Latest control system scrap Tenders | Government control system scrap Tenders

State Government

CTN :40049713

29 Apr, 2025 6.61 Lacs

Kolkata - West Bengal

Tender For supply, delivery, installation, testing, commissioning and laying of armoured al. conducter lt cable for carrying power between one no. transformer to lt panel including motor cables and allied works within the campus of bally cwbps, howrah.

State Government

CTN :40075060

07 May, 2025 51.99 Lacs

Multi City - Karnataka

Tender For 1)supply of two nos. of out door type 750kva, 11kv/400v, onan auxiliary transformer along with oil as per site requirement 2)supply of lt copper power cable 400v, 1.1kv grade pvc armored 3.5 core 2rx 400 sqmmm along with lv cable termination accessories,lugs etc 3)dismantling of existing 2 nos. of 750kva auxiliary transformers and old oil cooled cables at ltac panel and auxiliary transformer end and its accessories 4) laying of lt copper power cables and termination of cables along with supply of all accessories for laying of cables 5)erection, cabling, testing and commissioning of 2 nos. of 750kva,11kv/400v auxiliary transformers 6)buy back of released two nos. of 750kva auxiliary transformers along with oil

CTN :40065853

09 May, 2025 NA

Hooghly - West Bengal

Tender For supply of disconnecting and taking out defective under ground lt cable from trenches , supply laying testing and connecting xlpe sheathedpvc insulated screened pvc beddedgalvanised steel strip , all as per boq item no 200 here in before but of size 40 core 16 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 25 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 50 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 70 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 95 sqmm complete all as specified , laying only and connecting xlpe sheathedpvc insulated screened steel strip of wire armoured electric power cable , all as per boq item no 800 hereinbefore but of size 40 core 16 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 25 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 50 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 70 sqmm complete all as specified , excavating in trenches nexc 15 m wide and nexc 15 m depth for foundation etc or for shafts wells cesspits manhole pier hole , returning filling in including spreading levelling watering and well ramming in layers not exc 250mm in soft loose soil complete all as specified and as directed , removing excavated materials soils not exc 5000 mtr and depositing where directed at a level not exc 150 mtr above the starting point in soil complete all as specified and as directed , mandl sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches , mandl for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size35 4 x 2550 sqmm , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size35 x 70150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 40 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc , supply only the followings to be incorporated against item no 3000 and 3100 only 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc complete all as specified and as directed , single core stranded copper c

CTN :40025104

06 May, 2025 30.66 Lacs

Delhi - Delhi

Tender For supply of electrical infrastructure in room w 422 for ilms - sitc submain wiring , sitc circuit wiring , 6 a switch modular , 16 a switch modular , 6 a socket modular , 16 a socket modular , telephone socket , tv antenna socket , electronic fan regulator , gi box 2 module , gi box 3 module , gi box 6 module , tv cable , pvc conduit 20 mm , pvc conduit 25 mm , pvc conduit 32 mm , 1 run of utp cable , 2 run of utp cable , 3 run of utp cable , spn industrial type socket , tpn mcb db 200a , sp mcb 5 to 32a , tpn mcb 5 to 32a , gi race way , pvc dlp , 3 module support plate , xlpe power cable on wall , xlpe power cable on cable tray , end termination , sitc earthing with copper earth plate , sitc copper strip , xlpe 95 sqmm cable , sitc lt panel , modification of existing panel , ms cable trays

CTN :40046805

25 Apr, 2025 59.66 Lacs

Rohtak - Haryana

Tender For provision of mccb, load bank, earthing, hdpe pipe, foundation, cable tray, lugs, glands, dg set, 400 kva dg set, lt power panel and light panel and armored cable of different sizes have been made.

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

Corporations/Associations/Others

CTN :39995301

25 Apr, 2025 7.27 Lacs

Multi City - Karnataka

Tender For installation of lt 3 pole power contactor to fcma starter panel-3 and standby fcma starter of belagola 3.5 mgd pumping station

State Government

CTN :39666264

22 Apr, 2025 16.76 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : supply of c&s electric make lt breaker panel spare at bltps 2*250 mw power plant padva. - c&s make 415v spring charging motor (amh-1) 220v dc, 2, 15, numbers, 20, c&s make air circuit breaker,type-aha-08-n,tp ed,rating-in 800a,ue 415vac,ui 1000vac,f 50/60hz,icu ics 50ka,icw(1s) 50ka with complete accessory without release protection, 6, 30, number, 25, power contactor complete assembly for 95a, tp contactor ac3, 1no + 1nc, tc1d9511ef5, 10, 20, number, 20, aux. contactor, 2no+2nc, coil:220 v dc, make:tc, type:tca3-dn22, 14, 40, number, 40