Latest cross member Tenders | Government cross member Tenders

Central Government/Public Sector

CTN :44842218

04 May, 2026 NA

Chennai - Tamil Nadu

Tender For lwscz shell kit (a) lscz - one coach set of roof, 2 mm sidewall and end wall for lwscz coaches. 1) sidewall assembly to drg.no. (329) icf/sk3-1-4-091, alt 'b' , col- 1 - 1 no. 2) roof assembly to drg.no. (lwscz) 73916001, alt 'd', col-i - 1 no. 3) end roof assembly to drg.no.(ls) 58116066, alt 'h', col-i - 2 nos. welding pin to drg no 81410012 alt nil to be assembled on roof and sidewall 4) endwall to drg.no. (lslrd) 74115001, alt 'j'-2 nos. the firm shall fulfil the requirement as per icf//md/specn.200, issue status 01, rev 04 with amendment no. 01. the firm shall fulfil the requirement as per icf/md/spec-315, issue status-01, rev.00, amendment no. 01. firm has to supply roof and sidewall without applying etch primer. (b)one coach set of body shell items and partition frames for lwscz2(814) coaches to drg nos, 1. 81410002, alt nil- 1no. 2. 81410005, alt 'e'- 1 no. 3. 58210036, alt 'b'- 2 nos. 4. 67010011, alt 'a'- 2 nos. 5. 58110017, alt 'c'- 2 nos. 6. aag10457, alt nil- 4 nos. 7. aab10338, alt nil-16 nos. 8. 58110015, alt 'a'- 6 nos. 9. 58110016, alt 'a'-3 nos. (c) under frame arrangemnt to drg no. 81411001 alt 'f' the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : a) -packing as per icf/j&t/misc-2201, alt 'e', safety instruction as per icf/j&t/sk-1867, alt. 'nil' -packing as per icf/j&t/sk-1809, alt 'a'. b) - packing condition as per icf/j&t/sk-1865, alt "a". c) packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as normal side up and side bearer side down. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly& welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor withcross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44842863

06 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of set of cross member . one set consist of 55 number cross member as per drg no. le 11195, alt.a (without groove cut as marked in drawing ) and 20 number cross member as per drg.no.le11194 alt.b [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44843148

07 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of set of cross member & member complete. one set consist of 100 number cross member as per drg. no. 2 10113.1.03.100.179 alt. r and 20 number member complete as per drg. no 2.10113.0.03.100.010 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44843152

07 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : shell kit for memu dmc2 jk 946 a. roof assembly 94416001 000 01, alt 'nil' - 1 no. location of sidewall 94414001 000 01, alt 'nil' - 1 no. end construction pail end 94615001 000 01, alt 'nil' - 1 no. firm shall fulfill the manufacturing facility as per icf/md/specn-200, issue status 01, rev 04 with amendment no 01. firm shall fulfill the manufacturing facility as per icf/md/specn-315, issue status 01, rev.0 0with amendment no 01. b.supply of one coach set of body shell items and partition frames for memu dmc2 jk 946 to drawing nos: 1. 94410003 000 01, alt 'a' - 1 no 2. 74510257 000 01, alt 'nil' - 1 no 3. 94410004 000 01, alt 'nil' - 1 no 4. 74510045 000 01, alt 'nil' - 1 no 5. 94410005 000 01, alt 'nil' - 1 no 6. 94410002 000 01, alt 'b' - 1 no. 7. 94410076 000 01, alt 'nil' - 1 no 8. 94410072 000 01, alt 'nil' - 1 no 9. 94410054 000 01, alt 'nil' - 2 nos. c. under frame arrangement 94411001 000 01, alt 'a' - 1no. firm shall fulfill the manufacturing facility as per icf/md/specn-147, issue status 01 rev.02 with amendment no.02. special condition : packing as per icf/j&t/misc-2201, alt 'e'. packing as per icf/j&t/sk-1809, alt 'a'. packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframe should be supplied as normal side up & side bearer side down. packing conditionas per icf/j&t/sk-1865, alt 'a'. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44815535

16 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, brake beam and truss bar, nut-bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate, bottom plate, ,sbs plate, anchor plate, hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw coupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly , main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, silent block yoke pin support plate, lashing chain, buckle, roller, backing ring, spacer, distance ring, cone assembly and other parts of ctrb, wire supporting hook, protecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod,coupler rod, small cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis].

CTN :44430402

16 Apr, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : supply of anchor chain with accessories cable clench anchor spares for mpv project yard nos 3050 to 3057 d d -no - 3052 , documentation as per sotr for yard no - 3052 , anchor-2475 kg,stockless hhp anchor ty-b for yard no - 3053 , anchor chain cable_247.5 m dia for yard no - 3053 , cable clench for yard no - 3053 , swivel piece for yard no - 3053 , kenter type joining shackle for yard no - 3053 , kenter shackle disengaging device for yard no - 3053 , pin punch for yard no - 3053 , shackle punch for yard no - 3053 , chain hooks for yard no - 3053 , anchor hammers for yard no - 3053 , spare anchor shackle for yard no - 3053 , spare anchor pin for anchor shackle for yard no - 3053 , spare pins for kenter shackle for yard no - 3053 , inspection certificates for yard no - 3053 , documentation as per sotr for yard no - 3053 , anchor-2475 kg,stockless hhp anchor ty-b for yard no - 3054 , anchor chain cable_247.5 m dia for yard no - 3054 , cable clench for yard no - 3054 , swivel piece for yard no - 3054 , kenter type joining shackle for yard no - 3054 , kenter shackle disengaging device for yard no - 3054 , pin punch for yard no - 3054 , shackle punch for yard no - 3054 , chain hooks for yard no - 3054 , anchor hammers for yard no - 3054 , spare anchor shackle for yard no - 3054 , spare anchor pin for anchor shackle for yard no - 3054 , spare pins for kenter shackle for yard no - 3054 , inspection certificates for yard no - 3054 , documentation as per sotr for yard no - 3054 , anchor-2475 kg,stockless hhp anchor ty-b for yard no - 3055 , anchor chain cable_247.5 m dia for yard no - 3055 , cable clench for yard no - 3055 , swivel piece for yard no - 3055 , kenter type joining shackle for yard no - 3055 , kenter shackle disengaging device for yard no - 3055 , pin punch for yard no - 3055 , shackle punch for yard no - 3055 , chain hooks for yard no - 3055 , anchor hammers for yard no - 3055 , spare anchor shackle for yard no - 3055 , spare anchor pin for anchor shackle for yard no - 3055 , spare pins for kenter shackle for yard no - 3055 , inspection certificates for yard no - 3055 , documentation as per sotr for yard no - 3055 , anchor-2475 kg,stockless hhp anchor ty-b for yard no - 3056 , anchor chain cable_247.5 m dia for yard no - 3056 , cable clench for yard no - 3056 , swivel piece for yard no - 3056 , kenter type joining shackle for yard no - 3056 , kenter shackle disengaging device for yard no - 3056 , pin punch for yard no - 3056 , shackle punch for yard no - 3056 , chain hooks for yard no - 3056 , anchor hammers for yard no - 3056 , spare anchor shackle for yard no - 3056 , spare anchor pin for anchor shackle for yard no - 3056 , spare pins for kenter shackle for yard no - 3056 , inspection certificates for yard no - 3056 , documentation as per sotr for yard no - 3056 , anchor-2475 kg,stockless hhp anchor ty-b for yard no - 3057 , anchor chain cable_247.5 m dia for yard no - 3057 , cable clench for yard no - 3057 , swivel piece for yard no - 3057 , kenter type joining shackle for yard no - 3057 , kenter shackle disengaging device for yard no - 3057 , pin punch for yard no - 3057 , shackle punch for yard no - 3057 , chain hooks for yard no - 3057 , anchor hammers for yard no - 3057 , spare anchor shackle for yard no - 3057 , spare anchor pin for anchor shackle for yard no - 3057 , spare pins for kenter shackle for yard no - 3057 , inspection certificates for yard no - 3057 , documentation as per sotr for yard no - 3057

Central Government / Public Sector

CTN :44724912

16 Apr, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of cross member

Central Government / Public Sector

CTN :44700583

22 Apr, 2026 NA

Secunderabad - Telangana

Tender For supply of cross member

Central Government/Public Sector

CTN :44793161

29 Apr, 2026 NA

Rajkot - Gujarat

Tender For supply of cross member for anchor bracket (one set consisting of 01 no. lh & 01 no. rh) as per drg. no. contr-9405-s 6a item no. 12 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44773633

06 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of under frame arrgt for memu/ndmc2/3ph to drg no. 78211001, alt 'a', col 1. firm shall fulfil the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : special care to be taken for under slung items while transit, loading and unloading. the underframe should be supplied as normal side up and side bearer side down. packing to drg no. icf/j&t/misc-2487,alt-'b'. details for satge inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weldparameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

Cross Member Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors