Latest crane spare Tenders | Government crane spare Tenders

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

Central Government/Public Sector

CTN :45054958

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98210178. condemned and unserviceable copper under ground cable such as signal / tele communication / power cables and similar cables with / without ferrous armoured , aluminium , rubber and other original attachments of sorts and sizes. as is where is basis . cssd / goc electronic weigh bridge to be used for weighment . note: 1) special attention is invited to para 12.0 of instructions to purchasers for participating in e- auction and special terms and conditions of southern railway and general conditions relating to the auction sale of railway materials through e- auction. (2)purchaser should submit valid pcb certificate and pass book at the time of delivery.(3) loading by crane / jcb permitted.

Central Government/Public Sector

CTN :45054960

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98217008. condmened and unserviceable rubber / pvc insulated copper cables consisting of carbody power cables of traction motors , inter cell connecting cables , grid connection cables , radiator fan connection cables, power control cables, outgoing cables, interconnection cables of traction motors , welding cables and similar copper cables of sorts and sizes with / without end terminals and extra insulation. as is where is basis. segregation and removal of attachments not permitted. cssd / goc electronic weigh bridge to be used for weighment note: (1) special attention is invited to para 12.0 of instructions to purchasers for participating in e- auction and special terms and conditions of southern railway and general conditions relating to the auction sale of railway materials through e- auction. (2) purchaser should submit valid pcb certificate and pass book at the time of delivery.(3) loading by crane/jcb is permitted .

Central Government/Public Sector

CTN :45034502

09 May, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of crane spares - contactor mnx 18 , add on block 2no 2nc mnx a1 , auxiliary contactor mx 0 , fuse base 32 amps , fuse carrier 32 amps , blade tag cartridge fuse 5 amps , blade tag cartridge fuse 10 amps , blade tag cartridge fuse 20 amps

Corporations / Associations / Others

CTN :44962057

21 May, 2026 41.84 Lacs

Multi City - Karnataka

Tender For trimming or pruning of different types of tree branches along sides of metro railway viaduct which is likely to infringe the metro lines, from whitefield to challaghatta metro station. tree branches to be cut up to a minimum of 03 meters away from viaduct by using hydraulic crane of 60 feet height including skilled labour to clear and carry all cut tree branches, debris etc., by using vehicle and to be disposed away from road or metro premises, safety ppes, lighting arrangements etc. all inclusive as per instructions of engineer in-charge. inclusive of deployment of traffic marshals and all other safety aspects, obtaining traffic police permission lighting arrangement for night work for each location etc.

Central Government/Public Sector

CTN :45019328

06 May, 2026 NA

Tambaram - Tamil Nadu

Tender For auction sale of pway scrap - 1)condemned u/s cl.iii weighment rails - 1)cms crossing 52 kg - 2 nos, 2)check rail 52 kg - 5 nos, 3)tongue rail 52 kg - 6 nos, 4)glued joint 52 kg - 14 nos. quantity - 10.631 mts. ds8 no.932038 dt.12-01-2026. location - at tambaram yard, back side of rri cabin and opposite to railway quarters no. 412a and 417. 2)a)cms crossing(52kg/60kg) - 11 nos, b)check rail (52kg/60kg) - 21 nos, c)tongue rail (52kg/60kg) - 22 nos, d)glued joint (52kg/60kg) - 31 nos. quantity - 35.731 mts. ds8 n0. 932035 dt. 12.01.26. location - at tambaram yard - km tbm/1054 - tbm/f33. total quantity - 46.362 mt. note- 1]delivery to be made on actual weighment basis. 2]when crane loading is not possible, the purchaser [by engaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150 kgs. 3] in case of excess on weighment of loaded lorry, purchaser [by engaging his own labourers/vehicle] has to cut/unload the excess quantity , handover the same to the custodian on a separate vehicle to the actual location or near to the weigh bridge as per the direction of custodian. 4)any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions. 5)any clarification in location/ ds8 no & date - udm ds8/manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 6) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of do , ds8s, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 7)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.

Central Government/Public Sector

CTN :45031646

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)cr bcnam1 30019334216 - rc items:-1.wheel set complete with axle, axle box roller bearing complete set, 2. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 3.yoke pin, and 4.side bearer top plate, 2)se boxnr 25079860775 - 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 3)se boxnr 25079762734 - 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)cr bcnam1 30019363087 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sr bcnm1 30069032452 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)sc boxnr 25099660355 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 5.side bearer top plate, 7)se boxnm1 10079561586 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate = 7 wagons. ds8 no:023310-25-24103 dt: 27.02.2026. location: jtj yard. custodian: sse - c and w - jtj. remarks: wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept seperately except for sl no1. cr bcnam1 30019334216. pl.no. 98110159. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :45031647

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)nr bfkn 98039011289 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 2)cncr bfkhn 98259060111 - rc items:-1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, and 3.side bearer top plate, 3)nr bcnm1 30039016369 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)sc bcnm1 30099060029 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sc boxnm1 10099628030 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)se boxnrm1 25079661808 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 7)se boxnr 25079711749 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate= 7 wagons. ds8 no:023310-25-24105 dt: 27.02.2026. location: jtj yard. custodian: sse - c and w - jtj. remarks: wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside except for wagon sl no 2) cncr bfkhn 98259060111. pl.no. 98110159. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :45031648

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)se boxnm1 10079745313-rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke vn side only, 4.yoke pin, and 5.side bearer top plate, 2)sc boxnr 25099661871-rc items:-1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, 3.side bearer top plate, 3)se boxnr 25079663062-rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, 4.side bearer top plate,4)er bobrnm1 72029578457-rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin 5)sc bcnm1 30099060784- rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, 4.side bearer top plate, 6)sc bcnm1 30099032705-rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 7)cncr bfkhn 98259011625-rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box rollerbearing complete set, 3.yoke pin= 7 wagons. ds8 no:023310-25-24065 dt: 27.02.2026. location: jtj yard. custodian: sse - c and w - jtj. remarks: wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside. pl.no. 98110159. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :45031649

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)sr bcnm1 30069032384 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, 4.side bearer top plate, 2)sr bcnm1 30069060424 - rc items:- 1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, 3.side bearer top plate, 3)se boxnr 25079770289 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 4)sc boxnm1 10099563133 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 5)wr boxnm1 10089761198 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, 4.side bearer top plate, 6)se boxnrhs 25079660443 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 7)se boxnm1 10079663136 - rc items:- 1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 4.yoke pin, 4.side bearer top plate = 7 wagons. ds8 no:023310-25-24099 dt: 27.02.2026. location: jtj yard. custodian: sse - c and w - jtj. remarks: wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside except for sl no 2) special repair bcnm1 30069060424. pl.no. 98110159. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Crane Spare Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors