Latest conveyor motor Tenders | Government conveyor motor Tenders

State Government

CTN :42988381

08 Dec, 2025 27.9 Thousand

Srinagar - Jammu And Kashmir

Tender For repair works for 20 hp open-well submersible motor at wss ld

State Government

CTN :43019857

24 Dec, 2025 NA

Rupnagar - Punjab

Tender For special repair/overhauling and procurement of spares for 02 nos. ingersoll rand air compressors 7t4 - gasket set for 7t4, crankshaft assembly with bearing, bush, nut-7100, bushing, crankpin - 7100, rod, connecting-lp, rod, connecting, seal, oil-viton double lip 1.50", 7100/71t2, piston 3", 15t2, t30, cylinder 3" hp, assembly piston - hp, ring piston set 3 for lpg-7.5, r ring piston set 17t4, valve assembly - complete 3, 7t4/15t, valve and stop plt assembly 15 kd, 7t4, assembly, crank pin cap, valve pilot t-line, pin thrust assembly - t-line, element filter 10 micron, t-line., screw cap, hex drld cap, crank pin 3/8 x 7/8l, oil container - 5 ltr, motor-7.5 hp, 1440 rpm, contactor-17 amp (ac3), 220v coil, size m4-35x75 mm, service charges for deputing service engineer for repair and overhauling of 02 nos. ingersoll rand compressors (model 7t4)

CTN :42932893

05 Dec, 2025 81

Channagiri - Karnataka

Tender For corrigendum : tender for purchase of drinking water supplies material and motor repair and maintenance in s.c/s.t colonies of all villages under lingadahalli gram panchayat 2024-25 - gp_lgh_dm// pvc 1 inch pipe, gp_lgh_dm// pvc 1.5 inch pipe, gp_lgh_dm// pvc 2 inch pipe, gp_lgh_dm// pvc 2.5 inch pipe, gp_lgh_dm// pvc 3 inch pipe, gp_lgh_dm// pvc 1 inch valve, gp_lgh_dm// pvc 1.5 inch valve, gp_lgh_dm// pvc 2 inch valve, gp_lgh_dm// pvc 2.5 inch valve, gp_lgh_dm// pvc 3 inch valve, gp_lgh_dm// elbow 1 inch, gp_lgh_dm// elbow 2 inch, gp_lgh_dm// elbow 2.5 inch, gp_lgh_dm// elbow 3 inch, gp_lgh_dm// g i 2 inch pipe, gp_lgh_dm// g i 2 inch collar elbow bend, gp_lgh_dm// pvc reduced collar 2.5 inch, gp_lgh_dm// pvc gum, gp_lgh_dm// steel water taps, gp_lgh_dm// upvc gums, gp_lgh_dm// upvc collar 3 by 4, gp_lgh_dm// upvc bend 3 by 4, gp_lgh_dm// upvc elbow 3 by 4, gp_lgh_dm// upvc fta, gp_lgh_dm// upvc mta, gp_lgh_dm// auto starter, gp_lgh_dm// preventer, gp_lgh_dm// ams meter, gp_lgh_dm// pvc bend 1 inch, gp_lgh_dm// pvc bend 2 inch, gp_lgh_dm// pvc bend 2.5 inch, gp_lgh_dm// pvc caller 1 inch, gp_lgh_dm// pvc collar 2 inch, gp_lgh_dm// pvc collar 2.5 inch, gp_lgh_dm// g i nipplas 2 inch, gp_lgh_dm// amps pause 63, gp_lgh_dm// cable, gp_lgh_dm// relay, gp_lgh_dm// pvc service handle 2.75 inches, gp_lgh_dm// pvc reduce collar 2 inches, gp_lgh_dm// upvc pipe 3 by 4, gp_lgh_dm// gi bend 25mm, gp_lgh_dm// ready collar, gp_lgh_dm// gi nippal, gp_lgh_dm// novelties, gp_lgh_dm// falsest, gp_lgh_dm// gi 1.25 pipe, gp_lgh_dm// oilseal, gp_lgh_dm// gap washer, gp_lgh_dm// thrust bearing set, gp_lgh_dm// milak paper, gp_lgh_dm// 10x140 stud ss, gp_lgh_dm// auto_starter, gp_lgh_dm//_preventer, gp_lgh_dm// fuse (63a), gp_lgh_dm//_relay, gp_lgh_dm// ammeter, gp_lgh_dm// voltmeter, gp_lgh_dm// indicator, gp_lgh_dm// 2.5 sq cable, gp_lgh_dm// 4 sq mm cable, gp_lgh_dm// 6 sq mm cable, gp_lgh_dm// 6sq mm aluminiun wire, gp_lgh_dm// 10sq mm aluminium wire, gp_lgh_dm// 4 sq mm mm aluminium wire, gp_lgh_dm// rewinding copper wire, gp_lgh_dm// bore cap, gp_lgh_dm// bore clamp, gp_lgh_dm// panel board, gp_lgh_dm// panel board box, gp_lgh_dm// starter lt/lk, gp_lgh_dm// 7.5/16 hp motor with pump, gp_lgh_dm// 7.5/14 hp motor with pump, gp_lgh_dm// 7.5/18 hp motor with pump, gp_lgh_dm// 10/16 hp motor with pump, gp_lgh_dm// 10/18 hp motor with pump, gp_lgh_dm// 10/20 hp motor with pump, gp_lgh_dm// 14 stage pump, gp_lgh_dm// 16 stage pump, gp_lgh_dm// 18 stage pump, gp_lgh_dm// 20 stage pump

CTN :43022361

10 Dec, 2025 173

Mandya - Karnataka

Tender For supply of water supply materials to hulivana gram panchayath - hul_ dol starter m, hul_ dol starter ltlk, hul_ 100amps fuse unit, hul_ 63amps fuse unit, hul_ 5 inch fta, hul_ 6 inch fta, hul_ 5 inch mta, hul_ 6 inch mta, hul_ 5 inch pvc tee , hul_ 6 inch pvc tee , hul_ 6 inch plain end, hul_ 5 inch pvc pipe bend, hul_ 6 inch pvc pipe bend, hul_ 5 inch pvc elbow, hul_ 6 inch pvc elbow, hul_ 5 inch pvc pipe, hul_ 6 inch pvc pipe, hul_ 5 inch pvc collar, hul_ 6 inch pvc collar, hul_ 5 inch repair collar, hul_ 6 inch repair collar, hul_ 7.5hp to15hp preventor, hul_ 7.5hp preventor, hul_ relay unit-motor, hul_ 6 inch threaded end cap, hul_ 2 inch gi pipe, hul_ 6 hp motor pump with 10 stage, hul_ 7.5 hp motor pump with 12 stage, hul_ amps meter, hul_ 2 inch bore clamp, hul_ 2.5 inch bore clamp, hul_ contactor unit, hul_ 7 inch cassing pipe, hul_ cylinder, hul_ electrical contact kit, hul_ dol electrical panel board, hul_ sada electrical panel board, hul_ 4sqmm 3core copper cable flat type, hul_ 0.5 inch gi tap, hul_ 0.75 inch gi tap, hul_ indicator, hul_ mrf tape, hul_ no volt coil, hul_ 10 stage pump, hul_ 12 stage pump, hul_ pcv tape roll, hul_ relay ltlk, hul_ 1.2 mm rewinding copper wire, hul_ shalk thrid, hul_ volt meter, hul_ bolt nut 3by8 inch, hul_ bolt nut 5by8 inch, hul_ rotor bush, hul_ do bush, hul_ stg bush, hul_ bucket washer, hul_ borewell handle, hul_ borewell head, hul_ borewell water tank, hul_ borewell pedestal stand, hul_ mcb 4 pole, hul_ 1.25 inch gi collar long, hul_ 1.25 inch gi pipe, hul_ gm upper valve, hul_ gm lower valve, hul_ hdpe end connector, hul_ 1.25 inch hdpe pipe, hul_ 1.5 inch hdpe pipe, hul_ impellers, hul_ m-12 boltnuts, hul_ nrv lather, hul_ plunger rod 3 meter, hul_ stick & paper, hul_ thrust bearing & bottom, hul_ x nipple, hul_ 2hp v4 sm motor pump 20stage, hul_ 3hp v4 sm motor pump 30stage, hul_ 0.75 inch cpvc ball valve, hul_ 1 inch cpvc ball valve, hul_ 0.75 inch cpvc elbow & collar, hul_ 1 inch cpvc elbow & collar, hul_ 0.75 inch cpvc tee, fta, mta, hul_ 1 inch cpvc tee, fta, mta, hul_ cpvc gum 29ml, hul_ 1 inch cpvc pipe, hul_ 0.75 inch cpvc union and tank nipple, hul_ 1 inch cpvc union and tank nipple, hul_ gargen pipe 0.75 inch , hul_ gargen pipe 1 inch , hul_ 0.5 inch pvc mta & fta & end cap, hul_ 0.75 inch pvc mta & fta & end cap, hul_ 1 inch pvc mta & fta & end cap, hul_ 1.25 inch pvc mta & fta & end cap, hul_ 1.5 inch pvc mta & fta & end cap, hul_ 2 inch pvc mta & fta & end cap, hul_ 2.5 inch pvc mta & fta & end cap, hul_ 3 inch pvc mta & fta & end cap, hul_ solvent cement 100, hul_ solvent cement 50, hul_ solvent cement 250, hul_ 0.75 inch cpvc pipe, hul_ 0.5 inch pvc ball valve, hul_ 0.75 inch pvc ball valve, hul_ 1 inch pvc ball valve, hul_ 1.25 inch pvc ball valve, hul_ 1.5 inch pvc ball valve, hul_ 2 inch pvc ball valve, hul_ 2.5 inch pvc ball valve, hul_ 3 inch pvc ball valve, hul_ 4 inch pvc ball valve, hul_ 2.5 inch pvc elbow, hul_ 3 inch pvc elbow, hul_ 4 inch pvc elbow, hul_ 2 inch pvc joint collar, hul_ 2.5 inch pvc joint collar, hul_ 3 inch pvc joint collar, hul_ 0.5 inch pvc pipe collar, hul_ 0.75 inch pvc pipe collar, hul_ 1 inch pvc pipe collar, hul_ 1.25 inch pvc pipe collar, hul_ 1.5 inch pvc pipe collar, hul_ 2 inch pvc pipe collar, hul_ 2.5 inch pvc pipe collar, hul_ 3 inch pvc pipe collar, hul_ 4 inch pvc pipe collar, hul_ 1.25 inch gi bend, hul_ 2 inch gi bend, hul_ 2.5 inch gi bend, hul_ 2 inch gi collar h or v, hul_ 2.5 inch gi collar h or v, hul_ 2 inch gi non return valve, hul_ 2.5 inch gi non return valve, hul_ 0.5 inch gi pipe nipple 1 feet, hul_ 0.75 inch gi pipe nipple 1 feet, hul_ 2 inch gi pipe nipple 1mtr, hul_ 0.5 inch pvc elbow, hul_ 0.75 inch pvc elbow, hul_ 1 inch pvc elbow, hul_ 1.25 inch pvc elbow, hul_ 1.5 inch pvc elbow, hul_ 2 inch pvc elbow, hul_ 0.5 inch pvc pipe, hul_ 0.75 inch pvc pipe, hul_ 1 inch pvc pipe, hul_ 1.25 inch pvc pipe, hul_ 1.5 inch pvc pipe, h

CTN :42996548

11 Dec, 2025 NA

Chikhaldara - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - gram panchayat; motor 7.5 hp; service provider

State Government

CTN :42901635

06 Dec, 2025 1.50 Lacs

Shimla - Himachal Pradesh

Tender For restoration of rain damage lwss dhar bouli ropri in gp bharara, teh. sunni distt. shimla hp. (sh. repair of 25 hp motor at lwss makarcha panehra )(under dc deposit)

State Government

CTN :42903461

06 Dec, 2025 1.50 Lacs

Shimla - Himachal Pradesh

Tender For name of work restoration of rain damage lwss tamroru jhander in gp basantpur, teh. sunni distt. shimla hp. (sh. repair of 65 hp motor set 2 no. at 1st stage.)(under dc deposit)

State Government

CTN :43018527

12 Dec, 2025 1.95 Lacs

Bilaspur (Hp) - Himachal Pradesh

Tender For annual repair and maintenance of lwss namhol 1st stage in tehsil sadar district bilaspur (sh rewinding of 125 hp slipring induction motor crompton greave make set no.1 sr. no. acwty70434)

Corporations And Associations And Others

CTN :42997321

06 Dec, 2025 1.66 Lacs

Thanesar - Haryana

Tender For amtc of ephs in sector 2 ue kurukshetra repair of 25 hp submersible motor pump mccb gravel etc complete in all respect and all other work contingent theretoa mtc of ephs of ambala, kurukshetra, naraingarh, shahabad and pehowa for the year

Corporations And Associations And Others

CTN :43000550

06 Dec, 2025 1.66 Lacs

Thanesar - Haryana

Tender For amtc of ephs in sector 3 ue kurukshetra repair of 25 hp submersible motor pump and submersible cable etc complete in all respect and all other work contingent thereto

Conveyor Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Corporations And Associations And Others

Corporations And Associations And Others