Latest coupling fitting Tenders | Government coupling fitting Tenders

State Government

CTN :40584717

24 Jun, 2025 NA

Harda - Madhya Pradesh

Tender For online tender for plumbing sanitary item - , water tank isi double layer 200 lit, water tank isi double layer 500 lit, water tank isi double layer 1000lit, water tank isi double layer 2000lit, upvc pipe 1/2 inch, upvc pipe 3/4 inch, upvc pipe 1 inch, upvc pipe 2 inch, pvc drain pipe 2 inch, pvc drain pipe 4 inch, upvc socket 1/2 inch, upvc socket 3/4 inch, upvc socket 1 inch, upvc socket 2 inch, upvc socket 2 inch, upvc elbow 1/2 inch, upvc elbow 3/4 inch, upvc elbow 1 inch, upvc elbow 2 inch, upvc tee 1/2 inch, upvc tee 3/4 inch, upvc tee 1 inch, upvc tee 2 inch, upvc coupling 1/2 inch, upvc coupling 3/4 inch, upvc coupling 1 inch, upvc coupling 2 inch, upvc union 1/2 inch, upvc union 3/4 inch, upvc union 1 inch, upvc union 2 inch, upvc ball valve 1/2 inch, upvc ball valve 3/4 inch, upvc ball valve 1 inch, upvc ball valve 2 inch, upvc tank nipple 1/2 inch, upvc tank nipple 3/4 inch, upvc tank nipple 1 inch, upvc tank nipple 2 inch, upvc brass tee 1/2 inch, upvc brass tee 3/4 inch, upvc brass tee 1 inch, upvc brass tee 2 inch, indian toilet seat 21 inch, indian toilet seat 23 inch, western toilet seat, close coupled and one piece pedestal western seat, cistern (plastic), wasbasin (ceramic/vitreous), stainless steel sink, brass handel valve 1/2 inch, brass handel valve 1 inch

Central Government/Public Sector

CTN :40605064

25 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of quick coupling arrangement for brake van type 'bvzc' drg no. wd-91101/s-0 5, alt-5, or latest spec. appendix 'n' of 02-abr-2002, amendment no.3 of apr'10 wd-91101-s- 05, alt.-or latest item no. 01 to 14. spec: [ warranty period: 30 months after the date of delive ry ]

corporations/Associations/Others

CTN :40582830

02 Jul, 2025 NA

Bokaro - Jharkhand

Tender For supply of nozzle for air washer (part no-9),1 set=16 nos. - air washer assy.drg.no.25p04-t-2b-291 , adopter b/b below wetting unit - collecotr tank drg no 25p04-t-1b280 , sleeve coupling set having mark 219a consisting of(a)flange02ns,(b)aligning ring(l-200)-02 nos., 10 mm aligning screw01no, bolts,nuts,& washer(m16x290)-o6 nos(d)rubber gasket(219a)-02 nos. as per drg,no.mt/o&m/ms-sk-11&12 for 200 nbpipe spares for ahp , nut noisting (pt.no-3)slurry pump , bearing housing for bottom ash clinker grinde , flange, mark 222a for nb ms pipe, is-3589 (pipe to fitting/fittingto fitting) & for 2nb ci pipe, is-1536 (pipe to pipe) for b.a. disposalline coupling fitting , pivot ball assy. 4 inch vent equalizing valve , fly ash header valve (tersg) 8" drg no-25p04-t-1b-040 (r-1) gate -tersg for 8'' bs-1211, cl-d pipe (with replaceable seat & casingguard)

Co-operative

CTN :40590432

18 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c i item on conversion and supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), chief engineer

State Government

CTN :40534123

09 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For corrigendum : supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) ma

CTN :40604991

07 Jul, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of rubber seal of coupling flex 1 inch as per drg.no. d17282238 (item-3) alt d [ wa rranty period: 30 months after the date of delivery ]

CTN :40603894

30 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of snap head rivet of screw coupling to drg no rdso sk 99001 alt 4 item no 8, size dia 8mm x 90mm long. [ warranty period: 30 months after the date of delivery ]

CTN :40604452

26 Jun, 2025 NA

Kharagpur - West Bengal

Tender For supply of hose coupling for feed pipe of icf coaches. drawing no.: rdso's drg. no. wd-81027-s-0 1, alt. 14, item nos. 1 to 7 in assembled condition. material and specification: rdso's str no. 02-abr - 2002, amendment 4 / sept. 2016, appendix - f. [ warranty period: 36 months after the date of delive ry ]

CTN :40584899

21 Jun, 2025 6.00 Lacs

Ratlam - Madhya Pradesh

Tender For plumbering item district hospital 2025-26 - snuip head, c.p nipple (1'), hand saver 1/2', false tank button single vale peripherals angle cock, connection pipe 1/2' (3mm), waste pipe, taperol tape, basin veysor aluminium full size a spandle vase, false tank rear fitting, connection pipe 1/2' (2mm), urinal waste pipe (3mm), c.p nipple (6'), c.p. nipple (1/2), float valve periware a basing key waste coupling, can of tank periware a lab key tap pillar cock full size a pillar cock for mixer wall spandle inside mixer valve jaguar a for kitchen basin waste coupling of kitchen basin, push cock of urinal for hand shower stand periware a concealed wall jaguar a to a bib cock tap 1/2, x nipple 1/2, cp nipple 2, cp nipple 4, ji pipe 1/2 (10 mm), ppr k gate wall (63 mm), ppr k gate wall (50 mm), ppr k gate wall (40 mm), pvc pipe (110mm) 10 mm pvc pipe (75mm) 10 mm pvc pipe (63mm) 10 mm pvc pipe (50mm) 10 mm pvc pipe (40mm) 10 mm pvc anti (110x75mm), pvc y (75mm), pvc y (110mm), pvc elbow (110mm), pvc bend (110mm), pvc bend (75mm), pvc elbow (75mm), pvc socket (110mm), pvc socket (75mm), subtle clip (110mm), subtle clip (75mm), subtle clip (63mm), subtle clip (50mm), subtle clip (40mm), c pvc pipe (1') 10mm, c pvc elbow (1'), socket cpvc (1'), c pvc tee (1'), c pvc reducer (1x1/2'), c pvc tee (1x1/2'), c pvc pipe (1/2') 10mm, c pvc elbow (1/2'), socket c pvc (1/2'), brass elbow (1/2'), c pvc mta (1/2'), c pvc fta (1/2'), c pvc mta (1'), cpvc fta 1'', cpvc solvent 180'', pvc solvent 180'', steel clip (1''), steel clip (1/2''), plain taps (1/2''), cpvc valve (1/2''), cpvc valve (1''), mixer valve fittings pvc end cape (110mm), pvc end cape (75mm), to a angle cock, push cock tap (1/2''), new lisbon tank double button parts, waste pipe, waste pipe connector, basin tap nuts, wash basin complete big ones, fasteners, saw blades, bombay keel (3''), bombay keel (2''), bombay shell (1x1/2'), pipe wrench big (1'.4'), pipe wrench medium (1'.2'), upvc pipe (1') (10 mm), upvc socket (1'), upvc elbow (1'), upvc tee (1'), upvc mta brass (1'), upvc fta brass (1'), upvc reducer (1x1/2'), upvc pipe (1/2') (10 mm), upvc mta brass (1/2'), upvc fta brass (1/2), upvc t (1/2), upvc socket (1/2), upvc elbow (1/2'), upv c brass elbow (1/2'), upv c solvent blue 180um s, drainage ss mesh (6x6), drainage ss mesh with hole (6x6), m sill half & shower gun, urinal jeep, mixer wall, shower, european type, ceramic parts of taps 40 m upvc pipe, ceramic parts of taps 40 m upvc socket, ceramic parts of taps 40 m upvc elbow, ceramic parts of taps 40 m upvc ta hand power pvc a hand power half inch pipe 1 meter in, la tech spare lutwall, angle wall half inch in brass, lut wall 1'' in brass, half inch upvc & cap 1'' inch upvc & cap 1'' upvc ball wall, half inch upvc ball wall, half inch brass ball wall, pvc 110 mm ta pvc 110 mm elbow pvc 110 mm socket, pvc 110 mm saddle leaf, pvc 75 mm ta pvc 75 mm elbow pvc 75 mm socket, pvc 63 mm ta pvc 63 mm elbow pvc 63 mm socket, pvc 40 mm ta pvc 40 mm elbow, pvc 40mm socket, pvc 40mm fta 1'' inch upvc syntex connection nipple joint, half inch upvc syntex connection nipple joint, half inch gi nipple 3''a half inch gi nipple 4''a half inch gi nipple 6''a half inch gi nipple 1 feet, half inch gi nipple 2 feet, half inch gi nipple 3 feet, half inch gi socket, half inch gi elbow, 1'' brass tap, half inch plain tap, half inch elbow taped wipe carg tap, half inch elbow taped pillar carg tap

CTN :40604805

17 Jun, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of "screw coupling assembly (enhanced) to drawing number: icf/sk-2-3-010 alt 'u' col.iii & rdso spec. c-9505 (revised), amd slip no. 1 special condition: 1) packing instru ction: a) all screw couplings and/or spares, after acceptance, shall be painted with on e coat of boiled linseed oil to is: 77 and packed securely in rigid cases ensuring that ea ch case does not weigh more than 750 kg. alternatively, to be packed securely in doubl e gunny bag. the thread of the screw shall be given additional rigid protection. b) pack ing instructions traceability details such as manufacturers name, month & year of supp ly shall be necessarily provided on the components as specified in the relevant drawin gs, failing which item shall be rejected by the inspecting authority. 2) firm shall confir m and obtain the exact drawings to be followed from mcf/raebareli before start of m anufacturing. [safety item ]

Coupling Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Co-operative

State Government