Latest control lever Tenders | Government control lever Tenders

CTN :45065815

11 May, 2026 4.21 Lacs

Baran - Rajasthan

Tender For requirement of spares and one unit of power take of units pto make m/s syall engineering for both fire tenders. - heavy duty full torque pto units , suitable for fitment in fire tender on al, 1616 chassis having gear ratio of 1:1.27 x input, at ctpp, chhabra. , complete removal of existing pto unit, and complete fitting and testing of 01no. performance of new installed pto at ctрр, chhabra. , spare for heavy duty full torque pto units fitment in fire tender on al, 1616 chassis havin 1:1.27 x input, complete removal of existing , transmission shaft top , counter shaft , main shaft bottom (out put) , sliding gear , intermediate gear , main drive gear (in-put) , sliding dog , selector spindle top , selector spindle bottom , selector fork top , selector fork bottom , selector spring , selector ball 10mm , end cap , oil seal housing bottom (output) , oil seal housing top (output) , front bearing up support (output) , distance piece-lon (counter shaft) , oil level pipe (dip) , oil dip stick , retaining washer (10x6x56) , retaining washer (10x6x45) , selector top arm , selector arm bottom , rajkaj ref , control lever , cooling coil , sleeves , union nuts of brass , input flange coupling , output flange top/coupling , circlip plain inner (85x3) , circlip inner (100x3) , circlip inner (90x3) , circlip inner (62x1.72) , circlip inner (47x1.75) , circlip outer (45x1.75) , circlip inner (45x1.75) , dowel pin (8x30)

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086306

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/28/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260754 bobsnm1 (nlb) 2) nr 75039187923 bobsnm1 (nlb) 3) sc 75099160133 bobsnm1 (nlb) 4) cr 75019208020 bobsnm1 (nlb) 5) cr 75019260097 bobsnm1 (nlb) 6) ne 75049260012 bobsnm1 (nlb) 7) nr 75039160537 bobsnm1 (nlb) 8) se 75079215273 bobsnm1 (nlb) 9) nr 75039187893 bobsnm1 (nlb) 10) se 75079260532 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086307

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/27/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079160320 bobsnm1 (nlb) 2) se 75079260266 bobsnm1 (nlb) 3) se 75079260334 bobsnm1 (nlb) 4) se 75079216317 bobsnm1 (nlb) 5) se 75079218250 bobsnm1 (nlb) 6) nr 75039160780 bobsnm1 (nlb) 7) se 75079260471 bobsnm1 (nlb) 8) er 75029260179 bobsnm1 (nlb) 9) nr 75039187725 bobsnm1 (nlb) 10)se 75079260389 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45044595

14 May, 2026 NA

Pune - Maharashtra

Tender For supply of mt spare d d - pipe union pressure regulator union , 10333358 lv7 zil 130 3430139 intermediate cover sealing ring , 10333359 lv7 zil 130 3430012 steering booster control valve set assy , 10333608 lv7 zil 130 6104011 left hand window raiser assy , 10333642 lv7 zil 130 5206054 sealing strip lock , 10333664 lv7 zil 130 6105029 left hand latch assy , 10333667 lv7 zil 130 6105013a left hand lock assy , 10334008 lv7 zil 131 1804040 lever transfer case control lever , 10334083 lv7 zil 131 1804173 shackle , 10334086 lv7 zil 131 1804316 hose assy from tfr case control valve , 10334087 lv7 zil 131 1804319 tfr case control valve connecting hose , 10334825 lv7 zil 306647 p main shaft front roller bearing , 10335468 lv7 zil 131 1800010 transfer case parking brake assy , 10335728 lv7 zil 130 6105081 a left hand door lock control linkage assy , 10336719 lv7 zil 131 4501046 gasket , 10336932 lv7 zil 255128 p tubular round head , 10337265 lv7 zil 130 5001364 b cab middle support lower pad assy , 10337269 lv7 zil 262514 p plug , 10338104 lv7 zil 164 6104055 window regulator brk mech spring head , 10338339 lv7 zil 130 8401305 radiator grill sealing strip seal , 10338438 lv7 zil 130 8402530 rh hood mounting linkage assy , 10338458 lv7 zil 130 8402531 lh hood mounting linkage assy , 10340615 lv7 zil 421174 p brake valve elbow 3 8 , 10341084 lv7 zil 130 1701086 bush , 10341103 lv7 zil 130 1602126 fork sealing ring bushing assy flange , 10341108 lv7 zil 131 3801010 instrument pannel for lot 1 , 10341223 lv7 zil 130 1701127 gear second speed secondery shaft , 10341389 lv7 zil 131 3733010 electromagnetic assy rs 326 , 10341490 lv7 zil 130 1701059 bushing , 10341619 lv7 zil 130 1701021 hatch cover gasket , 10343551 lv7 zil 131 5130037 power take off lever hatch sealing , 10343619 lv7 zil 157u 3802046 bushing , 10344427 lv7 zil 307291 p oil seal outer cup , 10344542 lv7 zil 307743 p locking ring rear bearing lock ring , 10345173 lv7 zil 300275 p8 through union , 10346127 lv7 zil 131 3713230 b instrument pannel illumination lamp , 10346145 lv7 zil 130t 3801010 b instrument pannel type kp 204 assy , 10346197 lv7 zil 130v 6105030 rh striker assy , 10346224 lv7 zil 200376 p8 shackle to floor attachment bolt , 10347301 lv7 zil 305000 p plug , 10367772 lv7 zil 122 2104136 yoke threaded high and low ranges contr , 10543367 lv7 zil 130 5206010 wind shield right hand glass , 10544428 lv7 zil 258257 p2 1 lock wire wire catter pin , 10559703 lv7 zil 131 4202010b single speed pto assy no 01 , 10565024 lv7 zil 131 1702220 b2 gear shift lever assy , 10565027 lv7 zil 131 4202375 chamber diaphragm , 10321065 lv7 zil 131 2919011 a rear suspensing torque rod with pin , 10339426 lv7 zil 130 6804010 mechanism rh assy , 10336979 lv7 zil 130 3003056 steering tie rod right hand end assy , 10339445 lv7 zil 130 6804011 mechanism lh assy lv7/zil fg73711300g moulding ring external assy, lv7/zil fg122-3711300-b head lamp mounting, lv7/zil pd20-3803000-d(zil) turn indicator pilot lamp type pd20d, lv7/zil 301375-p8 bolt, lv7/zil 130-6103680 vent window shut sealing strip, lv7/zil 130-6103645 vent window glass gasket 2.0mm thick, lv7/zil 130- 6103254 drop window sealing strip assy, lv7/zil 131- 3105819-b right hand hoist nut, lv7/zil 131-3105841 //bid details 2 / 63

CTN :44713490

05 May, 2026 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of main engine spares d d - speed transmitter_0001539620 , multi led t.5k24 red , multi led 5.5k blue , multi led t5.5 k24 yellow , lamp 28v/3w ( matt white ) , incadescent lamp minimum 10 pcs , incandescent lamp , speed sensor , pressure monitor 2.2 bar , pressure sensor 15 bar , pressure sensor 10bar , pressure sensor , tachometer , pressure sensor , switch , pressure sensor , indicator 30-0-30 sw-ws 96x48 , instrument , plug-in board , plug in board cib 3-10 , module mcs-5/pim3 , modular system , plug-in board mob 2-01 , plug-in board , plug-in board , plug-in board , plug-in board , plug in board aibi-02 , microswitch , control lever ros 2-03/a , level monitor , level monitor , pressure sensor , diff-press monitor , computer mpc 2-02 prog a.744832 , pressure sensor , wiring harness for on-engine sensor , wiring harness for on-engine sensor , switch , piston , injector

Central Government/Public Sector

CTN :45011291

07 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of fabrication - exp.jt.spacer st.1 (hy-101.35) - as per drg. 46116200825/02 with matl. specn. is 2062 gr b , control lever (var-02) as per drg. 46136200769/01 with matl as per specn. aa10119/15 , bull ring retainer hy-013.03 as per drg. 46016000040/02 with material as per specn. hy10199/03 , cover packing gland (hy-167.01.12) -as per drg. 36148000349/02 with matl as per specn. aa10108/11 , jr.cap screw lock plate (hy-220.1.09) as per drg. 46036000130/02 with matl. as per specn. aa10114/07 , spacer lip seal (hy-101.17) - as per drg. 36016200211/02 with matl as per specn. aa10119/15 , spring extn.cap (hy-133.a.04) -- fully m/cd item as per drg. 36136200561/01 with matl. as per drg. , thrust plate (f.e) (hy-220.1.50) -- fully m/cd item as per drg.46106290213/00 with matl. as per specn. aa10119/15 , air seal hsg. assly (hy-101.03) as per drg. 16116200404/08 with matl. as per specn. aa10119/15 , upper bearing housing cover (hy-132.a) - fully m/cd item as per drg. 16016200060/09 with matl as per specn. aa10119/15 , mill bottom cover assly. (hy-101.01) -- fabricated , assembled and fully m/cd item as per drg.16116200409/06 with matl. as per specn. aa10119/15 , link rod assly as per drg. 36136290148/01 with material as per drawing. , spring stud lock nut keeper (hy-133.b.13)- as per drg. 36136202770/00 with matl as per specn. aa10208/07 , jr. stop bolt nut (hy-014.03) - fully m/cd item as per drg. 46036000121/01 with matl. as per specn. aa10208/07 , jr.brg.spacer (hy-200.00) - fully m/cd item as per drg. 36036000113/05 with matl as per sepcn. sa106 gr. b , hi-tensile stud (hy-133.a.13) - fully m/cd item as per drg. 36136200482/01 with matl. hy10664/06 , pressure spring adjusting stud(hy-133.b.2.07) as per drg. 36136200658/03 (with maetric thread) with matl as per specn. hy-10664/06 , pr. spring clamp (hy-133.a.2.02) - fully m/cd item as per drg. 36136200484/02 with matl. is 2062 gr.b , jr. stop bolt (hy-014.02) - fully m/cd item as per drg. 36036000117/05 with matl. aa10208/07

Central Government/Public Sector

CTN :44968503

18 May, 2026 NA

Prayagraj - Uttar Pradesh

Tender For supply of drive control lever, plasser part no. elt-908-00001-i/l. make: plasser. [ warranty period: 12 months after the date of delivery ]

CTN :44959624

12 May, 2026 NA

Howrah - West Bengal

Tender For supply of spring of moving control lever for shunting contactor as per clw drg no. 4twd.111.046a alt.2 [ warranty period: 30 months after the date of delivery ]

Control Lever Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector