Latest coupler plug Tenders | Government coupler plug Tenders

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

CTN :45117801

28 May, 2026 NA

Gonda - Uttar Pradesh

Tender For supply of 13 pin uic coupler, plug assembly consisting of 1.62 meter cable with polyamide hose & uic plug on both ends round type similar to schaltbau make as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev.-2 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45091500

18 May, 2026 NA

Guwahati - Assam

Tender For supply of 16 pin uic coupler plug (circular to rectangular) assembly consisting of approx 3 mtrs cable and polyamide hose with uic plug on both ends and cable as per rdso/pe/ns/ac/0051-2011 rev-2). make for plug similar to schaltbau + harting. make/brand: - pps international, s international, schaltbau, harting orsimilar. hsn code: 86073090 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45056956

12 May, 2026 NA

Valsad - Gujarat

Tender For supply of 13 pin uic coupler plug assembly consists of 1.3 meteres cables and polyamide hose with uic plug on both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev-2. note: uic plug as per clw drawing no-clw/es/3/ sk-4/0047/e similar to schaitbau part no-uic st 13 p eo d2 and polyamideconduit as per rdso specification rdso/ pe/spec /ac-0138-2009 rev-2 or latest [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45037595

20 May, 2026 NA

Secunderabad - Telangana

Tender For supply of 13 pin uic coupler plug assembly with cable, consist of 1.62 meters cable and polyamide hose with uic piug on both ends (type : uic st 13 p eo d2) as per clw spec no. clw/es/3/0047/e alt-e or latest. note : test , guarantee ,warranty certificate to accompany at the time of supply . . [ warranty period: 30 months after the date ofdelivery ]

Central Government/Public Sector

CTN :45012975

07 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of 13 pin uic coupler plug assembly consist of 1.3 mtrs cable and polyamide hose with uic plugon both ends as per rdso modification sheet no. rdso/pe/ms/ac/0051-2011 rev.-2. note-uic plug as per clw drawing no - clw/es/3/sk-4/0047/a similar to schaltbau part no - uic st 13p eo d2 and polyamide conduit as per rdso specification no. rdso/pe/spec/ac-0138-2009 rev-2. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44995535

20 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of centering carrier (end''a'') (sub-assly) to schaku coupler drg.no.- 40-317-13-01(4). as per rdso specn. no.- 61-b-36/rev.68-1 (rev.-2 of february-2025). [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :44982203

05 May, 2026 NA

Gwalior - Madhya Pradesh

Tender For supply of 13 pin uic coupler plug assembly consist of 1.62mtrs cable and polyamide hosewith uic plug on both ends similar( round) make as per rdso modification sheetno.rdso/pe/ms/ac/0051-2011 rev.2 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44980760

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of gauges for schaku coupler with calibration certificate (traceable to nabl certified lab)& traceability certificate as per list below- 1.profile gauge for upper & lower cup sleeve(2ed-181-1149(schaku 40.586.06.01 (4)& 2ed-18101153(schaku(40.624.06-4(3),drg no.-se-g-121 -02 nos. 2. gauge for pin (31.8c11), drg. no.-se-g-120 -02 nos. 3. gauge for allen bolt/screw (2ed-181-1166), drg.no.-se-g-128-02 nos. 4. gauge for fork head 2ed-181-1204(schakudrgno.40-1000.10-6(3), drg. no. - se-g-132-02 no?s 5. gauge for front plate sub assy.2ed-181-1156 (schaku drg.40...586.06.02 (4), drg.no.-se-g-122-02 nos. 6. profile gauge for adjustable cup sleeve/pair of cup sleeve 2ed-181-1074(schaku drg.40.317.13-1 (3), drg. no.se-g-129 -02 nos. 7. gauge for bush upper & lower 2ed-181-1091(schaku drg.40-524.07-3(4) &2ed -181 1089(schaku drg.40-524.-7-4(4), drg.no.-se-g-118 -02 nos. 8. limit gauge for yoke (sub.assy.)2ed-1811183(schaku gr.40.586.06.04 (2), drg. no.-se-g-124 -02nos. 9. snap gauge for bolt 2ed-181-1181(schaku drg.40.586.06.3 (4), drg.no.se- g-126-02nos. 10. snap gauge for bearing bolt 2ed-181-1093(schaku drg.40.586.07.03 (3), drg. no.se-g-119-02 n o s. 11. limit gauge for carrier (sub assy.)& leaf spring compl.sub assy.2ed-181-1200 (schaku drg.40-524.07.03(4) & 2ed-181-1106(schaku drg.40.524.07.08 (20), drg.no.se-g-117-02 no?s 12. limit gauge for rear plate sub assembly 2ed-181-1157(schaku drg.40.586 .06.03 (4) drg.no.se-g-123-02 nos. 13. gauge for articulation bearing 2ed-181-1151(schaku drg.40.sk.1960 (3) drg. no.s-g-127 -02 nos. 14. go gauge for draft gear/draw &buff gear (sub assy.)drg.no.se-g-136-02 no?s qty-02 sets (set of 14 gauges). note: 1) gauge will be made of hard alloy steel. 2) tip or face of gauging profile should be hardened & tempered. 3) supplier should provide manufacturers certificate. 4) material to be supplied in well packed carrying case. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44977653

01 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - 98080106(15) cond.& u/s cbc coupler bodies, base plates, coupler ends, knuckle, draft gear housing, end tubes, adjustable cup sleeve, tragger carrier, coupler end a and b, intermediate tubes, fork eye, lock for cbc, clevis, yokes, schaku bracket, front support and coupler parts, alternator shafts etc., of sorts and sizes, full or broken, with or without attachments of rubber and nylon. note: delivery on actual weighment basis only. hsn code:72044900 gst@18% on forward charge basis. location: ferrous yard, bin no: w-6.

Coupler Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors