Latest coupler plate Tenders | Government coupler plate Tenders

Central Government/Public Sector

CTN :41053846

23 Jul, 2025 NA

Kota - Rajasthan

Tender For supply of insulation sets for ground connection, made of nylon-66 for 220mm throw thickwe b switch point machine, as per specification no. irs.s.40/84 or latest. one set consisting material of :- (1) i nsulating washer drg. no.-s-8640 = 12 nos. (2) insulating washer drg. no.- s-8640/1=04 nos. (3) insulatin g washer drg. no.-s-8640/2=02 nos. (4) insulating bush drg. no.-s-23199=10 nos. (5) insulating bush drg. no.-s-3463=01 no. (6) insulating bush drg. no.-s-22179=02 nos. (7) insulating bush drg. no.-s-8912=02 nos. (8) insulating plate drg. no.-s-3404=02 nos. (9) insulating bush drg. no.-s-8813=04 nos. make/ bran d :- ets , or similiar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41053898

16 Jul, 2025 NA

Jabalpur - Madhya Pradesh

Tender For fabrication and supply of cover point machine p bracket antitheft cover with antitheft nuts & cover (p bracket cover plate assembly set (cover plate lh: 01 nos, cover plate rh: 01 nos, anti theft nut: 0 4 nos,anti theft bolt :04 nos,spacer: 04 nos, washer : 04 nos). approval of material sample should be taken from consignee before bulk supply. material should supply at consignee depot sse/s/m/jbp . inspection age ncy- consignee. this item is not available in gem . [ warranty period: 30 months after the date of deliver y ]

Central Government/Public Sector

CTN :41054241

12 Aug, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of 25 kw brushless alternator (excluding electronic rectifier cum regulator unit or rectifie r cum regulator unit) confirming to rdso specification no. rdso/pe/spec/ ac/0056-2014 rev.1 along with other accessories shall be supplied as per clause no. 1.3 of the specification. the suspension ha nger pin with split cotter and washer shall be as per rdso drg. no. skel 3943 (rev.2) 2016, alt-1 and indicator plate of belt tensioning device shall be cut to 250 mm length. icf approved makes of (1) ic e lectricals company pvt. ltd. new delhi (2) hmtd mumbai (3) kel kundara (4) p.d steels mohali (5) pre sstech india pvt. ltd.mumbai (6) stesalit baddi are only acceptable [ warranty period: 30 months aft er the date of delivery ]

Central Government/Public Sector

CTN :41056880

22 Jul, 2025 NA

Multi City - Multi State

Tender For supply of compressor crank shaft with bearing, con rod with nut, washer, lock plate t o elgi cat no. 070301130 for 700hp demu/dpc [ warranty period: 30 months after the date of deliv ery ]

Central Government/Public Sector

CTN :40692767

19 Jul, 2025 NA

Mandal - Gujarat

Tender For corrigendum : supply of warman pump spares > - model: 1.5/1 bah, metal/ rubber /expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, gland ( 2 piece), lantern ring, volute frame seal, frame plate, volute liner, discharge joint ring, impeller o ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), frame plate liner insert, impeller, cover plate bolt& nut (1 set consists of 4 nos), cover plate, intake joint ring, gland clamp bolt (1 set consists of 2nos), gland bolt, nut & washer (1 set consists of 2nos), gland packing (1 set consists of 2 nos), neck ring, expeller, expeller ring, seal ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), end cover set screw (1 set consists of 8 nos), shim set, piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner, frame plate stud & nut, frame plate liner, cover plate bolt& nut, model: 3/2 cah, metal/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve, frame plate liner insert stud (1 set consists of 4 nos), seal ring, volute frame seal, impeller, discharge joint ring, volute liner, cover plate, intake joint ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), frame plate liner insert, frame plate, impeller o ring, grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, expeller, expeller ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner stud (1 set consists of 4 nos), cover plate liner (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), frame plate liner, model: 4/3 dah, rubber/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, frame plate liner stud (1 set consists of 4 nos), frame plate liner, frame plate, impeller (normal), cover plate liner, cover plate, cover plate liner stud (1 set consists of 4 nos), adjusting screw, nut & washer (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), impeller o ring, cover plate bolt& nut (1 set consists of 4 nos), shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, gland clamp bolt (1 set consists of 2 nos), frame plate liner insert, seal ring, impeller (trimmed), volute liner, volute frame seal, frame plate liner insert stud (1 set consists of 4 nos), discharge joint ring, keeper plate, intake joint ring, expeller, expeller ring, model: 6/4 eah, metal/ gland seal, bearing assembly, clamp washer, clamp bolt-1 nut, shaft sleeve o ring, shaft sleeve, frame plate liner insert stud -1 thin self lock nut, seal ring, volute liner seal, impeller, frame plate, discharge joint ring, volute liner, throat bush, cover plate, cotter, intake joint ring, adjusting screw -3 thin nuts -2 washers, base, frame plate liner insert, impeller o ring, cover plate bolt -2 nuts, packing, gland ( 2 piece), gland bol

Central Government/Public Sector

CTN :40939593

19 Jul, 2025 1.04 Crore

Sundergarh - Odisha

Tender For corrigendum : supply of joy stick for travel ste l ksm777000 , hyd pressure sensor 160 bar , hyd pressure sensor 400 bar , slope sensor 8deg , slope sensor 12deg , blind spot mirror , manifold belt tension , loop flush valve , ground control box , friction disc for clutch , clutch seal kit , pressure spring clutch , spring dished clutch , rexroth traction module , nrv lube oil pump , lub oil pump for pto223303403 , implement pump , air precleaner , differential valve assy , travel enable valve assly , control panel assly , rc kit , air intake pipe kit , connection exhaust kit , cable and accessories kit , hydraulic hose kit , hydraulic fitting and accessories kit , implement block assly , pilot block assly , ring hose bracket key , ring key bolt , rear cover , hose spiral for track hose , emergency push button station , grease connector , lock nut and washer , filter , drive pulley , belt tensioner pulley , m by c electrical kit 1 , connector pressure sensor 160 bar , o mount , grease hose , hyd oil level switch , track gearbox assy , cover plate mounting screw , mdgb 1st stage reduction assy , milling drum gear box main bearing , face seal , mdgb o ring set , mdgb fastener , radiator coolant pipe set

Central Government And Public Sector

CTN :41056855

22 Jul, 2025 NA

Bangalore - Karnataka

Tender For sensor assembly for brinell hardness testing machine in cleaning room consisting of following items. 1. load flange screws & ball retainer as per rwf drawing no. 703710110010 - qty- 01 set. 2. m-3 x 6 mm long screws- qty - 02 nos. 3. body as per rwf drawing no.703710110040 - qty - 01 no. 4. m-4 x 10 mm long socket head cap screw - 06 nos. 5. flange as per rwf drawing no. 703710110050 - qty- 01 no. 6. main spring as per rwf drawing no. 703710110070 - qty- 01 no. 7. measuring plate as per rwf drawing n o. 703710110080 - qty- 01 no. 8. washer as per rwf drawing no. 703710110090. qty - 01 no. 9. slug rod assembly (consisting of slug rod pilot, spring & eyelets 1 no. each) as per rwf drawing no. 703710110100. qty - 01 set. 10. adjustment screw as per rwf drawing no. 703710110110 qty - 01 no. 11. ball seat as pe r rwf drawing no. 703710110020. qty - 01 no. 12. sensor pin as per rwf drawing no.703710110030. qty - 03 nos. 13. coil holder as per rwf drawing no. 703710110060. qty - 01 no. note: 1. the sensor assembl y shall be supplied in assembled condition. 2. one sample in assembled condition shall be supplied to rwf for inspection before bulk manufacturing. 3.material test certificate from nabl accredited laboratory shall f ollow the supply. 4. the item supplied shall be guaranteed for a period of 18 months from the date of suppl y. 5. all the items are machined in cnc machines. [ warranty period: 18 months after the date of delivery ]

CTN :41055740

02 Aug, 2025 NA

Dehradun - Uttarakhand

Tender For supply of ccs 6.5 mm titanium with washer , lcp proximal lateral tibia 05 hole see attach the file pl. , lcp proximal lateral tibia 07 hole see attach the file pl. , adjustable flexible loop size 50 mm , lcp distal humerus locking plate see the attach file pl.

CTN :41054286

23 Jul, 2025 NA

Sonitpur - Assam

Tender For supply of fuel pump assy genr set 3 point 5 kva , piston assy genr set 3 point 5 kva , piston ring set genr set 3 point 5 kva , big end cell genr set 3 point 5 kva , governor plate genr set 3 point 5 kva , fuel filter genr set 3 point 5 kva , air filter genr set 3 point 5 kva , head gasket genr set 3 point 5 kva , piston assy with pin genr set 40 kva , piston ring set genr set 40 kva , liner sleeve genr set 40 kva , sleeve o ring genr set 40 kva , o ring set genr set 40 kva , housing bolt genr set 40 kva , main bearing genr set 40 kva , cr bearing genr set 40 kva , thrust washer genr set 40 kva , timing oil seal genr set 40 kva , real oil seal genr set 40 kva , engine gasket set genr set 40 kva , cyl head gasket genr set 40 kva , oil filter genr set 40 kva , diesel filter genr set 40 kva , stop solonoide genr set 40 kva , main bearing cap genr set 40 kva , v belt genr set 40 kva , oil cooler genr set 40 kva , oil pump assy genr set 40 kva , cam shaft brush genr set 40 kva , anabond genr set 40 kva , connecting rod genr set 40 kva , repair work genr set 40 kva , avr plate genr set 40 kva , rotary pump overhauling genr set 30 kva , oil filter genr set 30 kva , fuel filter genr set 30 kva , air filter genr set 30 kva , fan belt genr set 30 kva , oil filter genr set 15 kva , fuel filter genr set 15 kva , air filter genr set 15 kva , oil filter genr set 7 point 5 kva , fuel filter 7 point 5 kva , air filter 7 point 5 kva , fan belt 7 point 5 kva , fuel filter genr set 40 kva , air filter genr set 40 kva , fan belt genr set 40 kva

CTN :41056545

21 Jul, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of universal joint assy cat part no 116 uj 02017 , screen cat part no 116 mc 92592 , brake band cat part no 116 mc 92551 , hub cat part no 116 mc 51387 , disc cat part no 110 mc 02019 , plate pressure cat part no 116 mc 41391 , seal oil cat part no chs 07 10085 , gasket cat part no 116 mc 71889 , lever gear shift cat part no 116 co 02071 , lever cat part no 116 co 02088 , bolt cat part no cfs 01 31035 , washer spring cat part no cfw 01 11030 , key cat part no cfk 02 00522 , seal oil cat part no chs 07 00032 , shaft cat part no 116 tm 12157 , seal oil cat part no chs 07 00030 , seal ring assy cat part no 125 fd 02038 , seal ring assy cat part no 116 fd 02111 , bolt adjustment cat part no 116 br 11336 , spring cat part no 116 co 12075 , screen cat part no 116 ps 91133 , magnet cat part no 116 ps 02024 , element filter cat part no 524300450001 , o ring cat part no chs 01 15070 , seal cat part no 116 tf 71552 , gasket cat part no 116 tf 71852 , seat assy cat part no 110 05 02082 , rest arm cat part no 504303000006 , element filter cat part no 116 hs 91784 , hose hydraulic cat part no 116 ph 91655 , spanner 36 into 14 d into e cat part no 520900000420 , element inner cat part no 31z1280139 , element outer cat part no 31z1280155 , cartridge oil filter cat part no 31z5180433 ks , cartridge fuel filter cat part no 41z7181537 ks , cartridge cat part no 11z7180235 ks , water separator cat part no 30z7181024 , stop cable cat part no 30z7101871 ) /bid number : gem/2025/b/6435998 * /dated: 11-07-2025 & & / bid document 1 / 30

Coupler Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector