spares Tenders | Government control equipment spares Tenders

State Government

CTN :43022705

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri and d block mcd flat nand nagari. (re-invite) - supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri & d block mcd flat nand nagari by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

State Government

CTN :43022728

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1. - supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1 by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :-dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

CTN :43021034

15 Dec, 2025 5.87 Lacs

Karnal - Haryana

Tender For repair/ replacement of submersible/ horizontal pumping sets for tubewell/ booster consisting mainly of motor, pump electrical control panel, starter, cable and all accessories sluice valve, non return valves specials, lowering pipe etc. including all

CTN :43021040

15 Dec, 2025 3.94 Lacs

Karnal - Haryana

Tender For repair/ replacement of submersible/ horizontal pumping sets for tubewell/ booster consisting mainly of motor, pump electrical control panel, starter, cable and all accessories sluice valve, non return valves specials, lowering pipe etc. including all

corporations/Associations/Others

CTN :42990877

15 Dec, 2025 NA

Madurai - Tamil Nadu

Tender For auction sale of aluminium alloy scrap,aluminium scrap,copper scrap,scrap 420 kv bhel bushing without lead,scrap 400 kv current transformer, m/s wsi make,scrap-acsr conductor,scrap ballast/choke,scrap common electrical items,scrap control cable,mwh meter -landis & gyrfl246hr3.2f14-0.5/2,gasket 4n1151-dg set-kirloskar,scrap porcelain disc insulator,scrap aluminum power cable,scrap split ac with indoor & outdoor units,scrap 11kv voltage transformers,transformer empty oil drum (209l),ferrous iron/ms metallic scrap,miscellaneous scrap(bellows-acb-s&s 6no, pressure relief etc ),scrap 160 kn porcelain long rod insulators.,gi scrap earth wire & counter weight of 420kv earth switches,scrap_433v lt air circuit breaker,bpl plcc panel along with all cards,abb etl 21 plcc panel along with all cards,scrap transformer oil with drum,hpsv lamp 70/80w, screw type

Central Government/Public Sector

CTN :42871247

04 Dec, 2025 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : electrical control panel (m.box) for dry type transformer rc

State Government

CTN :42859019

19 Dec, 2025 9.81 Lacs

East Nimar - Madhya Pradesh

Tender For aoh of electrical equipment and auxiliaries of sstpp unit-1 of 2x600mw, sstpp, mppgcl, khandwa. - generator, misc works in generator overhauling, h2 purging after unit shutdown & h2 refilling before of unit light up., transformers, general overhauling of ht transformers, generating transformer(work description as detailed intender schedule), station transformer (work description as detailed intender schedule), inter-connecting transformer (work description as detailed intender schedule), unit auxiliary transformer (work description as detailed intender schedule), neutral grounding panel ( gen., gt, st, uats) {(work description as detailed intender schedule)}, general overhauling of lt transformers, lt dry type transformers (work description as detailed intender schedule), lt oil filled transformers (work description as detailed intender schedule), switchyard, breaker, isolators ,earth switch, bay equipments (cleaning & terminal tightness), bus ducts (work description as detailed intender schedule), 21/ 15.75 kv gen bus duct, 11 kv uat/st bus duct, 6.6 kv uat/st bus duct, lt transformer bus duct, esp, ltmsb & acp buses , ec panels & heater work (as per scope of work), ltmsb & acp breakers (as per scope of work), ltmsb & acp modules(as per scope of work)eerm=80 , cerm=80, gdrm=8, fields= 80, vfd supply=4, lighting supply & etc. = 25(approx), ht switchgear (11 kv/ 6.6 kv), bus cleaning , tightness & complete inspection of all buses., breaker cleaning, tightness & operation checking, bop switchgears panel / local control panels / wall mounted panels and 415v lt swbd/ mcc/acdb/dcdb switchgear panel, bus cleaning , tightness & complete inspection of all buses. breaker cleaning, tightness & operation checking, power house lighting & power supply, cleaning , tightness & complete inspection of all lightning transformers & ldb, providing power supply as per site requirement & for other maintenance work of bmd,tmd etc., ht motors, servicing of ht motors, ht motor cooler (general inspection & cleaning), lt motors servicing, motors above 40 kw, motor 40 kw to 11 kw, motors 10 kw to 5.5 kw, motors 5 kw to 1.1 kw, motors 1 kw and below, esp lt motors 1 kw and below, lt motor overhauling, motors above 40 kw(machining), motor 40 kw to 11 kw, motors 10 kw to 5.5 kw, motors 5 kw to 1.1 kw, motors 1 kw and below, servicing of dc bus, cleaning/servicing of 220 v dcdb buses & modules, servicing of soot blowers, servicing of soot blower motor 1 kw & below, servicing of soot blower panel/modules

State Government

CTN :42718791

04 Dec, 2025 70.00 Lacs

Sheopur - Madhya Pradesh

Tender For rate contract award for supply of local purchase items for operation and maintenance of various equipment and various safety material for onm divisions and stm stc division situated under general manager (o n m) mpmkvvcl circle sheopur. - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing

CTN :42955746

04 Dec, 2025 7.43 Lacs

Ambala - Haryana

Tender For repair of submersible/horizontal pumping sets for tubewells only consisting mainly of motor pump, electrical control panel, starter cable and all accessories sluice valve, non return valve specials etc. including all appurtenances at existing 58 nos.

CTN :42954291

27 Dec, 2025 39

Multi City - Karnataka

Tender For procurement of electrician lab setup and supply of tools, equipment and machineries. - industrial type power wiring for electrical lab, combination set of 1 panel board electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines single phase and three phase. should be fitted with friction brake arrangement, green chalk board 8 x 4 with fixing clamps, wiring board 3 meter x 1 meter with 0.5 meter projection on the top made up of wood plank and angles, ev charger for home for 2 wheeler 1 phase input, ev charger for 4 wheeler 3 phase input, smart energy meter 3 phase digital, smart energy meter 1 phase digital, stepper motor 1 ph 240 v with digital controller, primary current injection set 1 phase 220v 50 hz output current 200 a min with timer, ceiling fan coil winding machine 1 phase 250v 50 hz with speed control, motor coil winding machine manual type with step arbor, partition work double skin for electrical lab safety h 4 feet, l 23 feet, supply and installation of electrical lab modular work bench / table for mounting electrical motors and generators and control panel box for electrician lab electrical ac and dc machines , modular work bench/ table for electrical lab, threephase ac main control and distribution panel board 36 l x 24 h x10 d, combination set of 1 panel board thyristor / igbt controlled a.c. motor drive vvvf control 3 phase, 2 hp and thyristor /igbt controlled d.c. motor drive 1 hp , combination set of 1 panel board single phase transformer core type air cooled 1 kva 240/415 v 50 hz and three phase transformer shell type oil cooled 3 kva 415/240 v 50 hz, combination set of 1 panel board d.c. compound generator 2.5 kw 220v coupled with 3phase squirrel cage induction motor 5hp 440v, combination set of 1 panel board d.c. shunt generator 2.5 kw 220v coupled with 3 phase squirrel cage induction motor 5hp 440v, combination set of 1 panel board 3-phase ac squirrel cage motor 5 hp 3-phase 415 v 50 hz and single phase series type motor 1 hp 240 v 50 hz, combination set of 1 panel board motor-generator set ac to dc squirrel cage induction motor 7.5 hp, 415v coupled with dc shunt generator 5 kw 440v , combination set of 1 panel board motor-generator set dc to ac shunt motor 5 hp 440v coupled with ac generator 3 phase 4 wire 3.5 kva 400/230 volts foot mounted, combination set of 1 panel board dc shunt motor 2.5 kw 220 v and dc compound motor 2.5 kw 220 v, combination set of 1 panel board dc series motor 2.5 kw 220 volts and single phase universal motor 240 v 50 hz 1 hp

Control Equipment Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government