Latest crawler excavator Tenders | Government crawler excavator Tenders

Central Government/Public Sector

CTN :40507699

18 Jun, 2025 2.07 Lacs

Jharsuguda - Odisha

Tender For supply of safety spares for be1000 hydraulic excavator - basic control panel unit assy_part no_99751 , check valve_part no_ 99351 , cone nozzle with cap_part no_ 99852 , actuator knob_part no_ 99250 , connector_cable assy_part no_ 99551 , 1by4inch hose assy l_4800_part no_9965014480

Central Government/Public Sector

CTN :40384518

31 May, 2025 4.38 Lacs

Nagpur - Maharashtra

Tender For corrigendum : supply of spares for engine mounted on komatsu make hydraulic excavator pc300lc - stud part no 6742015047 , tube part no 6745715120 , nut part no 6736816170 , injector part no 6745123100 , part no 6745123100 injector

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

corporations/Associations/Others

CTN :40323285

29 May, 2025 1.09 Crore

Thoothukudi - Tamil Nadu

Tender For corrigendum : supply and delivery of crawler excavator for thoothukudi city municipal corporation

CTN :40458351

12 Jun, 2025 2.23 Lacs

Multi City - Multi State

Tender For invitation of quotation for cat a spares for hydraulic excavator jcb js 205

CTN :40140600

21 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - m4 washer , hex head screw m6 x 30 , m8 nut , grease nipple(ispl plate-11.2) , washer m10(sr no-307) , hex nut m10(sr no-84) , screw hex m8 , bolt m8 x 16(sr no-282) , washer plain , nut hex m8(ispl plate-5.04) , m4x screw , nut hex m8 , washer plain m8 , hex head screw m8 x 40(sr no-98) , lock nut , allen key 05mm , grease nipple , grease nipple , nut hex flange(plate ref-1.24) , screw(plate ref-1.54) , o ring(517) , adopter(ms sl no-76) , dowty seal(pr sl-186) , dowty seal(pr sl-187) , de spnr 12x 13mm , pin throttle , stud(plate ref-1.24) , cap (sl no-74) , washer plain (p-131) , handle wire(ispl plate-8.03) , plate(os sl no-74) , spring lock(ispl plate-6.01) , adaptor union (os sl no-46) , dowty seal(pr sl-229) , hex soc head cap screw , disc spring , screw(os sl no-464) , 1/4x1 key , screw allenscrew allen , raditor mounting pad top(pr sl-309) , socket 19mm , clevis pin(ispl plate-12.1) , valve assy(alt ref 3011/107/e3(ord) dt 02.01.19) , spring , connector(ispl plate-12.1) , clevis(ispl plate-12.1) , spacer , socket 26mm , spacer , seal o ring(ispl plate-1.28) , tee-union , screw hex flange head cap (p-87) , key(ms sl-55) , bracket assy , seal trunion shaft(v. p. list sl-336) , top tank cap (ispl plate-2.01) , seal o ring , pin door lock , bush(isplplate-5.03) , bush(ispl plate-8.01) , drain , adapter-cablift pump (ispl& price list) , spacer bearing (ispl plate-3.01) , de spnr 30x32mm , adapter- cablift pump , drain plug , clamp(sr no-66) , jubilee clamp(pr sl-332) , filter tool , clamp(ispl plate-11.3) , seal , o ring , banjo assembly , pin(ispl plate-13.2) , pin cab mtg(ispl plate-6.01) , adapter , clamp , plug , banjo assembly , pin , handle holder lh , handle holder rh , adaptor , relay junction box(pr sl-281) , spacer(ispl plate-3.02) , adaptor (plate-10.5) , adaptor(sr no-116) , bracket , bushing , bty clambing bracket(price list sl-286) , plate rh , dowel screw 3/4 inch (p-37) , fuel strainer(ispl plate-2.03) , cut off switch( ssl ms sl no-37) , wheel spanner 24mm(price list sl-715) , tee adaptor(sr no-59) , spacer(ispl plate-3.01) , intake line hose , pin(ppl sl-05) , pipe assy , sleeve , tee (price list page 3/40) , seal shaft , 900 adjustable elbow(v.p.l sl-52) , pipe assy , front cover sheet lh , pipe assy , pipe assy , rubber hose(plate-2.04) , clamp , mount right rear(plate no-1.60 , sl no-3) , sp bearing/bushes bucket cyl rod end , ball joint (os sl no-90) , pipe assy , door clip(8.03/14) , adaptor , front cover sheet rh , nut , bucket end mech(p-127) , bracket , sp bearing/bushes cabin lift cyl , seal , pipe assy , sleeve(id-54)(ppl sl-20) , cab mtg bkt , union with o ring , bush(ispl plate-14.2) , feed pipe , s p bearing , pipe assy (price list-16) , joint union , joint union , mounting bracket/air cleaner clamp(ispl plate-2.04 , seal (price list-38) , head lever assembly , idler auger chain drive (p-31) , tee(sr no-54) , adaptor (ispl plate-10.4) , adapter(ispl plate-10.4) , hydraulic oil temp sensor(pr sl-292) , pipe assy , pin , shaft , lube oil pump(ispl ssl eng cyl block) , holder injector , pipe assy , element(ispl plate-10.2) , fuel filter , pipe assy , tube , exhaust , tube fuel supply/tube injector fuel (cummins p-46) , pipe assy , tube injector fuel supply (cummins page-46) , tube injector fuel supply (cummins page-46) , pipe assy(plate-11.3/03) , allen bits set , arm cyl seal kit(plate-14.2) , arm cylinder seal kit , seal kit for gear pump(sl-403) , seal kit for 70360 pump , air cleaner hose , element(backhoe) , plate cover , sub assy(plate-10.8) , connector water outlet , front door glass (os sl no-133) , m51 motor seal kit (p-23) , front door glass , 50-18 drive sprocket (p-31) , flow meter , accumulator membrane (p-37) , flow meter (smt-01/04) , gasket cylinder head(plate-1.16/15) , boom end mech(p-127) , drive gear (p-33) , anti void(p-127) , plate cover subassy rh , excavator bucket 400mm , linkage complete , excavator bucket 300mm , kit water pump , rot

CTN :40252519

28 May, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - std self lock nut m10 , o ring , screw(r2) , gasket( plate no- c1-16-1 , sl no-3) , o ring 15.2idx5.30 cross dia , bypass seal (ispl sl no -1206) , gasket for exhaust manifold(plate-4h1176) , bush (item no-309) , bolt m10x80(plate-iii g-3) , hose clip(ms sl-193) , back nut , reflector reflex white(plate iv r-13) , spring extension (plate xxv a) , dowty seal , bolt(ispl sl-502) , buffer , mounting rear road light l s(plate viii h) , bolt m10x50 (plate xxxi p) , mounting rear road light r s(plate viii h) , lock washer (plate xxxi r) , spacer(item no-562) , bolt , strap , lock cover door lh (plate iv n) , relay charge over , cable inner(plate xi-b3) , dump switch(plate-x h-2) , radiator top hose(plate-xxviii b-14) , half clamp(ispl plate-d04) , hinge door (item no-305) , working light switch front , joint , tail lamp right side(item no-907) , glass right side quarter light(sl-378) , glass left side quarter light , seal window left hand side (plate iv p) , ignition switch , pipe fuel , door seal left hand (item no-323) , door tinted glass lower , door tinted glass lower(sl no-322) , hose (plate-xiii n-1) , mounting resilient (item no-114) , hose st pump (item no-1212) , latch assy inner rh(item no-341) , glass tinted right (plate-iv r) , door tinned glass upper(item no-321) , door tinned glass upper(item no- 338) , window tinted glass left hand side(super plate pla , hose 5 by 8 feet bsp (plate-xiii t) , rear window tinted glass (jcb super page-107) , canvas cover(ispl sl-561) , window frame left hand slide (item no-354) , door painted & sealed left hand(item no-320) , link tipping (item no-747) , windscreen front (jcb 3dx super) , liner roof assy (plate iv f) , oil pan assy twin skin (p-801) , valve main relief 227 bar (plate-xv-b) , door right side(item no-337) , valve 3rd section (plate-xv-b) , valve 1st section (plate-xv-b) , operator seat(p-109) , valve inlet (plate-xv-b) , cooler trans hydraulic oil (plate-xxviii b) , bucket 400mm (plate xxxi e) , evb super manual hydro control(11 items) , cylinder dipper (sl no-404) , bucket excavator 0.26 (plate ii-1) , plug(plate-xxxi aa-27) , cap(plate-xxxi aa-28) , valve c w adapter(plate-xxxi aa-24) , coupling(plate-xxxi aa-26) , frame outer rear window(jcb super p-105) , nut gr 1.3 by 4 inch unf (price list) , oil filter transmission(ispl sl-1504) , transfer filter , super filter drain , internal puller , ring scaling (jcb ms sl no 580) , grab sleeve , grab sleev , grab sleeve , grab sleeve , grille front(plate-iii q-1) , thrurst ring , back up tool , assembly jig , belt wrench , lift arm(plate- v a-7) , bucket tapered(plate-xxxi v-1) , washer large , bulb instrument , washer (jcb super plate xxxix c) , clip , nut(b4-4-1) , nut lock 3 by 8 unf (plate i) , screw hex 3 by 8 inch (plate-xxib) , fuse 3 amp(jcb super ix e-10) , strap check (plate iv n) , screw hex head , bolt(a1-7-4) , nut (plate xx e) , whasier 13.2 by 13.0id x 41.2 by 41.0od x 2.9 thk , 7.5 amp fuse (plate ix e) , bolt 3 by 8 unf x 3 (jcb super page xxxix sl no-245) , bolt gr-5 , 1 by 2 inch unf x 3 by 4 inch long , nut , sterring nut , set screw m10x30(plate iv v) , banjo bolt with strainer , clamp , back nut(e1-8-11 by 3) , washer hardened m10 (plate iv v) , plate clamp(e1-4-1 by 5) , nipple , bolt m10x70(plate xiii r) , bolt m 12x100mm , o-ring , clamp mid (plate xxxi g) , link 1.25 ton (plate xxxi y) , clamp , lock cover lh , shim , cap , pedal pad , nut 1-1 by 2 inch unf x 27.5 thk , knob with switch (plate xg) , o ring , switch pannel hazared , screw driver 150mm , mounting cab lower red b-post(plate-iv) , socket 3 by 4 inch a oblique f(plate-vii d-30) , micro relay change over 12v , fuel pipe (feed pump to filter) , fuel tank cap (plate iii c) , stud pre cleaner (plate-xxvi b) , joint , liner to head , 0.8mm thk , lock nut , washer , adopter 90 deg elbow (plate-xiii y-3) , stainer fuel filter (plate iii c) , mounting cab upper green b-post(plate-iv-b) , pivot pin , fuel pipe , socket (24mm

Crawler Excavator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others