Latest cooper conductor Tenders | Government cooper conductor Tenders

CTN :43618104

03 Feb, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of with 1 mm thk wiremesh of sizes 1505x900 mm , bunk bed scafolding made of shs 25x25x2 and fl 40x6 mm of sizes 250x850 mm , ladder shs 25x25x2 mm 300x900 mm , aluminium double leaf window 900 x 750 mm , door of 40mm puf panel with hinges and frame 800x2125mm , pvc vinyl sheet 2mm thick x 2000mm width with adhesive of sufficient quantity to apply on floor , puff insulated roof panel of 30 by 62 mm thick as per specification , puff insulated wall panel of 40 mm thick as per specification , roof ridge 2440x610 mm , flashing l 100x100x2440 mm , flashing l 40x40x2440 mm , flashing u 35x42x35x2440 mm , double bunk with 42 kg per cum density cushio folding type 2000mm x 750 mm , nut and bolt m10x60 mm , nut and bolt m12x40 mm , nut and bolt m12x75 mm , nut and bolt m12x75 mm plane headed , nut and bolt m12x150 mm , tiger bolt 50 mm dia with movable handle and base plate , anchor pin with pointed edge 450 mm , stair with step , sd screw 75 mm , sd screw 25 mm , sd screw 125 mm , pvc board of size 8 inch x 6 inch , pvc board of size 4 inch x 6 inch , socket 5 amp , switch 5 amp , angle holder made of backelite lamp holder should be insulated type , led bulb 12 watt , pvc copper cable 1sqmm single core with multistarnded conductor for earth wire in green colour , pvc frls copper cable 1 poingt 5 sqmm single core with multistranded conductor 1100 volts grade , pvc frls copper cable 2 point 5 sqmm single core with multistranded conductor 1100 volts grade in green colour for earthing , pvc insulated and sheathed copper service cable 10 sqmm 2 core , caping casing 3 by 4 inch length 10 feet , pvc elbow for casing capping of size 3 by 4 inch , pvc tee for casing capping of size 3 by 4 inch , decorative type ultra slim linear led lighting fixture with extruded led tube light fitting 18 oblique 20 watt , switch socket combination 5 amps 5 pin with gang box , mcb spn 40 amps 240 volts , mcb box with door 4way , tape insulation 10 mtr , pvc square block , ceiling rose pvc , rubber hand gloves superior quality , measuring fibre glass tape 5 mtr long , nylone rope 1 to 10mm dia 50 to100 meter oblique reel , four leg aluminium ladder 8 feet long , industrial safety helmet , brick hammer 1 point 2kgs , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , cordless pistol grip drill as per technical specification , 500 watt 13mm variable speed reversible hammer drill machine as per technical specification , angle grinder as per technical specification , nail gun as per technical specification , tile cutter as per technical specification , electric riveting machine as per technical specification , manual rivet gun , jigsaw machine as per technical specification , allen key set foldable type as per technical specification , hacksaw frame with 2 blade , neon tester , screw driver 12 inch with insulated plastic handle , tape measuring metallic 30m , cutting plier insulate 6 inch , cutting plier insulate 8 inch , pipe wrench 12 inch , pipe wrench 18 inch , spanner adjustable 12 inch , spanner adjustable 18 inch

State Government

CTN :43754834

05 Feb, 2026 14.10 Lacs

Delhi - Delhi

Tender For supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - sitc of front loading washing machine with loading capacity of 30 kg dry weight per charge heavy duty , electrically heater inner basket & outer drum stainless steel, micro countroller base cyclic timer for auto- reserve, auto- timer & auto digital temperature control, water- inlet valve drain valve complete with control panel, & electric motor for wash, driver through pulleys & v- belts and control panel operator on 3ph, 415 v, 50 hz, a.c. supply operation cycle 30 to 40 mintutes complete connection etc as required, sitc of hydro extractor machine direct- driver self- balance with automatic electromangnetic dc injection brake system having capaciy of 30 kg per charge with auto -timed top loading vibration less innner basket and outer drum stainless steel complete with specially designed electric motor and control panel operator on 415 v,3 phase , 50 hz ac supply . operation cycle 5 to 10 mintes complete connection etc as required., sitc of drying tumbler machine front loading open pocket, electrically heater with loading capacity of 30 kg . per charge complete with micro controller base cyclic timer for auto timed & auto - reserver, auto digital temperature control, fitted with control panel , one motor each for driver and blower double walled glass wool insulated outer body mild steel with inner basket stainless steel, self lint screen , v belt driver waster air exhaust etc operates on 415 v, phase 50 hz ac supply . operation cycle 40 to 60 mintes complete connection etc as reqd, supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.a) 3 x 4 sq. mm, b) 6 x 4 sq. mm, supplying and fixing of following capacity, 240/415 volts, 10ka/15ka c series mcbs suitable for lighting and other loads of following poles in the existing mcb db complete with connection, testing and commissioning etc as reqd.a) 40a, 10 ka , fp mcb (415v), b) 63a, 10 ka , fp mcb (415v), supplying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size complete as required.a) 4x 16 sqmm, b) 4x 25 sqmm, supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, operating voltage ac 140- 270 volt, frequency 50/60 hz, operating temp range -5 c to 40 c, internal surge protection of 2.5 kv with short & open circuit protection, thd 10%, p. f. 0.95, ip20, cri >80, flicker free, (flicker shouldbe below 5 %), life time (led, driver & electrical circuitry), of minimum 50000 burning hours with 70% of initial lumen maintained till life ends, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 120 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body (thickness > 1.20 mm)a) 40 watt, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in th

Central Government/Public Sector

CTN :43755104

19 Feb, 2026 NA

Bangalore - Karnataka

Tender For supply of htug cable 3x95 sqmm stranded aluminum conductor screened xlpe insulated insulation screening with extruded semi conducting compound in combination with copper tape inner sheath of pvc tape galvanized flat steel strip armored and overall pvc st 2 sheathed cable conforming to is7098(part-ii) 1985 with latest amendments. part 2 for working voltage from 3.3 kv up to and including 33 kv. detailed technical specification of bescom attached in documents. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43765953

04 Feb, 2026 NA

Mumbai - Maharashtra

Tender For supply of earth protected 20a, 240v, two pin industrial plug with socket confirming to iec 61439-3 suitable for flush mounting and surface mounting with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination, manufactured out of ec grade aluminium extruded extension tubes of minimum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordance with is:5082 specifications, duly conforming in all respects to is:2121 part-i &ii and is:2544 with provision for sustaining continuous operating temperature up to 120 c under specified service conditions. [ warranty period: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :43719375

04 Feb, 2026 4.75 Lacs

Delhi - Delhi

Tender For supply of electrical materials for day to day maintenance of ei at balak ram hospital. - supply of 6- 32 amps rating, sp mcb, c curve, 10 ka breaking capacity., supply of 6- 32 amps rating, dp mcb, c curve, 10 ka breaking capacity., supply of 40 amp, 2 pole isolator ., supply of 63 amp, 2 pole isolator ., supply of 63 amp, 4 pole isolator ., supply of 100 amp, 4 pole isolator ., supply of 40 amp rating 2 pole rccb, 30 ma ., supply of 63 amp rating, 4 pole rccb, 30ma ., supply of 20 a, spn, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure., supply of 25 mm dia isi marked, pvc conduit, supply of pvc batten / angle holder., supply of 2+6 way, spn, single door, mcb db, supply of 2+2 way, spn, single door, mcb db, supply of 4 way (4 + 12), tpn, mcb db, double door horizontal type., supply of 6 way (4 + 18), tpn, mcb db, double door horizontal type., supplying of led recessed/surface down lighter (round /square/ rectangular) smd type of following body material with pmma and prismatic diffuser and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k / 6000 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 and 120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body including trim with aluminium reflector. 12 -15 watt, supplying of panel light 2x2 ft., of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends ,cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin), sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate (t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by eng

CTN :43710800

14 Feb, 2026 NA

Bangalore - Karnataka

Tender For supply of w1 cable communication qty 10 nos d d ? g? g -degree transition 362a014 25 , adhesive epoxy polyamid kit s1125 kit 8 , copper tin coated shilded round braid 0 point 375 inch id a a 59569r36t0375 , heat shrinkable tube dr 25 raychem 0 point 187 inch by 0 point 093 inch 4 point 7 by 2 point 4mm dr 25 3 by 16 0 , hs sleeve black 0 point 750 inch by 0 point 375 inch 19 by 9 point 5 mm m23053 by 16 004 0 , hs sleeve black0 0 point 500 inch by 0 point 250 inch 12 point 7 by 6 point 4 mm m23053 by 16 003 0 , hs sleeve black 0 point 470 inch by 0 point 160 inch 12 by 4 mm m23053 by 4 303 0 , hs sleeve black 19 by 6 mm tfd 3 by 4 , marking sleeve white printable tubing 1 inch dia x 2 inch long tms sce 1 2 point 0 9 , marking sleeve white printable tubing 3 by 4 inch dia x 2 inch long tms sce 3 by 4 2 point 0 9 , marking sleeve white printable tubing 1 by 4 inch dia x 2 inch long tms sce 1 by 4 2 point 0 9 , hs sleeve clear 1 point 0 inch by 0 point 500 inch 25 point 4 by 12 point 7 mm rt 375 1 x , hs sleeve clear 0 point 250 inch by 0 point 125 inch 6 point 4 by 3 point 1 mm0 rt 375 1 by 4 , hs sleeve clear 0 point 750 inch by 0 point 375 inch 19 by 10 mm rt 375 3 by 4 , splice electrical copper crimp type insulated 16 20 awg blue colour m81824 by 1 2 , coax cable termination 24 awg f by rg 196 d 181 3224 90 by 9 , hs sleeve clear 0 point 093 inch by 0 point 046 inch 2 point 4 by 1 point 2 mm m23053 by 18 203 c , tape electrical teflon 12 point 7 mm width 60 o 5in width , electrical cable copper multi condictor tin coated 24 awg irradiation cross linked extruded polyalkene and polyvinylidene flouride insulated 600v light weight blue colour m81044 by 12 24 6 , tri axial cable copper multi strands silver coated conductor with white pvc jacketed and two layer copper tinned screen with pvc jacketd with ptfe jacketed black cable 75 ohm 30 awg 7530a5314 0 , electrical cable 2 core copper multi condictor tin coated orange and red colour comma 24 awg comma radiation , electrical cable 2 core copper multi condictor tin coated black and white colour comma 16 awg comma radiation , electrical cable copper multi condictor tin coated 22 awg irradiation cross linked extruded polyalkene and polyvinylidene flouride insulated 600v light weight grey colour m81044 by 12 22 8 , atc binding wire 0 point 3 mm dia , insulation tape pvc black 18 mm width , kapton tape , masking tape , solder soft 16 swg , solder flux , iso prophyl alcohal ipa , plastic cover 80 microns 18 inch x 24 inch , permanent marker pen black aluminium alloy connectorstaight plug olive drab chromate over cadmium plate with protective cap d38999/26we35pn jss : 50860 as per drg, aluminium alloy connectorstaight plug olive drab chromate over cadmium plate with protective cap d38999/26wb35pa jss : 50860 as per drg, aluminium alloy connectorstaight plug olive drab chromate over cadmium plate with protective cap d38999/26wd35sn jss : 50860 as per drg, aluminium alloy connectorstaight plug olive drab chromate over cadmium plate with protective cap d38999/26we35sn jss : 50860 as per drg, rf connector (jack triax trt j/n rear crimp) bj 379-29 trt jack jss : 50860 as per drg, metalic protective cap (tnc cap) with chain lock for bnc rf connector m39012/25-0021, plug gromet sealing no 22 ms27488-22-1, back shell for connector 90 degree ( l angle) for hs boot #17-38999 440hj030nf1705, back shell for connector straight for hs boot #11 38999-3,4 1 440hs027nf1104-2-063, back shell for connector straight for hs boot #11 38999-3,4 1- 440hs027nf1503-2, back shell for connector straight for hs boot #17 38999-3,4 st 440hs027nf1703-2, band clamp (band-it) id 0.88'' width 0.120'' for back shell 600-057, //bid details 2 / 40

corporations/Associations/Others

CTN :43258337

03 Feb, 2026 7.51 Lacs

Bokaro - Jharkhand

Tender For corrigendum : procurement of different types of switchyard hardware for ctps dvc d d - 33kv fixed contact assembly of hivelm isolator (double jaw) for 2000a, copper tee plate for double fix contact of 33kv hivelm isolator, connector rigid for cu make wave trap; 30mm dia. stud to twin lark conductor,condu ctor portion of crimping type & separated, with sim,nut,bolt & washer., connector flexible cu, 2 fold, 460 mmx 50 mmx 12 mm each length of compressed strip of 55 mm, hole not required, male contact tip for ite isolator, rigid type normal isolator pad connector suitable for 1½ inch ips al. tube and 2000a continuous current, connector flexible for abb make iso. pad to 2 ½ inch id al. pipe bus, connector rigid suitable for hivelm make isolator pad to 2 ½ inch ips al. pipe bus., connector wave trap 30mm dia cu stud to lark conductor, conductor portion of compression type and separated with necessary sim, nut, bolt and washer, connector flexible suitable for hivelm make isolator pad to 2 ½ inch ips al. pipe bus, connector rigid for 132 kv bimco isolator pad 2 ½ al. pipe bus, 132kv ct stud(stud dia 40mm)to 2.5 inch ips al pipe expansion type extruded al connector with bimetalic sleeve.

Central Government / Public Sector

CTN :43534761

05 Feb, 2026 NA

Hyderabad-T - Telangana

Tender For supply of 4 core x 0.5 sqmm : flexible (class-5) annealed tinned copper conductor, extruded ebxl epdm insulated, such coreslaid up, annealed tinned copper screening, extruded ebxl eva outer sheathed, 600/1000v grade, multicore screened cable confirming to clw spec no.clw/es/3/0459 alt-c or latest. [ warranty period: 30 months after thedate of delivery ]

Cooper Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others

Central Government / Public Sector