Get complete information related to latest Coupling Capacitor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Coupling Capacitor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Coupling Capacitor Tenders.
Tender For supply of 1 kvar metalized polypropylene gas filled,wavy cut three phase self healin g type capacitors. rated at 480v, 50hz, rated current 1.2 amps capacitor should have di scharge resister- e and over pressure disconnection. as per rdso modification sheet n o. rdso/pe/ms/ac/0054-2014 rev-1 and confirming to is: 13340 with isi mark. suitable for c apacitor bank of lhb ac coach. make: m/s epcos or m/s vishay or any other equivalent ca pacitor confirming to is: 13340 with isi mark and having property as defined in table-1 a ccording to rdso/pe/ms/ac/0054-2011 (rev.0). [ warranty period: 30 months after the date of d elivery ]
Tender For blower motor unit (without outer case) for electrical chimney suitable for lhb pantry car, imp eller & motor dynamically balanced & ready to use having following technical specification, type of blower: centrifugal single inlet single width blower, size 7 inch x 3.5 inch, motor type: external rotor, supply- 230 v ac, 0.9a, 160w, 1400 rpm, air volume 600 cmh, capacitor 6.3 mfd, class f insulation, forward curve impel ler. material shall be southern magnetic or rotech or sem. material shall procure from said oem or his auth orized dealers or submit proof of purchase from oem. [ warranty period: 30 months after the date of deli very ]
Tender For supply of isi marked propeller type ventilating fans(exhaust fans)4-pole,450mm suitable for single phase ac 230 volts,50hz,capacitor run,confirming tois:2312/1967 (reaffirmed2005),complete with mounting ring with four number fixing holes,without regulator and lou ver shuters. capacitor shall be isi marked and duly type tested.specification for accessories for propeller type ventilating fans(exha ust fans) shall be as per general technical requirements. spec:is 2312-1967 or [ warranty period: 30 months after the date of delivery ]
Tender For supply of following items for setting up measurement and instrumentation lab for 4 year b.tech in electrical engineering curriculum and application for university of calcutta. - experimental set-up for calibration of a wattmeter using dc potentiometer with following features/items:regulated power supply 2 volts, 100 ma to operate the potentiometer.calibrated electronic standard cell voltage 1.0186 volts.regulated power supply 0-5 volts/0.5 amps with milliammeter 0- 500ma for current coil of wattmeter.regulated high voltage power supply 0-250 dc volts with voltmeter 0-250 volts for pressure coil of wattmeter.a panel mounting wattmeter 0-125 watt is required to perform the experimentgalvanometer for null balance.a volt ratio box for measurement of higher voltage.complete circuit diagram with wattmeter connections to be provided on the front panel of the instrument.with standard accessories, experimental set-up for low resistance measurement using kelvin s double bridge with following features:range: 0.2 micro ohm to 11 ohms, with an accuracy of 0.05 %required accessories:spot reflecting galvanometer. dc source 10 a with one analog current meter. attachment of 1 meter length.brass clamp with terminals for zero setting. with standard accessories, experimental set up for unknown capacitance measurement using de-sauty s bridge with following specifications:source: sine wave signal of 1khz. the amplitude of ac switch indicating lamp is provided on the bakelite board. two sockets are to be provided for the output of ac signals.detector: for detecting small ac signals in the output, null detector is required as in-built with digital display.circuit diagram:the circuit layout on the board is to be provided out to facilitate convenient working. 4 or 5 mm socket required for making connection. features:r2 --- three decade resistance dials having value 10 1000, 10 100 and 10 10 ohmsr1 ---- single decade resistance dial having value 10 100 ohmsc1 ---- unknown capacitor.c2 ---- two fixed standard capacitors having value 0.01mfd 0.1mfd (loss free)with standard accessories, experimental set-up for calibration of a 1-phase watt-hour meter with following scopes: to adjust & calibrate a single-phase energy meter by direct loading method to adjust & calibrate a single-phase energy meter by comparing with a sub-standard meterspecifications: static energy meter single phase: under test (local) duly mounted, wired and terminated static energy meter single phase: sub-standard meter (isi mark) duly mounted, wired and terminated voltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v ac ammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a ac wattmeter: dynamometer type ac single phase, multi-range with current coil 5 / 10 amp and potential coil 75 / 150 / 300 v ac variac: variable voltage transformer (portable table / floor mounting type with enclosure) input: 230v ac and output: 0 270v / 8 amp ac variable load: made up of 3 load resistors of 70 ohms / 700 w each duly mounted and connected / terminated to form different loads (35 to 210 ohms) as per external connections digital stop clock: portable with start / stop & reset operation set of necessary 4 mm spring loaded patch cords for interconnections detailed instruction manual supply to be connected: 230v, 1phase, 50 hz, ac mains, experimental set-up for calibration of a 3-phase watt hour meter with following specifications: to adjust & calibrate a three-phase energy meter by direct loading method to adjust & calibrate a three-phase energy meter by comparing with a sub-standard meterspecifications:static energy meter three phase: under test (local) duly mounted, wired and terminatedstatic energy meter three phase: sub-standard meter (isi mark) duly mounted, wired and terminatedvoltmeter: moving iron ac portable of class 1.0 accuracy and range 0 - 300 v acammeter: moving iron ac portable of class 1.0 accuracy and range 0 - 10 a acwattmeter:
Tender For supply of orient bldc type electrical 400mm bracket mounted fan for wall mounting, wall mounting fans, oscillating type sweep 400mm, sophisticated, elegant looks, plastic blades, pull' cords for speed regulating/remote controlling. bracket mountain, semi rigid, non capacitor type, colo urs white blades white colours. it shall be suitable to work on 230v, ac, 50hz, ac single phase supply , rated power 28w, or near, ip21, motor type ac with copper winding and pcb controller board, regul ator class-i speed control by remote/mechanism-pull cords or remote bass control speed steps 0 to 5, length of power cord- 2 mtrs rated air delivered 65 cu.mt/min. or above, rated speed 1000 to 1500 rp m. is;555 or latest acceptable makes: orient, havells, automberg, philips,crompton etc.. it should be guaranteed as per the irs conditions. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5),led luminaire (recessed luminaire) (v3) conforming to is 10322 (part 5/section 2),led luminaire (recessed luminaire) (v3) conforming to is 10322 (part 5/section 2),led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5),led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5),fixed capacitors (fixed capacitor for single phase ac electric fan) as per is 1709:1984,fixed capacitors (fixed capacitor for single phase ac electric fan) as per is 1709:1984,soap dish - case
Tender For corrigendum : custom bid for services - annual maintenance contract for maintenance of rac equipments panel ac qty-84 nos installed at various sections of of dc as per scope of work no ofdc-es12-rac-panel ac-01 dt 28-01-2025-amc for rac equipments (panel ac, qty. 84 nos) installed at various section of ofdc 1. the firm has to undertake periodic maintenance along with breakdown rectification of following equipment installed at various locations in side ofdc premises. sl. no 01, machine, location, capacity, nos. of unit, description panel ac, various machine at ofdc, 0.18-1.68 kw, 84 2. the firm has to carry out the preventive maintenance quarterly for each equipment as per check list approved by es section which shall include but not be limited to the following activities, a. cleaning of filters., b. checking of evaporator/condensing coil., c. checking of refrigerant pressure (suction and discharge)., d. checking compressor intake current., 3. the brake down maintenance of the equipment shall be include but not be limited to the following a) supply and replacement of faulty spares including the following but not limited to refrigerant compressor., blower., starting and running capacitor., timer and contractor., strainer and contractor., cooling and condensing coils., hose pipes., copper tube., refrigerant gases..
Tender For supply of 1kvar metalized polypropylene gas filled wavycut 3 phase self healing type capacitors rated at 480v, 50 hz capacitor should have discharge resistor and over pressure disconnection as per rdso modification sheet no. rdso/pe/ms/ac-0054-2011 rev-0 and confirming to is: 13340 suitable for capacitor bank lhb ac coach. spec: rdso modification sheet no. rdso/pe/ms/0054-2011 rev-0 and confirming to is: 13340. (make and model should be m/s epcos and m/s vishay or any other equivalent capacitor confirming to is: 13340)