Latest copper round Tenders | Government copper round Tenders

CTN :40069678

28 Apr, 2025 NA

Bangalore - Karnataka

Tender For supply of waste pipe,waste pipe,stainless steel shelf rack,towel rail / ring for bathroom,towel rail / ring for bathroom,towel rail / ring for bathroom,plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest),european pattern toilet seat vitreous china,connection pipe with nuts (v2),connection pipe with nuts (v2),connection pipe with nuts (v2),sinks,bathroom or toilet mirror (v2),bathroom or toilet mirror (v2),copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703,wire mesh fabric or cloth (v2) as per is 1568,wire mesh fabric or cloth (v2) as per is 1568,sinks / wash basins - vitreous china as per is 2556 (part 4),towel rail / ring for bathroom,towel rail / ri

CTN :40069708

28 Apr, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of copper alloy gate valve for waterworks purpose as per is 778 (q3)

CTN :40058111

28 Apr, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of copper alloy gate valve for waterworks purpose as per is 778 (q3)

CTN :40058350

25 Apr, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of copper crimping socket for 10 sq.mm cable as per drawing edts 201 ,rev-a, am-2&3 corr-2 tab-1,item no -13 ,hole dia -10.5.make-ascon ,ki,chetna,dowells ,brass copper and alloy . [ warranty pe riod: 30 months after the date of delivery ]

CTN :40065508

08 May, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of galvanised ms bolt and nut 1o x 4omm,gi bolt and nut 12 x 40mm,gi bolt and nut 14 x45mm,gi bolt and nut 14x 70mm,gi bolt and nut 16x40mm,gi bolt and nut 16x70mm,grommets metallic 754 mm head of barrel under flange 1406m,cllp jublee 58 to 78,ms washer flat rd 58 id 1116 od 1- 38 thk 0128,gi wire mesh 3 wide 16 mesh 28 swg,copper washer id 1332 od 1316 thk 132,power saw blade 450mm x35mm x 2mm matereal high speed steel,fibre glass sewing thread 116,neoprene rubber 18,neoprene rubber sheet 532 4mm,neoprene rubber synthetic 1 x 2 x 14m,neoprene rubber sheet 2 mm thk,insul tape thermal glass sealing tapewidth 50mm,glass fibre cloth 05mm thick width 1 mtr,ceramic fibre blanket 762m x 610mm x 25mm,cotton tape 1,gt thread reel sewing thread extra strong gtx549,water proof emery paper 180 9 x11,paper abrasive 9x 11 230x230mm,penetrnat developer white spray type 280ml aerosol,cleaner pentrent remover,dye penetrant red,abrush varnish 3 75mm,flux welding silver solder,solder silver brazing alloy ribbon 5mmx125mm,bolt wit

CTN :39764148

25 Apr, 2025 NA

Tarapur - Maharashtra

Tender For corrigendum : supply of copper alloy fancy taps for bathroom as per is 8931 (latest) (q3)

CTN :39732358

23 Apr, 2025 NA

Patna - Bihar

Tender For corrigendum : supply of flushing cistern (q3) , stainless steel shelf rack (q3) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3)

Central Government And Public Sector

CTN :39112820

21 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

Central Government/Public Sector

CTN :40041564

19 May, 2025 NA

Coimbatore - Tamil Nadu

Tender For wire copper 0.610mm (23swg) wire copper round enamelled 0.610 mm nominal co nductor diameter (23swg) to is:13730 part 34 grade 2. the wire shall be tested in accordance with t he relevant test details in is:13730 part -34 by the firm and copy of the test report duly signed under company seal to be send along with the supply. after receipt of wire, consignee will make the random sampling of copper wire and the same will be tested at government approved laboratory. the test c harges to be borne by the supplier in case of rejection. if wire is passed, railways will bear the test ch arges. if the ordered quantity is less than 350 kg, testing at government approved laboratory is waiv ed. however, self inspection test report should accompany the supply. if the wire is pre-inspected by t pi/rdso, testing at government approved laboratory is waived. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40041573

20 May, 2025 NA

Coimbatore - Tamil Nadu

Tender For wire copper round enamelled 0.224 mm nominal conductor diameter to is: 13730 par t-34 grade 2 the wire shall be tested in accordance with the relevant test details is: 13730 part -34 b y the firm and copy of the test report duly signed under company seal to be send along with the suppl y. after receipt of wire, consignee will make the random sampling of copper wire and the same will be tested at government approved laboratory.the test charges to borne by the supplier in case of rejecti on. if wire is passed, railway will bear the test charges. if the ordered quantity is less than 350 kgs te sted at government approve laboratory is waived. however self inspection test report should accomp any the supply. if the wire is pre- inspected by tpi/rdso, testing at government approved laboratory is waived. however, self inspection test report should accompany the supply. [ warranty period: 30 months after the date of delivery ]

Copper Round Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector