Latest cross ties Tenders | Government cross ties Tenders

CTN :40587006

23 Jun, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of elastomeric pad (tpe spring pad) complete set as per sanrok drg. no. 1ed-1 014 item no. 3 to rdso spec. no. rdso/2011/cg-03 (rev.-01) make:sanrok [ warranty period: 48 months after the date of delivery ]

Central Government And Public Sector

CTN :40586837

12 Jun, 2025 NA

Multi City - Multi State

Tender For supply of modified elastomeric pad design b as per rdso's str no.- wd-20-misc-95(rev-5). as per d rg.no. wd-21109-s-02 alt.2 or latest specn: as per drawing & rdso's str no. qms-5:2000 rev-1 or latest [ warranty period: 30 months after the date of delivery ]

CTN :40563355

05 Jun, 2025 8.19 Crore

Tikari - Bihar

Tender For state scheme (nabard) /25-26/tikari /01 - 1) name of work: construction of high level rcc bridge over morahar river in between mahiyarpur to kurmawaan, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach s

CTN :40563359

05 Jun, 2025 5.77 Crore

Jhanjharpur - Bihar

Tender For state scheme (nabard)/25-26/jhanjharpur/01 - 1) construction of hl rcc bridge in karhara to malleh road over bhutia balan river-ch-2.10 km, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in sub structure with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :-- furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concrete approach slab including

Central Government/Public Sector

CTN :40559102

13 Jun, 2025 NA

Mysore - Karnataka

Tender For supply of elastomeric pad (tpe spring pad) (complete set) to m/s- sanrok, drg. no- 1ed-1014, p art no. 3, conforming rdso specification no rdso/2011/cg-03, rev-01. [ warranty period: 30 mont hs after the date of delivery ]

Central Government And Public Sector

CTN :40529738

24 Jun, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of modified elastomeric pad for casnub bogie to rdso's spec: no. wd-20-misc-95 rev-05 , drw: wd-95005-s-01, alt-8 str: qms-05-2000 (rev-1) e pad, (elastomeric pad, design - a), spec: [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500495

23 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of elastomeric pad (tpe spring pad) complets set as per sanrok drg. no - 1ed -1014 item no 3 to rdso spec no. rdso/2/11/cg-03 (rev-1) (note-1 set=7 tpe spring pad.) [ warranty pe riod: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40469562

14 Jun, 2025 NA

Damanjodi - Odisha

Tender For supply of brake block , elastomeric pad

State Government

CTN :40407665

19 Jun, 2025 624

Bengaluru - Karnataka

Tender For supply of tablets, injections, and suture materials items for the year 2025-26 - skt inj 15 lacks i.u , teny 50mg tablet, retelex 18mg injection, eptifibatide inj 75 mg/100 ml, somatostatin3mg, synthetic absorbablesutures antibacterial, triclosan coated-polyglactin size 3-0 with20mm 1/2 circle round body needle, suturelength 70cm, microcool breathable highperformance gown withtowel (large and extra large), lignocainespray 4percentage, urograffin-20ml, omega3 fatty acid 10 percent 50--ml/iv, wound care irrigation & cleansing solution-500 ml irrigation bag with closed system, wound care irrigation & cleansing solution-250 ml spray, aqua gel spray in aerosol , wound care aqua gel tube aqua gel, wound care irrigation & cleansing solution, triple hydrocolloid based hydroactive gel for autolytic debridement used for necrotic tissue debridement 30gm , translucent foam dressings with waterproof, viral, bacterial barrier, polyurethane top layer with perforated gentle silicone adhesive, ce, iso & fda approved 10x20cm, translucent foam dressings with waterproof, viral, bacterial barrier, polyurethane top layer with perforated gentle silicone adhesive, ce, iso & fda approved 10x10cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent water proof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxymethyl cellulose. size 9x30cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent water proof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxymethyl cellulose. size 9x15cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with chelating agent edta and surfactant bec, ce,iso & fda approved 10x10cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with chelating agent edta and surfactant bec, ce,iso & fda approved 15x15cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with broad spectrum bactericidal efficacy & gel forming technology, ce, iso & fda approved 2x45cm, lubricating deodorant spray conataining water, pine apple oil, eucalyptus oil, extract of lavender, sorbitan mololaureate, glycerol used for liquifying hard stools in stoma bags and provides jasmine fragrance 236ml, triple hydrocolloid (nacmc, gelatin & pectin) matrix, elastomeric polymers, extra foam pad water proof adhesive dressing thickness of 2.5mm used for pressure ulcers and dry wound, ce, iso & fda approved 10x10cm, triple hydrocolloid (nacmc, gelatin & pectin) matrix, elastomeric polymers, water proof adhesive dressing thickness of 0.5mm used for exoriated skin, acute wounds, skin abrasions, pressure ulcers/dry wound ce, iso & fda approved 10x10cm, sting freenon-alcoholic skin protection dressing remover spray with triple silicone 100% blend of hexamethyldisiloxane (hmdso) trimethylsiloxane (tms) and octamethyltrisiloxane free from oils, fragrance & preservatives used for strong adhesive dressings without causing pain and skin tear 50ml, sting free non-alcoholic skin protection barrier spray with triple silicone 100% blend of hexamethyldisiloxane (hmdso) trimethylsiloxane (tms) and zanthalene free from oil, fragrance & preservatives 28ml, standard opaque drain pouch 12 inch with charcoal filter embedded with one side transparent hydrophobic natural fibre comfort panel with integrated velcro tail closure 57mm, scissor free triple hydrocolloid (nacmc, gelatin, pectin) based flexible tape collar skin barrier/base plate with elastomeric polymers, plasticizers, tackifiers, adaptable to different size stoma forming leak proof turtle necking used for deep/retracted stomas

Central Government/Public Sector

CTN :40434876

23 Jun, 2025 NA

Solapur - Maharashtra

Tender For supply of modified elastomeric pad (design - a) for casnub bogies to rdso drg. no. wd-95005-s-01 , alt. - 8. other technical requirements confirming to rdso specification no. wd-20-misc-95 rev. 5 of oct ober 2024. [ warranty period: 30 months after the date of delivery ]

Cross Ties Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector