Latest crank handle Tenders | Government crank handle Tenders

Central Government/Public Sector

CTN :40773560

16 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For corrigendum : repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with co

CTN :41017624

01 Aug, 2025 NA

Multi City - Multi State

Tender For supply of eolb component consists of (a) all gear drive mechanism for electric lifting barrier to drg.no.s&t/mft /6000/adv1 with crank handle or with latest amendments -1no. (b) motorized boom lock for electrically operated lifting barrier [ lock consisting of 24v d.c.motor ]

Central Government/Public Sector

CTN :40969873

28 Jul, 2025 2.00 Crore

Jorethang - Sikkim

Tender For supply, installation and commissioning of medical equipment, instruments, furniture and items for jorethang chc - defibrillator, suction machine, refrigerator 230 ltr, x-ray view box, instrument boiler, dressing trolly, medicine trolly, ecg machine 12 channel, infusion pump, syringe pump, patient trolly, catheter tray, wheel chair, footsteps, screen, abg machine, nebulizer, vertical autoclave, lyrangoscope adult, lyrangoscope child, water purifier, gyeser 25 ltr, surgical scissor, thermometer, tongue depressor, transfusion kit, otoscope, intubation tray, urinal/bed pan, kidney tray, needle distroyer, ambu bag/adult/pediatric, oxygen cylinder d-type, hub cutter, extension cord, stethescope, adult weighing machine, bp apparatus pediatric, height scale, neonetal weighing scale, a.c 1.5, patient stool, pediatric weighing scale, digital thermometer, microscope, vdrl shaker, phlebotoxy chair, haemometer, steel rack, computer/printer, eye shield, neck shield, medicine rack, stand fan, bp apparatus digital/manual, iucd tray with lid large, iucd tray with lid medium, iucd tray with lid small, instrument trolly, artery forceps curved, artery forceps straight, sponge holding forceps, uterine sound, knife dish, steel drum small, steel drum medium, steel drum large, fsh fetel doppler, suture cutting scissor small, suture cutting scissor medium, infant weighing machine, glucometer with strips 500 nos, haemoglobinmeter with strips 500 nos, medicine clipboard, ot light for iucd, breast feeding chair recliner, spot light, instrument tray big, instrument tray small, instrument tray medium, ot table, forceps, kelly forceps, mosquito forceps, scalped handle, cutting scissor, tissue forcep, allis tissue forcep, boney tissue forcep, gallipot/sputum mug, dressing set, cheattle forcep, surgical blade, needle holder/curved/straight, artery forceps, staple remover, inverter 5 kv, dental x-ray, dental chair with compressor, scaler,roror and hand piece, a.c 2 ton, distilled water filter, rvg sensor, laptop, acrylizing unit for denture, polishing unit, micromotor, straight hand piece, denture flasic, semi adjustable articular/dog bite, reclining chair, radient warmer, photo tharepy (led), billi blanket, double dome ot light, anesthia workstation, cautary machine, 02 cylinder b-type, ressutation kit/adult/pedia, weighing machine adult, fumigator, portable ot light (single dome), table fan, crash cart, ot instument set, multivital monitor with accessory, ventillator, weighing machine neonatal, labour table, recurssertation tray, baby suction, ldr bed, iv stand, pv table, nst machine, doppler machine, inverter 3kva with batteries, cardic table, ambu bag/adult/pediatric, fetoscope, delivery set, dnc set, pph set, pv exemination tray, ppiucd set, cidx tray, dressing drum(big), se set, geyser 15 ltrs, shoe rack, stand fan, fowler bed with mattress, bed side patient locker, 0xygen cylinder d-type, bbr, inverter for fridge, examination couch, overhead pully/multi exercise chair, quadrileps table/chair, supinator/pronator exercise, wobble board, shoulder wheel, grip strengthening equipment, parallel bar, irr lamp, ift, ultrasound tharapy, tens, dumbells 1kg/2kg, weight cuff set, ankle exercise, c.p.m (lower), static bicycle, kinesiology tape, autorefrectometer, slit lamp, m.g.p.s, generator 50 kva, shifting of x-ray, dental machine and equipments (service engineer charges, minor electrical works, minor civil works, labour charges and other miscellenous expenses, washing machine, drying machine

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

corporations/Associations/Others

CTN :40685704

14 Jul, 2025 NA

Coimbatore - Tamil Nadu

Tender For corrigendum : supply of examination table , wheel chair rigid , foot stool , static stool , steel rack , instrument trolley 24x18x32 inches , instrument trolley 48x36x32 inches , foldable bed side screen , dressing tray with lid 12x10 inches , dressing tray with lid 12x15 inches , dressing bin 12x9 inches , dressing bin 12x15 inches , sterilizer , dressing trolley with basin stand , stretcher x-ray permeable with mattress , bed side locker , cardiac table , soil linen trolley with 4 wheels , patient shifter , indent trolley with both side handle and 4 wheels , steel rack with compartment for pharmacy dispensing area , platform trolley , patient walker

Crank Handle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others