Latest crank shaft scrap Tenders | Government crank shaft scrap Tenders

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042588

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] special repair 85060260069 bvzc [2] cr 85019460052 bvzc [3] cr 85019650217 bvzc [4] special repair 85069660242 bvzc [5] nr 85030160023 bvzc [6] special repair 85069656917 bvzc [7] ser 85079660300 bvzc [8] wr 85080450457 bvzc [9] ser 85079760031 bvzc [10] nr 85039600360 bvzc [11] wr 85080160233 bvzc [12] ecr 85100360018 bvzc. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (113.460 mt) is the lot quantity (113.460 mt ) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighatarea beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

corporations/Associations/Others

CTN :45028317

04 May, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,wiring harness (w/o),scrap alloy wheel,scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap - plastic fragments (pcb),scrap automotive seats,compressor scrap,scrap shocker,scrap rubber (pcb category),scrap defaced engine (4w),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),battery bulk (lithium) (pcb category),scrap tyres with and without rim (cv),scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap leaf spring,scrap wiper blade w/o motor,scrap steering rack w/o motor,defaced engine scrap (cv-80% steel),scrap defaced cng/lpg cylinder,radiator and condenser scrap,scrap clutch wire,used mix oil and fuel

CTN :45031623

06 May, 2026 NA

Multi City - Odisha

Tender For auction sale of others - srl no.[1]lot no.cmb 0326153, desc.-u/s released scrap coupler body (cbc), qty-20 nos., wt-3.285 mt, location-north end of roh shed/bndm , srl no.[2]lot no.cmb 0326154, desc.-u/s released scrap c.p top for boxn, qty-90 nos., wt-3.522 mt, location-north end of roh shed /bndm , srl no.[3]lot no.cmb 0326155, desc.-u/s released scrap c.p bottom, qty-110 nos., wt-5.045 mt, location-north end of roh shed /bndm , srl no.[4]lot no.cmb 0326156, desc.-u/s released scrap c.p top modified, qty-50 nos., wt-3.086 mt, location-north end of roh shed /bndm , srl no.[5]lot no.cmb 0326157, desc.-u/s released scrap yoke for cbc, qty-100 nos., wt-10.116 mt, location-north end of roh shed /bndm , srl no.[6]lot no.cmb 0326158, desc.-u/s released scrap knuckle (escc), qty-100 nos., wt-3.670 mt, location-north end of roh shed /bndm , srl no.[7]lot no.cmb 0326159, desc.-u/s released scrap brake beam, qty-250 nos., wt-17.928 mt, location-north end of roh shed /bndm , srl no.[8]lot no.cmb 0326160, desc.-u/s released scrap brake cylinder (14"), qty-15 nos., wt-1.050 mt, location-north end of roh shed /bndm , srl no.[9]lot no.cmb 0326161, desc.-u/s released scrap brake cylinder (12"), qty-16 nos., wt-0.938 mt, location-north end of roh shed /bndm , srl no.[10]lot no.cmb 0326162, desc.-u/s released scrap flap door for boxn & boxnhl, qty-1200 nos., wt-81.780 mt, location-north end of roh shed /bndm , srl no.[11]lot no.cmb 0326168, desc.-u/s released scrap coupler body (cbc), qty-50 nos., wt-8.211 mt, location-scrap yard,msl/bndm, srl no.[12]lot no.cmb 0326169, desc.-u/s released scrap knuckle (escc), qty-40 nos., wt-1.468 mt, location-scrap yard,msl/bndm, srl no.[13]lot no.cmb 0326170, desc.-u/s released scrap yoke for cbc, qty-30 nos., wt-3.035 mt, location-scrap yard,msl/bndm, srl no.[14]lot no.cmb 0326171, desc.-u/s released scrap brake beam, qty-30 nos., wt-2.151 mt, location-scrap yard,msl/bndm, srl no.[15]lot no.cmb 0326172, desc.-u/s released scrap brake cylinder (14"), qty-10 nos., wt-0.700 mt, location-scrap yard,msl/bndm, approx. total ferrous weight-145.985 mt

Central Government/Public Sector

CTN :45019362

08 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot miscellaneous scrap - 98413405 scrap various types of rubber, pvc, fiber and plastic items consisting of pvc dustbin, tricolour battery, pvc pipe, pvc ice box, pvc sheets, drums, chairs, plastic cane different size, poh kit, metar box, cable skin pvc, tube light frame, pvc cooler body with electirc fan, battery box, canopy, bucket, cane, water tank, casing caping, helmets, pallet, washers, various type of air hose pipe with or without attachment of ferrous both side, air brake cylinder poh kit, released pvc gates, pvc tubelight, fall ceilling, side bearer pu pad ring, pvc, plastic,lpg pipe,da gas pipe, plastic doors, and other rubber, plastic, fibre items used in wagons and various type of pvc, fibre, rubber items of diesel loco and signal & tele communication department etc. of shorts and sizes with or without minor non-ferrous, ferrous attachment. ( in two stack)

Central Government/Public Sector

CTN :45031651

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s bazaar scrap such as various types of filters, dust shield spring and including highly corroded nature of foot steps, berth frame, fs shutters, transfer trolley, trolley wheel, car body filter, showel w/wo handle, cot, vacuum cylinder, vacuum chamber, corroded/ dinged/ damaged wagon door, mortar pan, wire powrah, h s lamp, corroded drums of various capacity, zinc coated fs sheets, wagon floor sheet, g.i. sheet, guide spring, guide ring, foam ladder, small paint tins,saw blade, fire bucket, main switch stand, coach door, sliding door, battery boxes, battery box door, collapsible gate, thin spring of various shapes, sorts and sizes in corroded condition, highly corroded nature items (cut barrels, corroded paint drums & barrels), air filter,highly corroded nature items (paint drums), empty dpt can (bazaar), punches plate/ sheet/ screen, corroded shear cutups, ms angle,half cut barrels, traction motor filter (bazaar), channel, cut rails, roof light/tube light fitting, fl housing regulator box, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires, chains, boxes, hoop iron, lamps, wall protector, trough sheets, air filter, clips, panels, gi pipes with/without valves, ci covers, corroded/ damaged/ dinged condition coach/wagon cutup parts, sheets, equalizing stay, brake anchor, commode chutes, pins, rivets, bolts, nuts, small iron pieces, wire rope/safety rope with/without aluminum sling and all other ms/ci/fab items of highly corroded nature and all the above items are of sorts and sizes in full/cut/broken/damaged and with/without minor nfs attachments including loose bits as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: (1) cutting not permitted. (2) during delivery, if any major nfs items found, the same needs to be handed over to custodian. location: 1)14th pathway lhs adjacent to bin 1, 2)14th pathway lhs bin 1, 3)14th pathway rhs wall end.

Central Government/Public Sector

CTN :45019358

08 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98090800 scrap ferrous material consisting of m s sheets, plates, maximum quantity of lirries, cut peices of angles, channels, pipes and foot step, m.s. and s.s. ladders and g.i. pipe and s.s. pipe, m s pipe, door check spring, chairs, small pieces of irsm 44,sab regulator, parts of sab regulator and parts of bmbs brake cylinder, door hinge, door hinge foot, hand brake wheel, tmt bar, push rod,m.s. rounds, main pull rod, nut, bolt, rivets, angle frame and other wagon components and other ferrous items if any. with or without attachment. note: - (1) irsm-44 sheet plate not to be delivered. (2) cutting allowed before delivery if required.

Crank Shaft Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector