Latest copper cable laying Tenders | Government copper cable laying Tenders

Central Government/Public Sector

CTN :39010557

17 Apr, 2025 17.92 Lacs

Kashipur - Uttarakhand

Tender For bid to ras supply of cctv camera accessories - 4 mp ip camera dome , 4 mp ip outdoor bullet , 5 mp ir bullet network camera - 60mtr. , 4mp solar powered camera , 64 ch nvr , 8 tb hard disk , 24 port poe switch , cat 6 cable in mtr , 15 u rack with all accessories , 2kva online ups with 6 battery , hdmi cable 4k support 3 mtr , 3 core 1.5 sq mm electric cable , led display 55 inch , installation charges of camera and laying of cat6 cables in conduit pipe and electrical cable along with accessories require and 1 year service support at on-site

State Government

CTN :40022373

28 Apr, 2025 2.10 Crore

Thiruvananthapuram - Kerala

Tender For laying 11 kv ug cable on turn key basis and shifting rmus and transformers in coneection with road widening from mangalapuram to vavara amabalam under electrical section mangalapuram

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

State Government

CTN :39855018

25 Apr, 2025 27.48 Lacs

Burdwan - West Bengal

Tender For corrigendum : supply and installation of electrical fixtures and gadgets in bolpur ib at bolpur under burdwan zone in west bengal. - supply & delivery of 3 phase 415v fixed speed cassette type air-conditioner machine having cooling capacity not less than 14100w, eer 2.7 to 3.2, noise level not more than 56db. this cassette type air conditioning machine should be fitted with scroll compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (make-o-general /mitsubishi electric/mitshubishi heavy industries as per approved by eic/authority)., supply & delivery of 240v split air-conditioner machine having cooling capacity not less than 6875 w, isser 3.8 to 4.39, bee rating not less than 3 star, noise level not more than 46db. this split air conditioning machine should be fitted with rotary compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (o-general /mitsubishi electric /mitshubishi heavy industries as per approved by eic/authority)., installation, testing & commissioning of the above-said split ac outdoor unit on existing iron structure and indoor unit on wall & mending good the damages as per direction of e.i.c., installation, testing & commissioning of the above-said split ac outdoor unit by fixing iron angle unit on wall & mending good the damages as per direction of e.i.c., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 3/8"(for discharge) 1.15mm thickness copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 1/2"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & laying of 4core 2.5sq.mm 1.1 kv insulation grade sheathed cu cable with gas line as per direction of eic for making interconnection/communication between indoor to outdoor unit of split type ac m/c.(make- havells/finolex/polycab as approved by e.i.c), supply and laying 5/8(20mm) heavy type pvc pipe for water drainage., supplying, fabrication & fixing of iron stand of m.s. angle size (40 mm x 40mmx6mm) for installation of outdoor unit of 4.0 tr split ac incl. drilling 2 nos holes in each angle and horizontal angle angle 40 mm x40mm x 6 mm in each stand. each stand will be properly fixing by supporting angle (25x25x5mm) and flushnut on peripheral wall as per machine configuration & load with adequate service access as per direction of eic, supplying and fixing 415 v four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection (a) 160 amp fp mccb (make legrand/crabtree/siemens/l&t/ abb as approved by e.i.c) [d-8/10], supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection (make legrand/crabtree/siemens/l&t/abb as approved by e.i.c) [d-6/7] (a) 6-32 amp tp mcb, distribution wiring in 1.1 kv single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make) incl. necy. fittings as required[e-14] i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ecc [e-14/ 1(a)(iii)], s & f 3phase 9-15a , 415 v dol starter (make-l & t ,cat no. ss94351 or equivalent model of abb/siemens as per dierction of e.i.c) to be fixed on wall with all fixing accessories complete as

State Government

CTN :39999646

05 May, 2025 1.03 Crore

Kamrup - Assam

Tender For renovation upgradation of electrical distribution system of gauhati university and laying underground ug cable to rcc-1 and rcc-2 boys hostel including necessary civil works

Central Government And Public Sector

CTN :40013074

28 Apr, 2025 NA

Kolhapur - Maharashtra

Tender For construction construction of 13 buildings at various location in india firunifies network management system (unms), including finishing works, water supply & sanitary installations, electrical installations and cable laying. automatic fire detection and fire fighting system work, lift, ac ducting for hvac, split/ cassette type ac s and development works etc. - basic training centre at goa. sh: providing and fixing wall panelling in conference room at btc goa

Central Government And Public Sector

CTN :40000485

21 Apr, 2025 5.66 Lacs

Kolhapur - Maharashtra

Tender For construction c/o 13 buildings at various location in india fir unifies network management system (unms), including finishing works, water supply & sanitary installations, electrical installations and cable laying. automatic fire detection and fire fighting system work, lift, ac ducting for hvac, split/ cassette type acs and development works etc. - basic training centre at goa. sh: providing and fixing wall panelling in conference room at btc goa

Central Government/Public Sector

CTN :40004584

03 May, 2025 2.30 Crore

Goa - Goa

Tender For supply of supply and fixing of automatic bar screen , supply and fixing of sewage transfer pumps , supply and fixing of dissolved air flotation system , supply and fixing of fog free water transfer pumps , supply and fixing of fog transfer pumps , supply and fixing of bio media mbbr stream 1 and 2 , supply and fixing of tube settler media settling tank 1 and 2 , supply and fixing of air blower with motor , supply and fixing of diffusers for aeration tank stream 1 and 2 , supply and fixing of diffusers for anoxic tank stream 1 and 2 , supply and fixing of filter backwash pumps 1 working 1 stand by , supply and fixing of do indicating controller cum transmitter , supply and fixing of pressure sand filter , supply and fixing of activated carbon filter , supply and fixing of basket strainer , supply and fixing of dosing system , supply and fixing of flow meter emf , supply and fixing of flow meter , supply and fixing of gratings , supply and fixing of level switch , supply and fixing of sludge fog and f fat, oil, grease and floatables compactor , supply and fixing of sludge dryer , supply and fixing of 100mm dia upvc pipe , supply and fixing of 80mm dia upvc pipe , supply and fixing of 63mm dia upvc pipe , supply and fixing of 50mm dia upvc pipe , supply and fixing of 4 inch butterfly valves , supply and fixing of 3 inch butterfly valves , supply and fixing of 2 and half inch butterfly valves , supply and fixing of 2 inch butterfly valves , supply and fixing of 4 inch flop type , supply and fixing of 3 inch flop type , supply and fixing of 2 and half inch flop type , supply and fixing of 2 inch flop type , supply and fixing of mf backwash pump , supply and fixing of bag filter , supply and fixing of strainer , supply and fixing of micro filtration module , compressor for automation valves and mf air scoring , supply and fixing of automation panel , supply and fixing of automation valve , supply and fixing of automatic reject control valve , supply and fixing of air relief valve , supply and fixing of air flow meter , supply and fixing of pressure gauge , supply and fixing of pressure transmitter for mf , supply and fixing of cip pump , supply and fixing of mf skid , sitc of electrical panel 125a panel 1 , sitc of electrical panel 125a panel 2 , sitc of electrical panel 125a panel 3 , supply and fixing of lt cable 2c x 1 point5 sq mm , supply and fixing of lt cable 3c x 1 point5 sq mm , supply and fixing of lt cable 2c x 2 point5 sq mm , supply and fixing of lt cable 3c x 2 point5 sq mm , supply and fixing of lt cable 3c x 4 sq mm , supply and fixing of lt cable 3c x 6 sq mm , laying of lt cable 35 sq mm , supply and fixing of lt cable 300mm x 50mm x 1 point 6mm , supply and fixing of lt cable 100mm x 50mm x 1 point 6mm bid details/ 2 / 61

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

CTN :39991104

22 Apr, 2025 37.67 Lacs

West Tripura - Tripura

Tender For supply, installation, testing and commissioning of electrical panels, cable laying and other ei works for machinery operation at central institute of petrochemicals engineering & technology (cipet), bodhjunnagar, west tripura.

Copper Cable Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors