Latest copper winding scrap Tenders | Government copper winding scrap Tenders

State Government

CTN :40998627

17 Jul, 2025 NA

Manaparai - Tamil Nadu

Tender For sale of waste and scrap of gi coated ms wire from tnpl unit 2 on one time sale / as is where is basis

CTN :40633387

15 Jul, 2025 3.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : daiviya apda work under edsd- rura - carriage of various size pcc poles from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of various size st poles (9 mtr /11mtr/ 13mtr ) from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of line material viz. weasel/rabbit/racoon /dog conductor, g.i. earth wire, cross arm, angle, channel, cable boxes, static meter insulators, clamps and other line material from store center or from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., erection of p.c.c double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c double pole the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of p.c.c single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p double pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., renozzling of damaged stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work., dismentling of rusted weasal/racoon /dog conductor wire and g.i wire & safe carriage of scrap material back to store as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., laying, sagging, stringing, binding and jumpering etc. of weasal/dog/rabbit conductor in new erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for prope

corporations/Associations/Others

CTN :41008442

14 Jul, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of m.s. steel meltable,11 kv x-arm scrap,33 kv tpmokg,steel scrap r,s, joist,steel gi/gs wire scrap/earth wire scrap,tf tank scrap

corporations/Associations/Others

CTN :41008457

14 Jul, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of steel gi/gs wire scrap/earth wire scrap,transformers tanks scrap,empty oil drum 205/209/210 ltr. scrap,aluminium cable (armoured) scrap

corporations/Associations/Others

CTN :41008464

15 Jul, 2025 NA

Delhi - Delhi

Tender For auction sale of scrap transformer 25 kva 1 ph, copper winding,scrap transformer 100 kva, copper winding,scrap transformer 100 kva, aluminium winding,scrap transformer 400 kva, copper winding,scrap transformer 630 kva, copper winding,scrap transformer 750 kva, copper winding,scrap transformer 990/1000 kva, copper winding

Central Government And Public Sector

CTN :40780402

16 Jul, 2025 58.96 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of spare components and replacement of damaged components in induced draft pultruded frp counter flow cooling tower at heavy water plant (kota) site. - supply of pvc film fill block of size 6 x2 x2 ., supply of square channels of pultruded frp material of size (width/height x thickness x length): 4 inch x 1/4 inch x 24 feet., supply of c-channels of pultruded frp material of size (width x height x thickness x length): 4 inch x 1-1/8 inch x 1/4 inch x 18 feet., supply of c-channels of pultruded frp material of size (width x height x thickness x length): 6 inch x 1-5/8 inch x 1/4 inch x 18 feet., supply of complete partition sheets (frp sheets) of adjacent cells and replacement of existing partition sheets. sheet thickness: 3 mm. fasteners for installation of sheet shall be arranged by contractor., supply of hex head gi bolts with hex nut. size: m12 x 130 mm long., supply of self threading screws having hex head. size: dia 5 mm x 60 mm long., replacement of old neoprene rubber seal/grommet for distribution pipe with new seal/grommet (spare neoprene rubber seal/grommet shall be provided by dept.)., replacement of damaged water distribution nozzles with new nozzles (fasteners and gasket shall also be replaced) (spare nozzles along with fasteners and gasket shall be provided by dept.)., replacement of damaged pvc film fill blocks of size 6 x2 x2 with new fills blocks (for 410 nos. fills, spare pvc film fill sheets shall be provided by dept., contractor shall prepare fill blocks by corrugating, arranging adhesive, application of adhesive and assembly). scrap fills shall be shredded into pieces, packed in bags and shifted to designated place., replacement of damaged pvc drift eliminators with new pvc drift eliminators. (spare c type drift eliminators along with spacers shall be provided by dept., contractor shall assemble the drift eliminators)., removal, cleaning/de-choking and re-installation of water distribution nozzles., repair of leaky joints of outer frp sheets of cells by aligning sheets, jointing with fasteners and providing frp lining on joints from inside/outside. frp lining shall be of four chopped mat and two surface mats laminated with resin for 4 mm thickness., internal structural maintenance of main header, branch pipes, fill supports, main structural members of ct cells etc by replacing/providing square channels/c-channels etc supplied at sr. no. 2, 3 & 4 above.

corporations/Associations/Others

CTN :40948634

14 Jul, 2025 NA

Haldia - West Bengal

Tender For auction sale of old and used rubber conveyor belt,empty pvc drum cap 50 ltr,empty glass jar,empty plastic bags,used lub oil with barrel 210 ltr,glass scraps of different lamps, like hpsv70/150/400w,cast iron scraps of different lamps, like hpsv70/150/400w,aluminium scrap of different illumenaries items,scrap gi tin sheet,water contaminated ldo with barrel 210 ltrs,scrap nozzle tips moc-ss310

corporations/Associations/Others

CTN :40948701

18 Jul, 2025 NA

Jammu - Jammu And Kashmir

Tender For auction sale of ms scrap as per annexure,gi scrap,tin scrap,aluminium scrap,plastic scrap as per annex-2,220kv cvt,400kv cvt,split ac outdoor unit (odu),split ac indoor unit (idu),window ac,empty oil drums,electronic scrap etc as per lot annexure,brass scrap,empty n2 gas cylinders-08 nos.,hydraulic oil,216kv porcelain lightning arrester stacks,390kv porcelain lightning arrester stacks,12v 26ah battery,12v 150ah battery,gate valve (gun metal) (150nb),compaction machine with motor,oil filled heater,portable dg set, 7kva, kirloskar make,tower materials,conductors (moose),conductor (zebra),opgw cable,disc insulators (160kn),earth wire

corporations/Associations/Others

CTN :40934185

11 Jul, 2025 NA

Trivandrum - Kerala

Tender For auction sale of various types of unserviceable brake drums,unserviceable brake shoe with liner,aluminium alloy materials,cast iron scrap,unserviceable gear shaft, crown wheels, fly wheel rings,uj cross etc,ms scrap iron,iron scrap items,old gi cut pieces,scrap auto parts,iron sheet metal items,unserviceable cylinder liners,unserviceable clutch disc,various types of unserviceable clutch and clutch parts,unserviceable propeller shafts, yokes and its parts etc,various types of unserviceable water pump, air compressor, turbo etc,scrap brake chambers, ddu, air dryers, apda etc.,tata and l/l engine head and engine block,unserviceable i- beam,air suspension frame,brackets,v-bar and its parts etc,unserviceable crank shaft, camshafts, connecting rods,scrap iron sheet metal items,unserviceable crown cage assy,scrap aluminum radiator and inter cooler,unserviceable slack adjusters.,drive assy,starter pinion,de bearing,sre bearing,ce bracket etc.,unserviceable fip body,db valve body,ac assy body and its parts,unserviceable fuel injection assy. leyland/tata,all types of unserviceable fip parts,atomizers,nozzle and its parts,unserviceable propeller shaft rubber boot with bearings.,electrical materials,scrap bearing,rusted metal oil and grease barrels-210ltrs,scrap empty metal oil and grease barrels-210 lts,unserviceable old seat frames.,radiator bracket, engine cross member,air suspension pars,scrap solinoid switch(old model),scrap solinoid switch(new model),scrap copper pipes,scrap cast iron powder,unserviceable welding set,unserviceable wiper motor and its parts

corporations/Associations/Others

CTN :40905745

16 Jul, 2025 NA

Multi City - Multi State

Tender For auction sale of used mild steel scrap,the used and scrap gi sheet,the used and scrap ms cut pins,used and scrap automobile scrap

Copper Winding Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors