Latest coupled Tenders | Government coupled Tenders

CTN :40031840

07 May, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of volt meter 15 kva , fuel pipe 15 kva , switch toggle 5 kva , engine mounting pad 11 kva , engine mounting pad 15 kva , pad cushioning rubber 7.5 kva , display unit 30 kva , regulator voltage electronic 3.5 kva , e v r 7.5 kva , rubber coupling 7.5 kva , fuel feed pump 7.5 kva , fuel pipe 7.5 kva , oil filter 7.5 kva , door lock 15 kva , air filter 11 kva , fuel filter 11 kva , fuel pipe 11 kva

Central Government/Public Sector

CTN :40026699

21 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of submersible pump set, bee five star rated, isi marked, 500 lpm, 90 mtr head with max od 1 42 mm, submersible cable of length 3 metres, 2900 rpm with coupled motor of capacity 15 hp suitable for operation on 415 v +/- 5%, 3 phase, 50 hz conforming to is: 8034-2002 or latest and also having impeller & bush of brass and metal alloy. make- ksb/amrut/sabar. [ warranty period: 30 months after the date of delivery ]

CTN :39113646

28 Apr, 2025 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of inductively coupled plasma optical emission spectroscopic icp oes equipment

CTN :39342632

25 Apr, 2025 4.67 Crore

Amravati - Maharashtra

Tender For corrigendum : selection of system integrator for supply, establishment, operation and maintenance of center of excellence on digitalization through simulation at government college of engineering ,amravati - hardware part, battery charge and discharge test system, data acquisition and logging system, thermocouple/ rtd for temperature measurement, battery tester for internal resistance testing, electric vehicle bldc motor training system, bldc (brushless) inner rotor brushless dc motor coupled with dc shunt motor to study the load characteristics and study of drive parameters, battery characteristics training system, pmdc motor training system, power and transmission system study models for ev application, pmsm motor coupled with dc generator test bench setup, switched reluctance motor coupled with eddy current dynamometer test bench setup, pwm charge controller training system:, sectioned electric vehicle two-wheeler chassis, sectioned electric vehicle four-wheeler chassis, battery resistance spot welding machine, dc /ac clamp meter, non-contact type tacho meter, computing workstations for ev design and simulation, multi-body dynamics analysis research software bundle for ev (10 user), power train/ gearbox design research software package, 1d+3d thermal modelling, bms modelling, electric motor, ic engine modelling research software package, multi-physics cae research software package with battery modelling and analysis capabilities, nmc cell ( size 18650), nmc cell ( size 26650), lfp cell, smart bms training system, electric vehicle scanner, diy kits for 20 students, advanced driver assisting system (adas) training system for e-mobility, ac ev charger 10kw, dc fast charger: 20kw, multifunction installation tester, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, digital infrared thermometer, digital multifunction meter with vfd, ef-detection & 3-phase rotation, vde approved insulated tool set for ev, electric vehicle safety equipment, ev battery assembly & testing centre setup, ev battery pack cell equalizer, regenerative charging and braking training system, ev assembly disassembly kit, three phase power clamp-on meter with harmonics measurement, digital insulation multi function meter, phase sequence indicator, battery quality anaylyzer with data logger, laptop, hybrid display module, hybrid trainer module motorized, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, computing workstations / pc, engineering simulation software multi-physics cae research software (includes pre-processor and post processor) 10 users, 3d cad package ( 60 user), laptops, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, video conferencing set-up, electromagnetic (em) simulation with circuit design, rf circuits and system design (5g) academic research software :, integrated circuit (ic) design & verification academic research software :, soc development board with software, emc/emi test equipment, spectro radiometer for measurement of the luminous flux, spectrum, color, and color rendering indices of single leds (hand held device), high end computers, 3d printer for prototyping, laptop, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, revolving chair with arm centre pivot mechanism, computer table, white board with stand, revolving office chair with arm centre pivot mechanism for faculty, laboratory wooden table, office table for faculty, major almirah with glass type doors, seminar chairs with desklet, executive office table, executive office chair, sofa set (3+2+1 seater), teapoy/coffee table, visitors chairs with cushion, major almirah, multi function/ all in one printer for office and lab, necessary electrification and networking, matting area with labour work (in sq ft), false ceiling (in sq ft), window sliding door, window curtains with fitting, gypsum plaster with wall putty, wall colori

State Government

CTN :39725748

25 Apr, 2025 NA

Cuttack - Odisha

Tender For corrigendum : cost of amc service for inductively coupled plasma optical emission spectroscopy (icp-oes)

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

State Government

CTN :39996414

21 Apr, 2025 9.91 Lacs

Kharagpur - West Bengal

Tender For supply of different nt water supply materials (sub-mersible pump) for operation & maintenance of water supply for drinking water supply within kharagpur municipal area - supply and delivery of clear water vertical wet type sub merssible pump for bore well confirming to is : 8034 ( and as amended thereaiter ) with standard moc fo. potable clear cold water and bee 3 star rated.capable of discharging noted m3/h. against head of water column. the pump shall be directly coupled with a continuous rated2- pole suitable wet type vertical squinel cage induction motor. conforming to is : 9253 (and as amended thereafter ), suitable for operation in a-c single phases 220y,50hz (category b motor)a) minimum bore well dia-100mm,hp-2.h.p.,no of stage-10,head (h)in metre-62,discharge(q)in m3/hr-5.00,nry size in mm-38, b)minimum bore well dia-100mm,hp-3.h.p.,no of stage-15,head (h)in metre-92,discharge(q)in m3/hr-5.00,nry size in mm-38/50, supply and delivery of clear water vertical wet type sub merssible pump for bore well confirming to is : 8034 ( and as amended thereaiter ) with standard moc fo. potable clear cold water and bee 3 star rated.capable of discharging noted m3/h. against head of water column. the pump shall be directly coupled with a continuous rated2- pole suitable wet type vertical squinel cage induction motor. conforming to is : 9253 (and as amended thereafter ), suitable for operation in a-c three phases 440y,50hz (category b motor)a)minimum bore well dia-150mm,hp-3.h.p.,no of stage-7,head (h)in metre-54,discharge(q)in m3/hr-9.50,nry size in mm-50, b)minimum bore well dia-150mm,hp-5.h.p.,no of stage-5,head (h)in metre-50,discharge(q)in m3/hr-17.00,nry size in mm-50, c)minimum bore well dia-150mm,hp-7.5.h.p.,no of stage-6,head (h)in metre-60,discharge(q)in m3/hr-22,nry size in mm-65, d)minimum bore well dia-150mm,hp-10.h.p.,no of stage-6,head (h)in metre-53,discharge(q)in m3/hr-33.00,nry size in mm-100, gst

CTN :39941909

21 Apr, 2025 90.5 Thousand

Challakere - Karnataka

Tender For corrigendum : procurement of spare parts required for maintenance of drinking water and supply of new motor pumps and panel boards for pagadalabande grama panchayath - gi1.25 pipe (gp hsd), flanzset (gp hsd), novoltcoil (gp hsd), handpump telescopic stand (gp hsd), handpump m10 boltnet (gp hsd), handpumplower valev (gp hsd), handpump chain coupling (gp hsd), hand pump conncting rod (gp hsd), axle pin for hand pump (gp hsd), handcylinder bassem pupm (gp hsd), gi nippal (gp hsd), redy coller (gp hsd), nrv pandy (gp hsd), gi 25mm bend (gp hsd), upvc pipe 3 by 4 (gp hsd), pvc reduce collor 2 inches (gp hsd), pvc service handle 2.75 inches (gp hsd), relay (gp hsd), cable (gp hsd), amps pause 63 (gp hsd), g i nipplas 2 inch (gp hsd), pvc collor 2.5 inch (gp hsd), pvc collor 2 inch (gp hsd), pvc collor 1 inch (gp hsd), pvc bend 2.5 inch (gp hsd), pvc bend 2 inch (gp hsd), pvc bend 1 inch (gp hsd), ams meter (gp hsd), preventer (gp hsd), auto starter (gp hsd), upvc mta (gp hsd), upvc fta (gp hsd), upvc elbow 3 by 4 (gp hsd), upvc bend 3 by 4 (gp hsd), upvc collor 3 by 4 (gp hsd), upvc gums (gp hsd), steel water taps (gp hsd), hp motor 7.5 14 stage pump starters (gp hsd), pvc gum (gp hsd), pvc reduced collor 2.5 inch (gp hsd), g i 2 inch collor elbow bend (gp hsd), g i 2 inch pipe (gp hsd), hp motor 7.5 10 stage pump (gp hsd), elbow 3 inch (gp hsd), elbow 2.5 inch (gp hsd), elbow 2 inch (gp hsd), elbow 1 inch (gp hsd), pvc 3 inch valve (gp hsd), pvc 2.5inch valve (gp hsd), pvc 2 inch valve (gp hsd), pvc 1.5 inch valve (gp hsd), pvc 1 inch valve (gp hsd), pvc 3 inch pipe (gp hsd), pvc 2.5 inch pipe (gp hsd), pvc 2 inch pipe (gp hsd), pvc 1.5 inch pipe (gp hsd), pvc 1 inch pipe (gp hsd), gi1.25 pipe (gp hsd), flanzset (gp hsd), novoltcoil (gp hsd), handpump telescopic stand (gp hsd), handpump m10 boltnet (gp hsd), handpumplower valev (gp hsd), handpump chain coupling (gp hsd), hand pump conncting rod (gp hsd), axle pin for hand pump (gp hsd), handcylinder bassem pupm (gp hsd), gi nippal (gp hsd), redy coller (gp hsd), nrv pandy (gp hsd), gi 25mm bend (gp hsd), upvc pipe 3 by 4 (gp hsd), pvc reduce collor 2 inches (gp hsd), pvc service handle 2.75 inches (gp hsd), relay (gp hsd), cable (gp hsd), amps pause 63 (gp hsd), g i nipplas 2 inch (gp hsd), pvc collor 2.5 inch (gp hsd), pvc collor 2 inch (gp hsd), pvc collor 1 inch (gp hsd), pvc bend 2.5 inch (gp hsd), pvc bend 2 inch (gp hsd), pvc bend 1 inch (gp hsd), ams meter (gp hsd), preventer (gp hsd), auto starter (gp hsd), upvc mta (gp hsd), upvc fta (gp hsd), upvc elbow 3 by 4 (gp hsd), upvc bend 3 by 4 (gp hsd), upvc collor 3 by 4 (gp hsd), upvc gums (gp hsd), steel water taps (gp hsd), hp motor 7.5 14 stage pump starters (gp hsd), pvc gum (gp hsd), pvc reduced collor 2.5 inch (gp hsd), g i 2 inch collor elbow bend (gp hsd), g i 2 inch pipe (gp hsd), hp motor 7.5 10 stage pump (gp hsd), elbow 3 inch (gp hsd), elbow 2.5 inch (gp hsd), elbow 2 inch (gp hsd), elbow 1 inch (gp hsd), pvc 3 inch valve (gp hsd), pvc 2.5inch valve (gp hsd), pvc 2 inch valve (gp hsd), pvc 1.5 inch valve (gp hsd), pvc 1 inch valve (gp hsd), pvc 3 inch pipe (gp hsd), pvc 2.5 inch pipe (gp hsd), pvc 2 inch pipe (gp hsd), pvc 1.5 inch pipe (gp hsd), pvc 1 inch pipe (gp hsd)

CTN :40030973

02 May, 2025 NA

Mumbai - Maharashtra

Tender For procurement and comprehensive annual maintenance of one high pressure liquid chromatograph and four inductively coupled plasma optical emission spectroscope for mpcb

State Government

CTN :40005494

03 May, 2025 25.47 Lacs

Bhavnagar - Gujarat

Tender For supply of various pipes and fittings for stacker-cum-reclaimer a & b at lignite handling plant - bltps. - parallel male stud coupling with nut welding, part no. ge 16 s x 1/2", 2, 7, set, 58, pipe clamp pch 12 pipe size, 6, 100, numbers, 18, pipe clamp pch 28 pipe size, 10, 6, numbers, 20, sae 1 1/2" 6000psi flange without "o" ring groove socket, 14, 4, set, 18, sae split flange 1 1/4" 6000 psi, 18, 5, numbers, 10, seamless tee od 48.3 x 7.1 mm socket weld sch-160, 22, 2, set, 4, swivel elbow with nut welding nipple, part no. se-25-l, 26, 8, set, 4, tee 22l with nut welding nipple,part no. t-22-l, 30, 2, set, 2, tee 25s with nut welding nipple t- 25s, part no. t-25-s, 34, 80, meter, 140, tube od 22 x 2 mm thickness seamless, 38, 50, meter, 12, tube od 48.3 x 7.1 mm thickness seamless sch-160, 42, 6, set, 13, elbow with nut and welding nipple,part no. e-16 s, 46, 15, set, 5, elbow with nut and welding nipple,part no. e- 28 -l, 50, 6

Coupled Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government