Get complete information related to latest Crno Sheet Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Crno Sheet Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Crno Sheet Tenders.
Tender For supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]
Tender For steel wire rope 10mm dia round type conforming to is:2266/2002 or latest, construction: 6 x 36, strand construction: 14-7+7-7-1, wire finish: ungavanized, type of core/lay direction: iwrc (cwr) - st eel core / rho, minimum breaking force: 70.00 kn, rope grades:1960. note: certificate of test. (avail ability of test certificate on each coil or reel of rope from nabl /ilac accredited or govt. lab) with each coil or reel of completed wire rope the manufacturer shall supply a certificate of test as per annex c of is 6594: 2001 duly certified & signed by the competent person, this certificate will cover the following : certificate no.,reel/coil no., name and address of the manufacturer, particulars of rope, grade of rope, date of test, br eaking force (aggregate/actual), name and address of test house making the test and examination, any oth er details. make: mahadev/orion/usha martin/bharath wire ropes/bedmutha-sure [ warranty period: 30 months after the date of delivery ]
Tender For supply of washer spring steel single coil with flat ends m24 is:3063/1994 revision 2 am endment no 1 of 2009 reaffirmed in 2010. [ warranty period: 30 months after the date of deliver y ]
Tender For manufacture and supply of single coil spring steel washer confirming to rdso drg. no. t-10773 to suit 25mm dia bolt. (this is a safety item). specification: irs specification no. t-42-2020 (fi rst revision). [ warranty period: 30 months after the date of delivery ]
Tender For bid to ras tender for supply of elect rodes welding steel mild general , electrodes welding steel armour 6mm , electrodes welding steel armour 3.15 mm , electrodes welding steel armour 4 mm , electrodes welding steel armour 5 mm , electrodes welding steel mild general , electrodes welding steel mild general , electrodes welding steel mild general , nail brad steel cut 20mmx1.50 mm , nail brad steel cut 25mm x 1.50 mm , nail steel spike square shank 125 mm , nails steel wire round 100mm x 5 mm , nails steel wire round 125 mm x 5 mm , nails steel wire round 125 mmx 5.6 mm , nails steel wire round 15 mm x 1.6 mm , nails steel wire round 150 mm x 6.3 mm , nails steel wire round 20 mm x 1.6 mm , nails steel wire round 200 mm x 8 mm , nails steel wire round 25mm x 2 mm , nails steel wire round 30mm x 2 mm , nails steel wire round 40mm x 2 mm , nails steel wire round 50mm x 2.5 mm , nails steel wire round 50mm x 2.8 mm , nails steel wire round 50 mm x 3.15 mm , nails steel wire round 70 mm x 2.8 mm , nails steel wire round 75 mm x 2.5 mm , nails steel wire round 75 mm x 2.8 mm , nails steel wire round 75 mm x 3.15 mm , steel angles 20x20x3 mm , steel angles 25x25x3 mm , steel angles 45x45x5 mm , steel bar carbon hot rolled flat 20x 6 m , steel bar carbon hot rolled round 20 mm , steel bar carbon hot rolled round 25 mm , steel bar carbon hot rolled round 6 mm , washes plain steel zinc plated 11 mm , washers plain steel zinc plated 9 mm , washers spri sing coil type b steel , washers spring single coil type b steel , wire brass soft 5 mm , wire copper hard 1 mm , wire steel mild annealed 1.25 mm , wire steel mild annealed 1.60 mm , wire steel mild annealed 4 mm , wire steel mild annealed 5 mm , wire steel mild annealed 0.56 mm , wire steel mild bright 1.25 mm , wire steel mild bright 2.5 mm , wire steel mild bright 4 mm , wire steel mild drawn glvd 2 mm , wsh spg s/c ty b stl 12 mm , wsh spg s/c ty stl ns 20 mm , rod welding copper 3.15 mm , rod welding hard facing 5 mm , rod welding iron cast super silicon 3.15 , rod welding silicon bronze 1.60 mm , rod welding silicon bronze 3.15 mm , rod welding steel mild 1.6 mm , rod welding steel mild 3.15 mm , rod welding iron cast super silicon 6.30
Tender For supply of galvanised steel chain link fence - laip 3750mm long , laip 2000mm long , concertina coil , barbed wire , binding wire 0.90mm dia , galvanized steel chain link fence , nut bolt 12mm dia 60mm long , nut bolt 12mm dia 100mm long , flat iron 50x6mm , 10mm dia ms round bars , ordinary portland cement grade 43 , coarse sand , 20mm stone aggregates , 40mm stone aggregates , installation of chain link fence
Tender For tender for the procurement of dental materials 2025 - zirconia trimming stone good quality.., zirconia trimming burs good quality.., zirconia milling burs good quality.., zircona trimming green stone good quality(100 nos per pkt).., wire cutter good quality.., weighing scale digital .., vita 3d mailer shade guide good quality.., ultrasonic tips, woodpecker standard quality 1 nos.., ultrasonic tips satelac p5, standard quality 1 nos.., ultrasonic tips ems standard quality 1 nos.., u-15 towner /30 jacquette scalar, good quality.., tweezersstainless steel, good quality.., tungsten carbide burs, good quality.., tropical flouride allplicator tips, good quality.., towel clip, good quality.., toeffel meyer, good quality.., tma wire (straight length), 0.017 x 0.025 10 nos in 1 packet.., thick carborandum disc, good quality.., teflon coated instrument for composite, teflon coated .., tc burs, good quality.., t.(cutter/fissure burs), good quality.., stromli-fgd012a 600x10mm pack of 30.., stromli-fgd011a 400x10mm pack of 30.., stromli-fgd010a 400x5mm pack of 30.., stromli-fgd009a 300x15mm pack of 30.., straight probes, good quality.., stainless steel wire26 gauge.., stainless steel rectangular wires, straight length 0.021 x 0.025 10 in each packet.., stainless steel crown kit,standard quality.., spreader 15-4021 mm, 4 pieces in each packet.., spreader 80 and 10025 mm, 4 pieces in each packet.., spoon excavatorgood quality stailess steel,.., sintered diamond flexible disks,good quality.., sintered diamond ceramic grinding bur(flame & bird shape),good quality.., silicone wheel burs,good quality(100 nos per pkt).., silicone casting ring,good quality.., silicon cylinder blue,good quality.., shade guide vita classical.., scalar tip all types,good quality.., scalar tip,good quality.., round condensors stailess steel,good quality.., round burs medium,good quality.., round bur no.-8,surgical.., round bur no.-4,surgical.., round bur no.-6,surgical.., round bur no.-2,surgical.., rotary file for endodontics 4% 20 4% 25 4% 20 4% 25.., rotary endodontics niti filess2 (21 mm).., reamers 45 - 80 (25 mm).., reamers 15 - 40 (25 mm).., posterior teeth sets, good quality.., post scaling polishing brush and pumice, good quality.., polishings cups and brushespkt.., polishings cups,pack of100 nos.., pink stone (small),good quality(100 nos per pkt).., periosteal elevator,good quality.., peeso reamers,standard quality (boxes).., orthodontic stainless steel wire0.9, 1.1mm,503 gms coil equivalent to leo wire .., orthodontic stainless steel wire 0.8mm,502 gms coil equivalent to leo wire .., orthodontic stainless steel wire 0.7mm,501 gms coil equivalent to leo wire .., orthodontic stainless steel wire 0.6mm, 500 gms coil equivalent to leo wire .., niti wire0.019 x 0.025 (10 nos. in 1 pkt upper and lower).., niti wire0.017 x 0.022 (10 nos. in 1 pkt upper and lower).., niti wire0.016 round(10 nos. in 1 pkt upper and lower).., mouth mirrors good quality with handles,good quality .., mirrors for lite tonch er yag loser hand piece,good quality.., micromotor bursstraight, taper fissure,round,inverted cone.., microabrassion instrument kit with 6.6% hcl and slicon aorbids sharry, good quality.., micosurgical instrument kit,good quality.., metal trimming small round burs,good quality.., metal trimmerinverted bud shaped (imported)060 and 080.., metal triming burs (ss burs) 708,good quality.., metal polishing burs,good quality.., metal polishing buff,good quality.., metal pellets nickel chromium alloys-1kg.., metal pelletscobalt chromium alloys-1kg.., metal finishing & polishing burs,good quality.., metal diamond disc and mandril,good quality.., metal cutting burs, good quality.., matrix band no.s 1&8.., lazon,400.., lazon,300.., lazon,200.., jiffyprophy polishing brushes for composite, good quality.., imprerssion traysdentulous 2 u/l 3 u/l u4 l4.., h-filles (15-40) assorted, good quality.., heatless wheel (carborandom) big 32mmx2.2mm.., hand scalers stailess stee