Latest controller system Tenders | Government controller system Tenders

CTN :41814282

22 Sep, 2025 NA

Multi City - Multi State

Tender For supply of simulator data display system , simulator data storage controller system , wireless key board , wireless mouse , vga cable , flying controller , power cable

CTN :41777886

06 Oct, 2025 NA

Khorda - Odisha

Tender For supply of supply of mechanical engineering and electrical engineering and management books d d - engineering mechanics book, author- s.s. bhavikatti , strength of materials book, author- r.k. rajput , theory of machines book, author- r.s. khurmi and j.k. gupta , design of machine elements book, author- v.b. bhandari , thermal engineering book, author- r.k. rajput , fluid mechanics and hydraulic machines book, author- r.k. bansal , heat and mass transfer book, author- r.k. rajput , production technology book, author- r.k. jain , engineering thermodynamics book, author- p.k. nag , mechanical vibrations book, author- g.k. grover , shigley s mechanical engineering design book, author- richard g. budynas and j.k. nisbett , marks s standard handbook for mechanical engineers book , roark s formulas for stress and strain book , fundamentals of thermodynamics book , engineering mechanics- dynamics book, author- j.l. meriam and l.g. kraige , mechanics of materials book, author- ferdinand p. beer and e. russell johnston jr. , the feynman lectures on physics book , an introduction to mechanics book , design of machine elements book, author- m.f. spotts and t.e. shoup , mechanical engineering reference manual for the pe exam book, author- michael r. lindeburg , basic electrical engineering book, author- d.p. kothari and i.j. nagrath , electrical technology vol. 1 and 2 book, author- b.l. theraja , electrical machines book, author- p.s. bimbhra , power system engineering book, author- d.p. kothari and i.j. nagrath , control systems engineering book, author- i.j. nagrath and m. gopal , signals and systems book, author- a.v. oppenheim and a.s. willsky , digital signal processing book, author- john g. proakis and dimitris g. manolakis , microelectronic circuits book, author- adel s. sedra and kenneth c. smith , electrical measurements and measuring instruments book, author- e.w. golding and f.c. widdis , switchgear and protection book, author- j.b. gupta ) /bid number : gem/2025/b/6664349 * /dated: 10-09-2025 & & / bid document 1 / 43 & & ' ' /item category , electrical engineering- principles and applications book, author- allan r. hambley , power system analysis book, author- hadi saadat , principles and applications of electrical engineering book, author- giorgio rizzoni , electric machinery fundamentals book, author- stephen j. chapman , modern power system analysis book, author- d.p. kothari and i.j. nagrath , electric circuits book, author- james w. nilsson and susan a. riedel , control systems engineering book, author- norman s. nise , electrical engineering 101 book, author- darren ashby , the art of electronics book, author- paul horowitz and winfield hill , electrical power systems book, author- c.l. wadhwa , principles of management book, author- p.c. tripathi and p.n. reddy , organizational behaviour book, author- stephen p. robbins and timothy a. judge , financial management book, author- i.m. pandey , marketing management book, author- philip kotler and kevin lane keller , operations management book, author- s.n. chary , human resource management book, author- gary dessler , strategic management book, author- fred r. david , business communication book, author- meenakshi raman and prakash singh , managerial economics book, author- d.n. dwivedi , production and operations management book, author- k. aswathappa and k. shridhara bhat , management book, author- koontz and weihrich , fundamentals of management book -global edition, author- stephen p. robbins , the ceo factory management lessons from hindustan unilever book, author- sudhir sitapati , the z factor my journey as the wrong man at the right time book, author- subhash chandra , the e-myth manager book, author- michael e. gerber , leaders eat last book, author- simon sinek , the first-time manager book, author- jim mccormick , the speed of trust book, author- rebecca r.merrill , the art of management book, author- shiv shivakumar , winning in the digital age

Central Government/Public Sector

CTN :41759327

30 Sep, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of controller system for i level tester

Central Government/Public Sector

CTN :41639094

16 Sep, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of programmable logic controller system for excitation system as per bhel specification no. cee/24019 r , plc with canbus support as per bhel spec. no. cee/25020 rev00 item-001

State Government

CTN :41365007

15 Sep, 2025 NA

Phaltan - Maharashtra

Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te

State Government

CTN :41719915

04 Sep, 2025 30.00 Lacs

Multi City - Bihar

Tender For biharsupply of machines and laboratory equipments for mechanical & civil engineering in the premises of government engineering college, kaimur - demonstrate & study of steam boilers and its mounting & accessories, to learn the mechanical properties of engineeing materials. (chart/, flex), to learn the working of steam power plant. (chart/ flex), to learn the working of vapour compression refrigeration system., (chart/ flex), to learn the working of impulse steam turbines. (cut section model), to learn the working of gas turbines. (chart/flex), to learn the working of reaction steam turbines. (cut section model), to learn the working of vapour absorption refrigeration system, hemispherical sectional models of screw threads, , standard bolt, , bolts of four types, , foundation bolts, , locking arrangement of bolts, , rivetted joints-wooden, , bush bearing, , plummer block or pedestal bearing, , foot step bearing, flexible coupling, , flanged coupling, , stuffing box, , connecting rod , spark plug, , sine bar complete set, (a) sine bar (100mm, hardened tool steel), (b) sine bar (200mm. hardened tool steel), sine centre complete set, sine centre complete set ( roller distance 200mm centre height : 65mm or roller distance 300mm, centre height 75 mm), vernier bevel protector, vernier bevel protector( blade edge angle 60 deg , 45 deg edge, blade length 150mm, ) range = 360deg, lc: min, it is capable of ), lathe tool dynamometer, x direction measuring range : 0 ± 3000 n ( 0. 1 n sensitivity ), y direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ), z direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) measurement : x, y & z direction force measurement simultancously. data recording, signal conditioner : gpds signal conditioner accuracy = ± 0.5 %, computer: window operating system, software “ i t “ lathe tool software exclusively designed and developed for measuring the forces in x. y & z direction during operation., software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording, printing, transfer to ms excel, dimensions : sensor ( 55 x 125 x 55 mm ) 20mm x 80mm segment provided for fitting in the tool holder of lathe machine, power requirement : 220 v 1 phase, 50 hz, drill tool dynamometer, axial load capacity : 500kgf. torsional load capacity 50 kf. cm. computer: window operating system, software “ dt drilling tool software exclusively designe and developed for measuring axial & torsional forces developed during drilling operation, software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording. printing, transfer to ms excel, vernier gear tooth caliper (0.02mm resolution, mi-26), slip gauge complete set slip gauge block set, metric, 87 or 103 block of grade 1 steel, optical flat, optical flat, l=12mm, d=45mm, 0.2um, optical flat, l=12mm, d=45mm, 0.1um, optical flat, l=15mm, d=60mm, 0.2um, optical flat, l=15mm, d=60mm, 0.1um, optical flat, l=0.5". d=1.8", 0.000008", optical flat, l=0.5". d=1.8", 0.000004", optical flat, l=0.6", d=2.4", 0.000008", optical flat, l=0.6", d=2.4", 0.000004", vernier calliper 300 mm, vernier calliper (digital) 150mm, micrometer outside 0-25mm, digital micrometer (25mm, 0.001mm resolution), journal bearing test rig, description: the apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a fhp motor. the bearing is freely supported on the shaft and scaled at the motor end. the speed of the motor is controlled by the speed control uniy. manometer is mounted on bearing to measure the pressure at different position around the circumference, bearing is free and can be adjusted at any position of circular scale. the bearing can be loaded by attaching weights to the arm supported beneath it., technical details:, journal : diameter 50 mm bearing : diameter 55 mm weights : 4 weights, motor : variable speed fhp motor, control panel :

State Government

CTN :41619694

09 Sep, 2025 NA

Parganas - West Bengal

Tender For supply, installation and trials of laboratory instruments equipment apparatus with training for quality control ii division at siliguri, p.w.(roads) directorate - nomenclature of machine/instrument and work required: supply, of only vacuum pump cum controller required for existing digital 4 station vacuum indicator for absolute viscosity test. the same will have to he installed on the existing machine and after installation, necessary trials are to be carried out. relevant is code: is: 1206: 2022 (part ii). specification: the pump connected with the vacuum system should be capable of maintaining a vacuum within 2 0.05 cm of the desired level up to and including 30 cm of mercury, and should have the capability of holding the desired pressure throughout the period of a particular test. the pump should have both analogue (with divisions of 0.05 cm of hg) and digital pressure gauge (capability of displaying minimum of 0.05 cm of hg). the vacuum pump controller should be supplied with a 4-position manifold to apply vacuum simultaneously up to four positions and perform viscosity determinations. equipped with dedicated on/off switches for each position and supplied with blue silicon tubing. the pump should have the capability of withholding the pressure set for tests and also maintain it throughout the test. vacuum pump should be the part of vacuum system [pump should be inbuilt with in the vacuum system along with analogue and digital display of vacuum). note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply 2. necessary tests and trials will have to be carried out to the satisfaction of engineers of q.c.-ii division at siliguri. 3. two year comprehensive warranty of total system from the date of satisfactory completion of onsite installation, commissioning and training of the instrument., nomenclature of machine/instrument and work required: supply, installation of u-tube, modified reverse flow viscometer for opaque liquid required for kinematic test of bitumen. details: tube no. 6 & 7 with 01 no. stand each. relevant is code: is 1206 (part 3): 2021 specification: note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply. 2. necessary tests and trials will have to be carried out to the satisfaction of engineers of qc-ii division at siliguri. 3. two year comprehensive warranty of total system from the date of satisfactory completion of onsite installation, commissioning and training of the instrument., nomenclature of machine/instrument and work required: supply & installation of serological water bath. specification: the bath should have double walled structure, having facility of digital controller cum indicator. the bath should have stirring arrangement. inside wall should be of stainless-steel seamless ss 304 seamless, min. thickness 1.0 mm, with rounded corners for easy cleaning with proper drainage system having ptfe valve and hose pipe (15mm inner dia. min). outer wall to be of ms and properly insulated with cfc-free high-density insulation. minimum temp. range is 5°c to 95°c, 20.2°c. size should be minimum 28 l: -600 w 400d 350 h mm; for 8 standard racks, with adjustable height, compatible with common test tubes (10-50 mm dia.) and other bottles/beakers. note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply. 2. necessary tests and trials will have to be carried out to the satisfaction, nomenclature of machine/instrument and work required: supply & installation of burette stand with clamp specification: boss head & rod (with stainless steel corrosion resistant rod (length 18") the rod diameter is 1 cm and solid black coated support stand base (6"x4"). should be made of high-quality anti-corrosion & rust-proof stainless steel. the base should be padded to prevent scratches on the surface and better gri

CTN :41720939

25 Sep, 2025 NA

Multi City - Multi State

Tender For supply of study of self and mutual inductance measurment trainer kit , battery charger , inverter , battery for inverter , colour coded resistances , sliding rheostats , induction coil , dc regulated power supplies , multipurpose wire stripper and cutter , combination plier insulated 8 inch , round wire gauge , voltage or line tester , voltage or line tester non contact , tape roll , rccb 40 amps 4 pole , single core wire 4 sqmm roll , single core wire 2.5 sqmm roll , single core wire 1.5 sqmm roll , single core wire 1 sqmm roll , 3 phase 4 core cable 10mm square roll , 3 phase 4 core xlpe cable 35mm square roll , display board different wires and cable , display board different switches , desert cooler , room heater , electric kettle , voltage stabilizers , digital megger , single phase power measurment kit , three phase switch fuse unit , dol starter , electric drill kit , l key set , soldering gun kit , model cut section ceiling fan , power cable jointing kit , single phase lamp load , three phase lamp load , led street light , heavy duty power extension board , pvc casing capping , flexible pvc pipe , pvc conduit pipes , motor coil winding machine , heat convector , electric oven , digital clip on meter , measuring tape , screw driver mains voltage tester , trainer board to study chopper , trainer board to study dual converter , trainer board to study cycloconverter , study of mosfet trainer kit , scr based lamp intensity control , parallel operation of alternator , dc series motor , single phase transformer , sepratly excited dc generator , tachometer , synchronous generator , rs flip flop , t flip flop , multiplexer and demultiplexer trainer kit , portable moving iron voltmeter , portable moving iron ammeter , portable wattmeter , portable standard energy meter , thermocouple trainer kit , portable frequency meter , model cut section of refrigerator , cut section model of air ) /bid number : gem/2025/b/6640554 * /dated: 05-09-2025 & & / bid document 1 / 127 & & ' ' /item category conditioner , mercury vapor lamp kit , sodium vapor lamp study kit , halogen lamp study kit , neon lamp study kit , compact fluorescent lamp cfl study kit , resistance welding machine , 8085 microprocessor trainer kit , 3 core copper cable roll , 4 core copper cable roll , 2 core aluminium cable roll , double pole mcb with box , 4 pole mcb with box , led tube lights , galvanized iron wire 100 mtr , nut bolt with washer , circle cable clip , heavy duty switch socket with gang box , thimbles , anvil 50 kg with stand , ball peen hammer 500gm , basted file 12 inch , bench type drill machine capacity 13 mm , bench vice , divider 12 inch , flat file 12 inch , flat file rough 10 inch , grinder , hand hacksaw frame , hs twist drill 5, 6.8, 8.5, 10.5, 12.5, 5 or 8, 3 or 4 , pipe vice , pipe wrench 8 inch , screw driver kit , sledge hammer 5 kg , smooth file 12 inch , square face hammer 500 gm , steel foot rule 300mm , steel foot rule 600mm , steel number punch 5mm , try square 8 inch , vernier caliper lc 0.02mm, 150mm , acetylene cylinder , acetylene pipe 15 meter , acetylene regulator with spanner , chipping hammer , circle cutting machine , edge folding machine , foot shear machine , foundry bellow , funnel stake , gaggers , gate cutters , gloves pair , hand rammer , hand stake , ladle , ladle holder , leg vice 4 inch , lifter or tong 2 in 1 , milling machine conventional , molding board , molding boxes flasks , oil fired tilting type , oxygen regulator with spanner , oxygen cylinder , oxygen pipe 15 meter , planner , pneumatic rammer , riddle , rivet set , rivet snap , round die handle , round stake , sand mix muller , scriber 8 inch , shaper , sheet steel wire gauge , shovel , single snip , slick , swab , swage block 4 inch , tap wrench 5 or 16 in 1 in , taper stake , tong 12 inch flat , trowel , welding screen , welding torch high pressure , welding torch low pressure , gear tooth vernier , sling psychrometer study of self and mutual

State Government

CTN :41023796

16 Sep, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of miscellaneous consumables for unit coh and routine maintenance work at emd-2-tg wtps,gsecl. - ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, godrej make 7 lever door lock, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, polyester webbing sling, swl 5000 kg x 3 mtr, impact wrench power/battery operated, cordless screw driver power/battery operated, flat cable 3 corex4 sqmm with copper conductor for submersible motor, painting brush size 3" (75 mm), painting brush size-38 mm, allen key set of size : 1/16" (inch) to 3/8" (inch), allen key set of size 1.5 to 10 mm, rusting clean brush, wire brush round 1.1/2", plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., hand drill machine size 13mm, britelite 1200 meters long rang torch rechargeable led flashlight with charger., drill bit set it/addision,size;2 mm to 10 mm., pvc hand gloves acid/alkali proof size 16" (yelow colour), esab earthing clamp, washing powder ( 1 kg pack ), transparant tumbler 1 ltr, pvc buckets-15ltr, painting brush size 2" (50 mm), self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, dr. back make backtol red in 1 lit. tin varnish, light gray paint size 4 liters light gray paint size >> 1 liter., rotary selector switch capacity-12amp ,3 way no-off 3 position 60 degree,kaycee make cat no-2t16c, test leads (probes) for digital multimeter, auxiliary relay re-300 coil voltage 250v dc, jyoti make re-300 plug in type relay , coil voltage 240 v,50hz ac with led indication & 4 change over contact having 10 amp rating., plastic tool box with organizer product no.:- ptb 16 (195 x 240 x 435), integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - red., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - green., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - amber., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - white., integral led type solid state indicating lamp with lamp holder & lens for 230 v dc +/- 10 percent panel cutout, 30.4 mm dia colour blue, start push button c & s make type- rb2-ba3+rb2-bz10 (rcb2-ba3)., mushroom head stop pushbutton turn to release c& s make,type- rb2-bs54+rb2-bz10 (rcb2-bs54)., contact element -1no. code rb2be101 make c&s, contact element, 1 nc contact, c and s cat. no. rb2-be-102, 250 v ac/dc control supply switch, capacity-16amp,type-base mount., multifunction multirange timer type:-micon225 0.1 sec -10 hrs., 24/240 vac/dc, cat no: 2a5dt5, 2c/o make:-l&t, manila rope, size: 16 mm dia, manila jute rope size 12 mm, auxiliary relay of jyoti make re-300 with led indication, 4 c/o contacts for 110v ac., jyoti make re-300 plug in type relay , coil voltage 24 v,dc with led indication & 4 change over contact having 10 amp rating.

Central Government/Public Sector

CTN :41669396

01 Sep, 2025 NA

Thiruvananthapuram - Kerala

Tender For corrigendum - supply, installation, testing and commissioning of centralized dust controller system for cvps at bankâs main office building, thiruvananthapuram

Controller System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government

Central Government/Public Sector