Latest control shaft spares Tenders | Government control shaft spares Tenders

State Government

CTN :41052738

04 Aug, 2025 67.93 Lacs

Gandhinagar - Gujarat

Tender For supply of spares for bottom ash handling system of ash plant - unit no.3, 4 & 5 at gandhinagar tps. - shoulder bolt with lock plate for assembling part no.8 (part no.9) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., cross brace (part no.11) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., resilient gate face p.no-2,for bottom ash hopper,drg 8743/2b/571, shoulder bolt with lock plate for assemblying part no.8 (part no.9) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, cross brace (part no.11) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, gate face 1 set consists of ss:316 gate face with m.s back up plate of 24x24 squire bottom feed gate of unit no. 5, cam segment p.no-1 for 33"x30 excen crusher, front wear plate/anvil plate of 33" x 30" clinker crusher / grinder assembly for unit-3and4 (1 set equals to 3 nos.)., back wear plate/plate combing (part no. 6) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 3 nos.)., side wear plate(part no. 8) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 2 nos. left hand and 2 nos. right hand wear plate)., shaft with shaft structure and shaft sleeve of 33" x 30" clinker crusher / grinder assembly for unit-3 and 4., 33"x30" single roll clinker crusher / grinder complete assembly without drive arrangement, fluid coupling, chain drive and driven sprocket as per dwg. no.8743-2b-582(rev-1) for unit-3and4, feedsump below clinker crusher for unit no.3 and 4, roll (cam segment) 1 setequals to 8 nos. cam segment of single roll crusher for unit no. 5, front wear plate/anvil plate (part no.3) 1 set consists of 3 nos b front wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, back wear plate/plate combing (part no.6) 1 set consists of 3 nos back wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, side wear plate (part no.8) 1 set consists of 2 nos. left hand and 2 nos right hand type of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, shaft with shaft structure with shaft sleeve(part no.2 and15)for clinker grinder., bearing support (part no.8) of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, single roll crusher complete assembly without drive arrangement,fluid coupling,chain,drive and driven sprocket of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, feed sump of bottom ash system of unit - 5 as per drawing no. 95p10 - t - 1b - 711, complete assembly of feed gate housing with feedgate, access door for unit no.3 and 4, bearing housing of dcips make 33" x 30" clinker crusher/grinder, locking plate for 600 dia. round access door for bottom ash hopper, nozzle with ceramic tip(part no. 2)tip size- 36 mm of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), aligning ring(part no. 10)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), half clamp(part no. 11)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 9" flange clamp half (part no. 18) of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 8" jet pulsion pump complete assembly without tail pipe for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), nozzle with ceramic tip size 34 mm of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, aligning ring (part no.10) of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, half clamp (part no.11) 1 setequals to 2 nos of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, 9" flange clamp half (part no

Central Government/Public Sector

CTN :40692767

19 Jul, 2025 NA

Mandal - Gujarat

Tender For corrigendum : supply of warman pump spares > - model: 1.5/1 bah, metal/ rubber /expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, gland ( 2 piece), lantern ring, volute frame seal, frame plate, volute liner, discharge joint ring, impeller o ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), frame plate liner insert, impeller, cover plate bolt& nut (1 set consists of 4 nos), cover plate, intake joint ring, gland clamp bolt (1 set consists of 2nos), gland bolt, nut & washer (1 set consists of 2nos), gland packing (1 set consists of 2 nos), neck ring, expeller, expeller ring, seal ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), end cover set screw (1 set consists of 8 nos), shim set, piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner, frame plate stud & nut, frame plate liner, cover plate bolt& nut, model: 3/2 cah, metal/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve, frame plate liner insert stud (1 set consists of 4 nos), seal ring, volute frame seal, impeller, discharge joint ring, volute liner, cover plate, intake joint ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), frame plate liner insert, frame plate, impeller o ring, grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, expeller, expeller ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner stud (1 set consists of 4 nos), cover plate liner (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), frame plate liner, model: 4/3 dah, rubber/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, frame plate liner stud (1 set consists of 4 nos), frame plate liner, frame plate, impeller (normal), cover plate liner, cover plate, cover plate liner stud (1 set consists of 4 nos), adjusting screw, nut & washer (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), impeller o ring, cover plate bolt& nut (1 set consists of 4 nos), shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, gland clamp bolt (1 set consists of 2 nos), frame plate liner insert, seal ring, impeller (trimmed), volute liner, volute frame seal, frame plate liner insert stud (1 set consists of 4 nos), discharge joint ring, keeper plate, intake joint ring, expeller, expeller ring, model: 6/4 eah, metal/ gland seal, bearing assembly, clamp washer, clamp bolt-1 nut, shaft sleeve o ring, shaft sleeve, frame plate liner insert stud -1 thin self lock nut, seal ring, volute liner seal, impeller, frame plate, discharge joint ring, volute liner, throat bush, cover plate, cotter, intake joint ring, adjusting screw -3 thin nuts -2 washers, base, frame plate liner insert, impeller o ring, cover plate bolt -2 nuts, packing, gland ( 2 piece), gland bol

corporations/Associations/Others

CTN :41060048

28 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of sg dmcw pumps shaft and shaft sleeve for unit i and ii

Central Government/Public Sector

CTN :40793770

17 Jul, 2025 67.44 Lacs

Dipka - Chhattisgarh

Tender For corrigendum : supply of procurement of spares for kirloskar make pumps c c - rotating assembly, moc bronze ftd, model no 6uph4 part no 6up4brftdsubrua2 or equivalent , rotating assembly, moc bronze ftd, model no dsm 150 by 46 part no subrua2 or equivalent , bearing housing unit, moc std, model no dsm 150 by 46 part no subbhudsm46 or equivalent , rotating assembly, moc bronze ftd, model no 8uph4m1 part no subrua2 or equivalent , bearing housing unit, moc std, model no 8uph4m1 part no subbhu8uph4 or equivalent , shaft sleeve de, moc bronze,model no 8uph4m1 part no 310 or equivalent , shaft sleeve nde, moc bronze,model no 8uph4m1 part no 311 or equivalent , shaft sleeve nut lh, moc bronze, model no 8uph4m1 part no 3341 or equivalent , shaft sleeve nut rh, moc bronze, model no 8uph4m1 part no 334 or equivalent , rotating assembly, moc bronze ftd, model no 12uph3 part no subrua2 or equivalent

Central Government/Public Sector

CTN :40793815

17 Jul, 2025 89.55 Lacs

Dipka - Chhattisgarh

Tender For corrigendum : supply of spares for wilo mather and platt pump model scpe 200 700 ds pumps c c - flushing piping moc-teflon hose pipe p.no.- 200700ds4290 or equivalent. , o ring int. brg. sleeve nitrile rubber p.no.-200700ds4251 or equivalent. , o ring shaft sleeve nitrile rubber p.no.-200700ds4250 or equivalent. , air vent cock moc-ss304 p.no.- 200700ds4230 or equivalent. , key for coupling moc- ss410 p.no.-200700ds3250 or equivalent. , key for impeller suction delivery moc-ss410 p.no.- 200700ds3200 or equivalent. , lock washer moc-m.s. p.no.-200700ds3020 or equivalent. , lock nut moc-m.s. p.no.- 200700ds3010 or equivalent. , thrust collar moc-m.s. p.no.-200700ds2884 or equivalent. , stuffing box bush delivery moc-ltb5 p.no.-200700ds2407 or equivalent. , stuffing box bush suctionmoc-ltb5 p.no.-200700ds2406 or equivalent. , gland split moc- cf8m p.no.-200700ds2310 or equivalent. , lantern ring moc-is28gr1 p.no.-200700ds2300 or equivalent. , water deflector moc-nitrile rbr p.no.-200700ds2070 or equivalent. , shaft rh moc-ss410 p.no.-200700ds1801 or equivalent. , impeller delivery moc-ca6nm p.no.- 200700ds1509 or equivalent. , impeller suction moc- ca6nm p.no.-200700ds1506 or equivalent. , screen straner moc-ss304 p.no.-200700ds5000 or equivalent. , acapetor moc-ss304 p.no.-200700ds4810 or equivalent. , four way piece moc-ss304 p.no.-200700ds4650 or equivalent. ) /bid number : gem/2025/b/6324178 * /dated: 20-06-2025 & & / bid document 1 / 23

Central Government And Public Sector

CTN :41056443

22 Jul, 2025 NA

Angul - Odisha

Tender For supply of complete asly of dm makeup pump# 9 , stuffing box bush for dmcw pump , pump shaft for dmcw pump , shaft sleeve for dmcw pump , dmcw bare pump assy without motor

CTN :41054285

23 Jul, 2025 NA

Sonitpur - Assam

Tender For supply of crank shaft 7 point 5 kva , crank shaft bush 7 point 5 kva , connecting rod 7 point 5 kva , crank shaft seal 7 point 5 kva , oil pump assy 7 point 5 kva , piston ring 7 point 5 kva , cr bearing 7 point 5 kva , piston ring genr set 30 kva , fuel pipe genr set 30 kva , mobil filter genr set 30 kva , tappet cover gasket genr set 30 kva , rubber oil seal genr set 30 kva , all gasket set genr set 30 kva , piston assy genr set 30 kva , sleeve genr set 30 kva , injector genr set 30 kva , air filter genr set 30 kva , fan belt genr set 30 kva , turbo charger assy repair genr set 30 kva , self starter assy 12 v genr set 30 kva

CTN :41054286

23 Jul, 2025 NA

Sonitpur - Assam

Tender For supply of fuel pump assy genr set 3 point 5 kva , piston assy genr set 3 point 5 kva , piston ring set genr set 3 point 5 kva , big end cell genr set 3 point 5 kva , governor plate genr set 3 point 5 kva , fuel filter genr set 3 point 5 kva , air filter genr set 3 point 5 kva , head gasket genr set 3 point 5 kva , piston assy with pin genr set 40 kva , piston ring set genr set 40 kva , liner sleeve genr set 40 kva , sleeve o ring genr set 40 kva , o ring set genr set 40 kva , housing bolt genr set 40 kva , main bearing genr set 40 kva , cr bearing genr set 40 kva , thrust washer genr set 40 kva , timing oil seal genr set 40 kva , real oil seal genr set 40 kva , engine gasket set genr set 40 kva , cyl head gasket genr set 40 kva , oil filter genr set 40 kva , diesel filter genr set 40 kva , stop solonoide genr set 40 kva , main bearing cap genr set 40 kva , v belt genr set 40 kva , oil cooler genr set 40 kva , oil pump assy genr set 40 kva , cam shaft brush genr set 40 kva , anabond genr set 40 kva , connecting rod genr set 40 kva , repair work genr set 40 kva , avr plate genr set 40 kva , rotary pump overhauling genr set 30 kva , oil filter genr set 30 kva , fuel filter genr set 30 kva , air filter genr set 30 kva , fan belt genr set 30 kva , oil filter genr set 15 kva , fuel filter genr set 15 kva , air filter genr set 15 kva , oil filter genr set 7 point 5 kva , fuel filter 7 point 5 kva , air filter 7 point 5 kva , fan belt 7 point 5 kva , fuel filter genr set 40 kva , air filter genr set 40 kva , fan belt genr set 40 kva

CTN :40770182

15 Jul, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of repair of gear lever , repair of fuel pressure pump , repair of injector assy with disc , block grinding and sleeve cutting facing , crank shaft grinding , cylinder head grinding and new valve fitting , labour charge of engine and gear box fitting , repair of air compressor and ac gas refilling , repair of self starter and electric connector

CTN :41053961

04 Aug, 2025 NA

Multi City - Multi State

Tender For supply of hydraulic pusher+puller arrangement for fans/bearing including special purpose fixture as pe r specification given below.(a) hydraulic arrangement: the system to comprise of the following(1)trolley wi th lifting arrangement.height:500mm to 830mm from ground(2) hollow jack :20 tone as per specification :- stroke:75mm,ram dia: 60mm, central hole:min 30mm,(3)hand pump hp-12 as per specification:volume dis charge/stroke:28cc,maximum working pressure:800kg/cm2,output port:1/4 inch bsp,(4)pressure gauge:gl ycerine filled all ss body,rated capacity:700kg/cm2 (5) jack hose 1.25 metre long capacity:700kg/cm2 (b) special purpose fixtures:(1) pusher stud to lack jack to mcp/mvrh/mvmt shaft size: m16*600mm long (2) e xtension sleeve 52 id & 300 mm long for mvrh/mcp/mvmt (3) adaptor plate with slots and 2 bolts m10*25 for fixing on fan of mvrh, (4) main body with studs m16*200 for mcp and mvrh fan (5) extension m20*2.5 f or mcp fan (6) c plate for mcp gear with m 16 threading (7) 4 jaw adaptor plate for arno rear bearing with 4 slots. all items to be made from high grade alloy steel & toughened. (c) 3 jaw bearing puller attachment, s pecification: min spread:80mm, max spread:300mm, reach:300mm suitable for bearing 50mm id to 100m m id:+/-i.e.6310 to 6320. all parts forged and hardened. [ warranty period: 30 months after the date of d elivery ]

Control Shaft Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector