Latest conveyor system Tenders | Government conveyor system Tenders

CTN :41762173

15 Sep, 2025 NA

Cuddalore - Tamil Nadu

Tender For supply of plc lab items - furnitures items, plc based dol starter, interfacing of discrete field devices with plc, plc based star delta starter, plc based forward and reverse control of induction motor*, plc based conveyor system with pre warning siren, plc based counting of moving objects on a conveyor, plc based water level control system , plc based counting of moving objects on two conveyors, plc based car parking control sysyem*, plc based fan control for energy conservation, plc based three floor lift control system, plc based illumination control system.

CTN :41761965

16 Sep, 2025 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electrical and electronics engineering department - supply of equipment for electrical and electronics engineering department:, plc with digital & analog i/o moduleinbuilt power supplyadditional voltage sources 12v,5v8 digital inputs with indication led s6 digital outputs with indication led s2 analog inputs with inbuilt ldr potentiometer2 analog outputs with inbuilt dc motor speed controlpower on/off indication led sinbuilt push button:3 inbuilt latch switch:2inbuilt toggle switch:2inbuilt buzzerusb port for programmingconnecting cableswooden enclosure, interfacing of discrete field devices with plc kitsequence of operation:develop ladder logic in plc to execute the following logical relation between the input and output field devices.y= a+b+c+dy= a.b.c.dy=(a+b).(c+d)y= (a.b)+(c.d)interface specifications:plc input interfacing push button(a)limit switch (b)reed switch (c )3wire inductive proximity sensor (d)plc output interfacing buzzer (y)wooden enclosure, plc based water level control systemsequence of operation:develop and execute ladder logic in plc to fill the empty tank with liquid when the start button is pressed. when liquid reaches the high level, turn off the pump motor and turn on the solenoid valve to drain the liquid from tank. when liquid reaches the low level, turn off the solenoid valve and turn on the pump motor for refilling. interface external pilot lamp with plc to indicate the operation of pump motor and solenoid valve.interface specifications:level sensors as input to the plcwater tap as output from the plcwater pump motor control using outputs of the plcwater tank with sump2levels sensor switchespumps for filling tanksolenoid valve to drain water.12v and 24v power supply unitssteel enclosure, plc based forward and reverse control of induction motor kit. sequence of operation:develop and execute ladder logic in plc to control three phase induction motor in forward and reverse direction of rotation. interface external pilot lamp with plc to indicate the direction of rotation. check the output by interfacing plc with three phase cage induction motor.interface specifications:3 phase main contactors.3 phase input, fusesstop, start forward, start reverseforward, reverse indication lamp.proper terminal for 3 hp cage motorsteel enclosure, plc based conveyor system with prewarning siren kit sequence of operation:develop and execute ladder logic in plc using an on delay timer to delay the start of a conveyor. while press the start button, activate the warning siren for pre-set time. after the pre-set time delay the warning siren turns stop button is pressed turns off the conveyor.interface specifications:conveyor setupplc input interface start, stop push switches.plc output interfacing siren output to give alarm.plc output interfacing conveyor belt with geared dc motor drivessteel enclosure, plc based counting of moving objects on a conveyor kit sequence of operation:develop and execute ladder logic in plc for counting the object moving in the conveyor. interface manual start and stop push button to operate the conveyor motor and proximity sensor detect the object. interface buzzer to give beep sound while sensor is detecting the product. when the pre-set value of count has reached turn off the conveyor automatically.plc based counting of moving objects on two conveyors kit. sequence of operation:a manufacturing plant is arranged with two feeder conveyors for transferring the objects into the plant. develop and execute ladder logic using math instruction in plc to get the total number of objects transferred by two conveyors into the plant. when the total object count has reached pre-set count value, turns on buzzer to give beep sound for 1 second and turns off the conveyors.interface specifications:conveyor setupplc input interfacing proximity sensor with each conveyor to sense the object.plc input interfacing start push switch and stop push switchesplc output buzzer output to give ala

Central Government/Public Sector

CTN :41583297

16 Sep, 2025 5.61 Lacs

Sidhi - Madhya Pradesh

Tender For corrigendum : repairing and rewinding of 03 number, 187 kw drive motor for conveyor system of section iii, chp jayant project, ncl.

CTN :41759197

30 Sep, 2025 NA

Warangal-T - Telangana

Tender For supply of supply of procurement of 24 station elctronic carousel for bpcl lpg peethampur plant : : - 24 station carousel , auto capping unit , lpg valve changing machine , cylinder washing unit , cylinder inline test bath , chain conveyor system and driving units , itc of carousel and associated equipments , itc of chain conveyor system , amc charges year - 1 , amc charges year - 2 , amc charges year - 3

CTN :41671694

15 Sep, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing services of comprehensive operation and maintenance of trash boom attached with pontoon mounted conveyor systems to collect, remove and dispose of floating waste at 6 location in western suburbs including operation and maintenance 3 years. tender id.2025_mcgm_1213944_1.

CTN :41630471

15 Sep, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing services of comprehensive operation and maintenance of trash boom attached with pontoon mounted conveyor systems to collect remove and dispose of floating waste at 6 locations in western suburbs including o n m for 3 years

State Government

CTN :41365007

15 Sep, 2025 NA

Phaltan - Maharashtra

Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te

Central Government/Public Sector

CTN :41731790

20 Sep, 2025 NA

Raigad - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; dismantling, fabrication, erection & commissioning of et conveyor system; buyer

CTN :41474045

18 Sep, 2025 24.50 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of hydraulic hoses for various equipments and conveyors system at csctpp, chhabra

CTN :41706138

15 Sep, 2025 51.68 Lacs

Unnao - Uttar Pradesh

Tender For supply of revamping of chain conveyor system d d - dismantling of chain conveyor system , design and supply chain conveyor system , erection and commissioning chain conveyor system , supply of 5hp helical gear drive unit including erection and commissioning , supply of 3cx2 point 5 sq mm copper cable , supply of 3cx4 sq mm copper cable , laying glanding termination of 3cx4 sqmm and 3cx2 point 5 sq mm , supply of gi strip 50 mm x 6mm , dismantling of rcc rcc dismantling , dismantling of brick work

Conveyor System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector