Latest copper ring terminal Tenders | Government copper ring terminal Tenders

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

Central Government And Public Sector

CTN :45474237

19 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of complete auxiliary cubicle hb1 along with equipment and cabling to clw specification noclw/es/3/0191, alt "e" or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45474238

19 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of complete control cubicle sb-1 along with all equipment and cabling (excludingcontrol electronics) for wag 9 loco as per specification no. clw/es/3/0194 alt 'i or latest. [ warranty period: 30 months after the date of delivery ] ]

CTN :45261219

16 Jun, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of tas revamp at kadapa terminal c c - supply of 3inch mfm with 4inch flange , erection, tandc of 3inch mfm , supply of 2inch mfm inc 2inch nrv , erection, tandc of 2inch mfm , camc of supplied mass flow meters , supply - 4inch sae with dpg , erect and comm of 4inch sae , sup-rtd cm temp transmitter , testing and commng of rtd , sply 4inch dcv , erect and comm of 4inch dcv , sply 2inch piston type dcv , erect and comm of 2inch dcv , sup - 2inch sae with dpg , erectand comm - 2inch sae , sup dual arm bcu , erect and comm of bcu , sup of rit , erect and comm of rit , sup-additive block-powrandtrbo , erect and comm of additive block , sup of proximity card reader , supply of proximity cards , supply and inst of face readers for biometric , barrier gate , erection and commissioning of barrier gate , terminal server - 16 port , erect and comm - terminal server , cabling works for shifting of metering assembly , mandatory spares-gantry equipm , armoured cat6a cables with shielded rj45 connectors , sup - 24cx1.5 sq. mm - frls , sup - 8 cx1.5 sq. mm - frls , sup - 4 cx1.5 sq. mm - frls , sup - 3cx2.5 sq. mm - frls , sup- 1px1.5 sq. mm - frls , sup- 2px1.5 sq. mm - frls , sup- 12 px1.5 sq. mm - frls , lay -all type of cables , load rack server , client pcs , terminal automation software , manday assistance , resident engineer during stabilisation , camc of supplied tas equipment , camc of free issue items , camc period load rack server , camc period client pcs , 24 port ethernet switch , process plc

Central Government/Public Sector

CTN :45449251

26 Jun, 2026 NA

Dakshina Kannada - Karnataka

Tender For tender for supply of 2.5 sq mm copper fork type lug suitable for stud size m3.5 typical dowells part no rs-7251 , 2.5 sq mm copper ring terminal insulated lug suitable for stud size 3 mm typical dowell part no rsi-7068 , 2.5 sq mm copper ring terminal insulated lug suitable for stud size 4 mm typical dowell part no rsi-7071 , 4-6 sq mm copper fork type lug suitable for stud size m3.5 typical dowell part no rs-7253 , 4 -6 sq mm copper ring terminal insulated lug suitable for stud size 4 mm typical dowell part no rsi-7083 , 4 -6 sq mm copper ring terminal insulated lug suitable for stud size 6 mm typical dowell part no rsi-7093 , 6 sq mm coper inline connector hd typical dowell part no cb-4 , 10 sq.mm cu tubular ter.end suitable for stud size m6 typical dowell part no cus-353 , 10 sq mm copper inline connector hd typical dowell part no eh-460 , 16 sq mm copper heavy duty terminal lug suitable for stud size m6 typical dowell part no cus-354 , 17 sq mm copper ring terminal insulated icf series suitable for stud size 10 mm typical dowell part no cus-109 , 25 sq mm copper inline connector ld typical dowell part no cb-7 , 29 sq mm copper ring terminal insulated icf series suitable for stud size 6 mm typical dowell part no cus-149 , 29 sq mm copper ring terminal insulated icf series suitable for stud size 10 mm typical dowell part no cus-151 , 35 sq mm copper heavy duty terminal lug suitable for stud size m8 typical dowell part no cus-356 , 35 sq mm copper heavy duty long barrel terminal lug suitable for stud size m8 typical dowell part no cus-283 , 35 sq mm copper ring terminal lug- non insulated suitable for stud size 8 mm typical dowell part no rs-7038 , 35 sq mm copper inline connector ld typical dowell part no cb-8 , 50 sq mm copper heavy duty terminal lug suitable for stud size m8 typical dowell part no cus-357 , 50 sq mm copper heavy duty long barrel terminal lug suitable for stud size m8 typical dowell part no cus-284 , 70 sq mm copper heavy duty terminal lug suitable for stud size m10 typical dowell part no cus-358 , 95 sq mm copper heavy duty long barrel terminal lug suitable for stud size 12 mm typical dowell part no cus-286 , 150 sq mm copper heavy duty terminal lug suitable for stud size m12 typical dowell part no cus-242 , 50 sq mm aluminium in line connector typical dowell part no als-12 , 95 sq mm aluminium in line connector typical dowell part no als-15 , 120 sq.mm al h d. inline connector typical dowell part no als-9 , 150 sq.mm al h d. lg. barrle terminal for xlpe suitable for stud size 12 mm , typical dowell part no als-xl23 , 150 sq mm aluminium tube terminal suitable for stud size 12 mm typical dowell part no als-232 , 150 sq.mm al h d. inline connector typical dowell part no als-10 , 185 sq.mm al h d. lg. barrle terminal for xlpe suitable for stud size 12 mm typical dowell part no als-xl24 , 185 sq mm aluminium tube terminal suitable for stud size 12 mm typical dowell part no als-234 , 240 sq mm aluminium tube terminal suitable for stud size 12 mm typical dowell part no als-236 , 240 sq.mm al h d. lg. barrle terminal for xlpe suitable for stud size 12 mm typical dowell part no als-xl26

CTN :45439997

15 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of simulator workstation with rugged controller , drone simulator software licence standard , high fidelity simulator workstation with rugged controller , 3d simulation software licence advanced , vr headset 6 dof and sim compatible , trainer workstation with instructor simulator , 55 inch led display for trainer workstation , networking cabling and power management lan plus ups , workstation desk and ergonomic chair set , split air conditioner 1 and half ton , posters flex banners and cut section models , printer brother t4500 , high performance cad workstation , fdm 3d printer bambu h2d with ams combo , fdm 3d printer bambu h2s with ams combo , fdm 3d printer bambu x1 carbon with ams combo , filaments abs tpu pla plaplus assorted , filament dryer creality space pi x4 or equivalent , resin 3d printer prusa sl 1s or equivalent sla or msla with resin material , industrial 3d scanner creality otter or equivalent , laser engraver and cutter machine 40 watt , wooden tables chairs and workbenches set of 06 , power management fitting and backup inverter 2 kva , advanced drone repair equipment soldering station digital microscope esd mats oscilloscope , drone electronics sensors and spares kit , storage almirahs lockable , posters flex banners and cut section models , 3 axis drone stability test jig with proprietary software , bldc motor thrust test bench with proprietary software , drone sensor integration and testing equipment , gps testing equipment with proprietary software , flight controller assembly programming station , propeller balancer , battery charging and testing station , battery repair station , drone and 3d printer service tools , soldering and rework station yihua 982d iii or equivalet , esd workbenches , workstations for tuning or programming , line of sight trainer uav with controller , vtol trainer uav with mission planner tricopter or quadcopter , fixed wing trainer uav with mission planner , fixed wing vtol uav system with day and night camera dooaf module , day and night enabled quadcopter with dooaf capability , surveillance and payload delivery drone with mission planner hexacopter or octacopter , storage box for drones and accessories , storage almirahs , lab tables and workstations with storage , split air conditioner 2 ton , interactive panel 75 inch or larger 4k uhd, multi touch with ops , 55 inch led display , study chairs with ergonomic and stackable , split ac 1 and half ton , 20 day training programme for 15 individuals with flying repair fabrication with study material , soccer drones with propeller cage , soccer drone arena including netted enclosure with goal posts //bid details 2 / 41

CTN :45373465

20 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap , aluminium alloy connector with olive drab chromate over cadmium plate wit4h copper bush and protective cap , electrical cable comma copper multi conductor tin coated plasticized pvc insulated over varnished cotton yarn braiding , electrical cable comma copper multi conductor tin coated film and pvc insulated , electrical cable comma copper multi conductor tin coated film and pvc insulated flexible hookup , copper ring terminal comma double splitter 1 point 5 sq mm x 4 point 3mm dia , copper ring terminal comma double splitter 0 point 75sq mm x 5 point 4mm dia , copper tin braid 6 x 10 mm , copper tin braid 10 x 16 mm , copper tin braid 16 x 24 mm , insulating sleeve pvc white 28 mm dia , insulating sleeve pvc white 22 mm dia , insulating sleeve pvc white 10 mm dia , insulating sleeve pvc white 8 mm dia , insulating sleeve pvc white 6 mm dia , insulating sleeve pvc white 5 mm dia , insulating sleeve pvc white 2 mm dia , locking wire steel 0 point 5 mm dia , atc binding wire 0 point 5 mm dia , insulation tape pvc black 18 mm width , cotton tape 20 mm width , poly propylane film 25 microns 50 mm width , surgical tape adhesive tape usp leukoplast 20mm width , iso propyl alcohol ipa , potting compound ana bond 909 , solder soft 16 swg sn 6 pb 37 , solder flux , aluminium clad sheet 0 point5mm thk 0 point 5 mm x 1200 x 700 mm is 737 , nylon thread white 0 1 mm dia , plastic cover 80 microns 18 x 24 , permanent marker pen black * /bid number : gem/2026/b/7513397 + /dated: 30-05-2026 ' ' / bid document 1 / 33

corporations/Associations/Others

CTN :45305430

03 Jun, 2026 2.47 Crore

Multi City - Multi State

Tender For corrigendum : camc/amc shall include routine inspection, preventive maintenance, servicing, testing, cleaning, troubleshooting, fault rectification and breakdown support for hvac/vrv systems, fire alarm pa systems, cctv systems, epabx systems, electrical installations, it infrastructure and av systems including all associated equipment, panels, controls, cabling, accessories and minor consumables to ensure safe, reliable and uninterrupted operation as per oem recommendations

CTN :45084930

29 May, 2026 NA

Uttara Kannada - Karnataka

Tender For corrigendum : supply of control room with cctv display and communication equipment at inhs patanjali - 55 inches video wall panel display unit with push bracket wall mount , surveillance system to distribute across 4 video display control unit , customised wooden fabrication work , centralisation horizontal double mounting siren 5 km , centralisation horizontal double mounting siren operates from 2 location switch control unit with armoured cable 4 core 3 sq mm 3 phase line power cabling piping and installation , poe gigabyte switch with 2 sfp modular , dual location displayunit operating system with wire mouse , installation of networking system configuration network cablling as per power cabling total entire setup

Central Government/Public Sector

CTN :45049771

18 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of heavy duty insulated copper ring terminal for 2.5 sq.mm. cable along with copper sleeve reinforcement for connection at m8 stud/bolt. [ warranty period: 30 months after the date of delivery ] ]

Copper Ring Terminal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector