Latest crca sheet Tenders | Government crca sheet Tenders

CTN :40510054

09 Jun, 2025 NA

West Singhbhum - Jharkhand

Tender For supply of indoor type 18w led tube light fitting complete nos. luminaire with surface/ wall m ounted led batten with high pressure die-cast aluminum with adc 12 alloy housing or crca sheet (0.6 mm thick) powder coated to white colour suitable for 140-270v, cri 280, pf >= 0.90 at full load, colour temper ature 6000+500 k, working temperature -10 degree c to 50 degree c, luminaire efficacy>= 110 im/w, ip 2 0, surge protection- mov of 2.5 kv (on board), burning hours 2 50000 with all accessories with suitable arr angement for fixng on wall with all the accessories. the luminaire shall conform to is 10322-5-1 (2012) wit h latest amendment if any. driver type - constant current driver with short circuit & open circuit protection. the firm has to submit technical parameters as per annexure a of specification no. pcee/s/185/led/12/21/ rev-0, dec-2021. the complete luminaire shall have replacement guarantee for satisfactory performance a nd manufacturing defects for a period of 60 months from date of commissioning or 72 months from date of supply whichever is earlier. led based luminaire shall be conforming to specification no. cee/s/185/led/12 /21/rev-0, dec-2021. make: philips, bajaj, orient, surya, havells, crompton, syska, goldwyn. [ warranty p eriod: 72 months after the date of delivery ]

CTN :40510442

05 Jun, 2025 NA

Kharagpur - West Bengal

Tender For fabrication,supply, installation, testing and commissioning of 200 kvar apfc pan el (automatic power factor correction panel) with cubical modular construction floor mounting dust and ve rmin proof made of 14/16swg crca sheet as per latest approved specification is standard and harmonic bl ock reactor with capacitors 25 kvar -04 banks, capacitors 20 kvar- 02 banks, capacitors 15 kvar -02 bo nks, capacitors 10 kvar -02 bank, capacitors 5 kvar - o1 bank, capacitors 3 kvar -01 bank, capacitors 2 kvar -01 bank, comprising of housing, capacitors banks. apfc relays, mccb / mcb protection e tc., with all accessories including mounting arrangements suitable to work on 3 phase 440 volts, 50 hz ac supply.features: automatically switch on and switch off relevant capacitor steps to ens ure consistent power factor, continuously sense and monitor the load conditions by the use of the external ct (whose output is fed to the control relay), double side earthing connection, advance c-mos technology based micro processor relay for intelligent power factor control, provision of top and bottom cable entry, en sure easy user interface for enabling reliable understanding of system operation, such as display of real tim e power factor, number of switching operations caried out etc. for hlz, c&w. make: any is approved indian make. ]

CTN :40466894

24 Jun, 2025 20.00 Lacs

Sagar - Madhya Pradesh

Tender For invited rate for cilvil material supply work at financial year 2025-2026 - flag stone (3 inch thickness), flag stone (4 inch thickness), metal red 40 mm, metal crushed 40 mm, metal crushed 20 mm, metal crushed 10 to 12 mm (including cost of spreading), granular sub-base material (including cost of spreading), metal crushed 6 mm (including cost of spreading), brick (open bhatta), brick (fly ash), over size metal (75-100 mm) including cost of spreading, boulder (including cost of spreading), moorum (including cost of spreading), hard copra (including cost of spreading), black cottan soil for plantation (including cost of spreading), stone dust (including cost of spreading), fine sand (narvda), sand (local), masonary stone( 8x8, 6x6 inch), mild steel / tar rod (6,8,10,12,16 mm), cement (isi mark), steel cross chanel frame work, w.c. sheet western (isi mark), w.c. sheet indian(isi mark), washbasin size 630x450 mm with apair of 15mm c.p brass pillar taps (isi mark), urinal 10 litr wit automatic flushing cistern (isi mark), pvc pipe 2 inch (isi mark), pvc pipe 3 inch (isi mark), pvc pipe 4 inch (isi mark), pvc pipe 6 inch (isi mark), gi pipe 2 inch, gi pipe 3 inch, gi pipe 4 inch, lime, distemper (with brand), paints (with brand), emulsion (with brand), paint for metallic item (with brand), paint for wooden item (with brand), primer (with brand), varnish (with brand), turpentine oil (with brand), melamine polish (with brand), granite different thickness, kota stone different thickness, ceramic tiles different thickness, white marble different thickness, glazed tiles different thickness, centering / shuttering, fancing barbed wire, gi chain line febric fencing with size 50x50 mm and 4mm dia wire, fancing pole (ht.-2.5m.), corrugated galvanised sheet with polymer coated, glass panes different thickness, anodied aluminium according to is:1868, powder coated aluminium, polyster powder coated aluminium, laminated particle board, ply board 8mm (waterproof standard brand ), ply board 10mm (waterproof standard brand ), ply board 12mm (waterproof standard brand ), ply board 16 mm (waterproof standard brand ), ply board 20 mm (waterproof standard brand ), mica sheet different thickness, m-30 grade 60mm paver block, stainless steel railing, galvanised fly proof wire gauze to windows with m.s flat, galvanised fly proof wire gauze to windows with m.s flat, angle iron post and strut, structural steel work including cutting ,hoisting ,fixing in diff. position, p.v.c sheet, labour rate (skilled), labour rate (unskilled)

Central Government / Public Sector

CTN :40500733

23 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of ms box for material storage with locking arrangement, hinged cover complete, box siz e in mm lxbxh (1500x500x500), made of 16 gauge thick crca sheet, with ms angle frame over all si des of size 25x25x4 mm, and fitted with lifting arrangements over sides, powder coated texture finis hed color siemens gray. make/brand: krishna engineering concern or similar [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40485470

11 Jun, 2025 NA

Nungambakkam - Tamil Nadu

Tender For supply and provision of 4 way wall mounted type, 3 phase mccb distribution board ade out o f powder coated finished 1.6 mm crca sheet steel, having short time with stand current capaticty of 50ka per second and completer wirth copper bus bar for 3 phase and neutral completed set with suitable earth li nk, cable chambers, 3 phase led indication lamp and digital multifunction meter with ct and internal cont rol wiring, with 400 a 50ka fp mccb as incomer with 2 nos 250 a 36 ka and 2 nos 125 a 36 ka fp mccb as out going with all other standard accessories required complete .acceptable make for mccb : abb, c&s, l& t, havells, siemens, schneider electric, standard, indo asian, and legrand only required. [ warranty period: 30 months after the date of delivery ]

CTN :40402684

10 Jun, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of flex with printing 10 x 2ft , flex board with frame 10 x2 ft , star flex priting with frame 10 x8 ft , 5 mtr tape , screw driver set , hacksaw frame , soft face hammer , brown tape 2 inch , bubble packing roll , roll corrugated , ms pipe 2 inch x20ft , ms pipe 1.5 inch x20ft , ms pipe 1 inch x 20ft , steel gi sheet 9x3 ft , welding rod , store box with cover , door visor silver line , veh mat , desktop computer i7

CTN :40402903

10 Jun, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of crca sheet steel enclosure with dimension 200 x 200 x 150 mm as per annexure , crca sheet steel enclosure with dimension 300 x 300 x 200 mm as per annexure , crca sheet steel enclosure with dimension 400 x 600 x 200 mm as per annexure

CTN :40387830

09 Jun, 2025 3.32 Lacs

Dehradune - Uttarakhand

Tender For supply of misc items - pre painted galvalume aluminium zinc coating gi based corrugated steel sheet , glass sheet , glass putty commercial grade , centrifugal self priming mono block pump , spindle for brass tap

CTN :40390448

26 May, 2025 33

Yelahanka - Karnataka

Tender For furniture for all anganawadis in meenukunte gp - office chair_01, body and door made of 0.8 mm thick (22 gauge) powder coated crca sheet back & shelves made of 0.6 mm thick (24 gauge) powder coated crca sheet four shelves provided making 5 equal compartments for storage high quality three way locking mechanism and traditional solid handle completely knock down design with solid welded legs, table underneath table hight(uth) and table hight 76

State Government

CTN :40425610

04 Jun, 2025 NA

Mulshi - Maharashtra

Tender For providing all types of electrical and electronic equipment in gram panchayat hinjawadi during the financial year 2025-26. - electrical material, supplying and erecting modulartype switch6a / 10a isimark approved make duly erected on provided plate and box with wiring connections complete.(8-1-2), supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation (weight 147 kg) as per specification no. oh-pl/stp, supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation (weight 175 kg.) as per specification no. . oh-pl/stp, supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kv (1-3-29), supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink 2-9-5, supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink 2-9-5, supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink 2-9-5, supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification no fg odf/fls-2, supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm 7-1-15, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting) 5-3-3, supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting) 5-3-7, supplying, erecting & marking tpmcb 6 a to 32amp in provided distribution board 5-3-14, supplying, erecting & marking fpmcb 40a

Crca Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

State Government