Latest counter balance Tenders | Government counter balance Tenders

Central Government / Public Sector

CTN :45084412

21 May, 2026 NA

Gooty - Andhra Pradesh

Tender For auction sale of others - bogie frames - 01 nos. sale on number basis, -delivery on lot basis only. lot no. 5364 26 04 05 gtl gy bf ap. available with sse dsl gy. scrap condemned unserviceable overaged cast steel one numbers of co-co alco loco bogie frames with attachment consisting of :- (rc items are :-without wheel sets each wheel set having axle box-2 no, axle- 1no, bull gear- 1no, wheel discs 2 nos. are to be returned to railway by the purchaser). bogie frame with all other attached accessories (spring, eq beam, hanger, stay plate, brake shoe, slack adjuster, saddle, tie-bar ) are offered for sale to the firm. cast steel weight in each bogie frame - 5420 kgs / 05.420 mts (approx) total quantity - 01 no total cast steel weight - 1 x 5420 ¿ 5420 kgs / 5.420 mts ( approx).1) b.no.vs76. available near bay no. 10 gtl end diesel loco shed gooty. ds-8 no.536480005, dated 13.04.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

CTN :45091883

19 May, 2026 NA

Saran - Bihar

Tender For supply of screwed- in cartridge valve model : eaton danfoss (vickers) model no. : cbv1 10 s o a 30 of following specification :- cbv: load control counter balance, 3 ported 350 bar (5000 lbf/in2) 1: pilot ratio 4:1 10: size 10, max flow : 60 l/min (15 gpm) seal : buna n s: adjustment option screw with locknut o: valve body : no body cartridge only a: free flow crack pressure : 1.4 bar (20 psi) (standard) 30: pressure range : 59 210 bar (850 to 3000 psi) any pressure setting : none special feature : none make eaton danfoss (vickers), parker, rexroth . [ warranty period: 30 months after the date of delivery ]

CTN :45031502

18 May, 2026 NA

Bargarh - Odisha

Tender For supply of equipment and furniture for saksham resource centre of pmshri schools of bargarh district - physiotherapy bed, electrical stimulation machine, height adjustable stool (steel), stepper for therapy bed, grass mat for floor, prone stander, ball pool, peanut ball, staircase, parallel bar (for children), trampoline, inclined tapered balance beam, balance board, physio mat, sensory stimulation kit

CTN :44846253

04 May, 2026 2.76 Lacs

Uttara Kannada - Karnataka

Tender For bid to ras supply of urn tea and coffee 150 cups , box salt , cork screw , counter balance spring 1 100 kgs , degchi aluminium 460x255mm , grater round , hook butcher , pestle mortar , machine bread slicing 1600cmsx45cmsx91cms , roller wood for table cover , spoon wooden large , tub 45 ltrs , basin bone china g l 2 ltrs , spice box , brush crumb , compotiers small , cup egg bone china , dish butter bone china with cover , dish pie 20 cms , donga with cover , fork desert , jug cream bone china g l 250 ml , jug milk bone china g l 250 ml , kettle tea electric 2 ltrs , knife desert , knife table large , laddle soap , machine mincing hand small , napkin table , plate tea bone china g l , plate salad bone china g l , platter bread , saucer coffee bone china g l , saucer tea bone china g l , spoon coffee , toast rack 4 patrition , tin backing bread 800 gmd , tureen soup g l 4 ltrs , pot sugar crested , pot tea coffee 1 ltr bcc , cash box , needles trussing , pan patty small , plate dessert pudding bone china g l , plate dinner bone china g l ) /bid number : gem/2026/b/7401998 * /dated: 10-04-2026 & & / bid document 1 / 33

State Government

CTN :45042156

12 May, 2026 2.45 Lacs

Bengaluru - Karnataka

Tender For single beam spectrophotometer -1, core sampler -1, analytical balance-1 each

State Government

CTN :44416950

08 May, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply and application of corrosion protection lining of 02 mm thickness on external surface of balance structures (unit 3 & 4 vertical column & horizontal beam) at bmd, stps.

State Government

CTN :44548021

28 Apr, 2026 NA

Jaipur - Rajasthan

Tender For bid to ras bid to ras supply of pharki , scoop set , enamel plate , laboratory technical equipment (portable balance with weight) , sample divider , laboratory technical equipments (seive sets) , labortatory technical equipment (counter balance)

Central Government And Public Sector

CTN :44687431

30 Apr, 2026 NA

Raebareli - Uttar Pradesh

Tender For corrigendum : tender for supply of calibration of aviation standard tools and equipments : : - battery charger alpha c20/25 , battery charger alpha c20/25 , battery discharger bc 5000 , battery discharger bc 5000 , multimeter fluke 179 , torque wrench 5-35 nm , dc power supply l-3230 , ramp tester ifr-6000 , torque screw driver a402 (0.5- 2.5 nm) , carbon monooxide meter s/n- 211222325 , combination set , combination set 0-360 degree , compass landing (sirs/189/188) , d t i digital gauge 0-10 mm , d t i gauge 0-10 mm , depth gauge 0-150 mm , digital multimeter metravi 19 , digital protactor 0-90 degree , feeler gauge , feeler gauge 0.03-1 mm , force gauge 0-200 lbf , force gauge digital , hi voltage cable tester , hole gauge , micrometer digital 0-25 mm , micrometer external 0-150 mm , micrometer inside 0-1mm , micrometer inside 0-25 mm , pressure gauge 200 psi , pressure gauge , pressure gauge , pressure gauge 0-1000 psi , pressure gauge 0-150 psi , pressure gauge 0-150 psi , pressure gauge 0-250 psi , pressure gauge 0-500 psi , pressure gauge 0-6000 psi , pressure gauge 0-6000 psi , pressure gaugte 0 - 1000 psi- n2 kit , spirit level ts/94/2 (300 mm) , spring balance 0-50 kg , stop watch analog , straight edge , surface plate 18 inchx18 inch , telescopic gauge 12 to 54 mm , torqe screw driver 2-8 nm , torqe screw driver new capri , torque wrench , torque wrench , torque wrench 20-100 lb-ft , torque wrench 2-14 nm , torque wrench 5.6 23.7 nm , torque wrench 5-35 nm , torque wrench 5-35 nm , type pressure gauge digitel 150 psi , tyre pressure gauge 0-12 kg , tyre pressure gauge 0-200psi , pressure gauge 0-250 psi , pressure gauge 17.5 kg (spark plug tester) , volt meter , digital thermohygrometer , digital weighing balance , digital thermohygrometer , air compressor capacity 50 liter , air compressor capacity 50 liter , air compressor capacity 30 liter , air compressor capacity 30 liter , lifting beam (engine sling) , mobile crane with 10 mm wire rope , chain pully with mono rail , chain pully with mono rail , chain pully with mono rail , chain sling 4 leg 8 mm link dia , mobile crane with 12 mm link chain

State Government

CTN :44964335

12 May, 2026 1.34 Crore

Ajmer - Rajasthan

Tender For agarose/horizontal gel electrophoresis , centrifuge high speed refrigerated , , centrifuge tabletop , , co monitor portable , , constant temperature refrigerated bath with water circulatory medium , , digital electronic balance, top pan , , digital combined electrode ph meter , , digital slr camera , , double stage rotary high vacuum pumps , , electrophoresis power supply , , garmin gps , , deep freezer (ultra-low vertical) , , laminar air flow bench (horizontal) , , gel documentation system , , hawke nature treck/night vision binocular , , humidified co2 incubator , , ice flaking machine , , incubator shaker , , laboratory water purification system , , microprocessor based flame photometer , , spectrophotometer, double beam uv-vis with computer attachment and software , , microscope (phase contrast with micro photographic attachment) and image analysis software , , it-enabled podium , , horizontal autoclave 20 x 36 , , multimedia projector , , 03 monitor portable , , photoperiodic castor racks/tissue culture racks , , rotary vacuum evaporator with motorized lifting system , , soil nutrient analyzer , , thermo/thermo graphic camera , , trans illuminator , , vacuum oven , , vertical autoclave-double wall, standard , , vertical electrophoresis system , , vortex mixer , , weather station , , air conditioners 2.0 tons, split , , laboratory purpose refrigerator

Central Government/Public Sector

CTN :44961121

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply testing commissioning and installation of gym equipmenta - axiom dual lat pulldown/low row with luxury trim and double stitched upholstery ph-oplrthe axiom series lat pulldown/low row accommodates two exercises that target the entire back and rear shoulder muscle groups. the clean, inviting look is appealing to all exercisers. frame fully welded 11-gauge steel frames electrostatic powder coat finish for maximum durability tower consistent low profile 53 (135 cm) tower full front (or optional rear only) weight stack shrouds adjustments visible, color contrasting, yellow adjustment handles. latex free rubber over molded adjustment handles. weight plates solid steel 15 lb (7.5 kg) weight plates push / pull increment weight: 7.5 lbs (3.75 kg) top weight plate is fitted with self-lubricated bushings magnetic weight selector pin locks into place biomechanics work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. variable cams & machine design replicate the body s natural strength profileinstructional placards qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language.size (l x w x h): 91 x 50 x 85 metric (cm): 231 x 127 x 216 recommended live area (l x w x h): 115 x 86 x 97 metric (cm): 292 x 218 x 246weight: 452 lbs (205 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg)key features: accommodates two exercises that target the entire back and rear shoulder muscle groups comes standard with lat pulldown bar and neutral grip row handle foot pegs provide additional user stability during row angled thigh pads stabilize users without the need of an additional adjustmentframe colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, hammer strength select standing calf hs-scthe hammer strength select standing calf is a fundamental part of the strength training progression. nine pad height positions accommodate all users, and contoured non-slip foot plates allow users ankles to move in a full range-of-motion. the 22 pieces in the hammer strength select line provide an inviting introduction to hammer strength equipment. dimensions (l x w x h): 58 in x 45 in x 71.5 in (148 cm x 115 cm x 182 cm) weight: 680 lb (309 kg) weight stack weight in kgs: 195frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, hammer strength plate loaded v-squat pl-vsqthe plate-loaded v-squat is designed to have a natural squatting motion, while reducing back and knee strain through a curved arc of motion. it also employs a standard counter balance for lower starting resistance. starting resistance: 54 lbs (24.5 kg) dimensions (l x w x h): 91 in x 42 in x 81 in (232 cm x 107 cm x 206 cm) weight: 530 lb (241 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, signature plate loaded incline press splipthe signature series incline press uses horizontal grips to simulate a more traditional bench press, converging movements for a natural forward pressing motion, and iso-lateral movements for equal strength development. signature series plate-loaded enhances any facility and utilizes independent converging and diverging movements for an instinctively natural experience. dimensions (l x w x h): 50 in x 62 in x 75 in (127 cm x 158 cm x 191 cm) weight: 297 lb (135 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, signature plate loaded decline chest press spldcp dimensions (l x w x h): 51 in x 69 in x 76 in (130 cm x 176 cm x 194 cm) weight: 340 lb (155 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, axiom dual leg extension/leg curl with luxury trim

Counter Balance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

State Government

Central Government And Public Sector

State Government

Central Government/Public Sector