Latest crushing machine sale Tenders | Government crushing machine sale Tenders

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

State Government

CTN :42905414

03 Dec, 2025 93.24 Lacs

Kota - Rajasthan

Tender For digod to dobari - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, dismantling of flexible pavements dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per morth specification clause 202 by mechanical means bituminous courses & granular courses, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (penetration grade/modified bitumen) binder using plastic waste providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of aggregate and plastic waste cutting in a hotmix plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. (bitumen vg-30) (by mechnical means) waste plastic @ 8% of bitumen. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, providing and erecting typical citizens information board as per approved drawing & specification made of two ms sheet of

CTN :42952794

08 Dec, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of hmp akona and stone crusher akona d d - hmp dd ao156 07 132 gear box rr 15 1 , hmp loc ao156 16 257 belt conveyor , hmp sc ao156 03 067 v belt b 64 , hmp dd ao156 07 140 v belt c 75 , hmp pcu ao156 18 295 v belt , hmp bc ao156 01 009 support roller , hmp fbf a0156 02 032 ruturn roller , hmp sc ao156 03 065 carrying roller , hmp dmd ao156 06 104 trunnion roller assy , hmp dmd ao156 06 105 support roller assy , vfd for bin feeder , vfd for bitumen motor , hmp db ao156 10 164 nozzle , hmp pp ao156-12 199 pressure relief valve , hmp pp ao156 12 209 filter , hmp bt ao156 14 233 bitumen pump , hmp bt ao156 14 232 reduction gear , hmp bt ao156 14 243 gate valve , hmp loc ao156 16 259 return roller , push button for panel , ac motor 3 phase 2 hp for cilo unit , hmp loc ao156 16 265 v pully , hmp loc ao156 16 270 bolt , hmp loc ao156 16 272 washer , hmp loc ao156 16 271 nut , 252518130164 oil filter , 252709140258 air primary filter , 252709140259 sefety filter , fuel filter paper type 1 ltr , fuel filter clith type 1 ltr , ao hmp 001 156 307 bitumen blower cum burner , bitumen tank temp unit , driyer drum pump oil pressure gauge , contactor make tc 415v 10 amp , v belt b 46 , v belt b 62 , v belt b 43 , v belt c 76 , v belt c 210 , aj ed 1510 05 129 pressure plate , aj ed 1510 05 130 clutch plate , aj ed 1510 05 131 release bearing , aj ed 1510 05 132 oil seal , 4h 166 11 0 00 air filter , 48 117 01 0 00 fuel filter element pre , 48 117 02 0 00 fuel filter element secondary , 06 436 01 0 00 spin on filter , aj as 1510 03 063 toggle brg , aj rs 1510 04 071 screen pully c2 21 , aj rs 1510 04 076 pinion shaft , aj rs 1510 04 079 bearing ucp 209 , aj mf 1510 07 103 stangleg bolt , aj mf 1510 07 105 screen bracing nut bolt , aj mf 1510 07 106 screen bush nut bolt , aj mf 1510 07 110 bracket cover nut bolt , aj mf 1510 07 112 toggle block bolt nut , aj mf 1510 07 128 clutch plate nut bolt , aj rs 1510 04 066 screen , aj rs 1510 04 072 output chute , aj rs 1510 04 073 v belt screen to flywheel c 150 , ai ed 1s10 05 080 v belt flywheelto engine , screen gear ring //bid details 2 / 46

CTN :42940986

29 Dec, 2025 16.94 Lacs

Tikamgarh - Madhya Pradesh

Tender For supply of construction and repairing material financial year 2025-2026 at nagar parishad baldevgarh - supply of construction and repairing material financial year 2025-2026, 63mm standard size broken stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site includi ng all lead and stacking etc. complete., 45mm standard size broken stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site includi ng all lead and stacking etc. complete., 40mm standard size crushed stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site includ ing all lead and stacking etc. complete., 26.5mm standard size crushed stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site incl uding all lead and stacking etc. complete., 22.4mm standard size crushed stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site incl uding all lead and stacking etc. complete., 13.2mm standard size crushed stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site incl uding all lead and stacking etc. complete., 11.2mm standard size crushed stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site incl uding all lead and stacking etc. complete., 6.7mm standard size crushed stone-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site inclu ding all lead and stacking etc. complete., crusher stone dust- supply of minral agregate like broken stone/crushed stone/ stone dust/moorum at road side including all lead and stacking etc. complete., moorum with cbr not less than 7-supply of mineral aggregate like broken stone/crushed stone /stone dust/ moorum at road site includi ng all lead and stacking etc. complete., cpvc pipe length : 6 m nominal size 32 mm dia, circle rcc hume pipe 300 mm (12 inch) np3 (300mm), 600 mm np3 rcc pipe, concrete interlockin paver colured block thickness 80 mm, concrete interlocking paver coloured tringulor block thickness 60 mm, 450 mm np3 rcc hump pipe, rcc hume pipe 1000 mm, asian emulsion, chiminey bricks, cement work, manufactured tata gi colour caoted roofing profile sheet thickness of sheet 0.45-1mm, motor grader gd511 h rent, excavator jcb rental services, kerb stone (300x150x450)mm, concrete needle vibrator, high gloss luster wall paint, single 750 w plete vibrators, wall putty work, 6 m pvc floking pipes thickness 1.3-3mm size/ dimmeter 110 to 650 mm, river sand construction sand, vibrator road roller rental service (without diesel), stainless steel 304 for construction, steel hollow sections, 8-32mm tmt bar,for construction,grade:fe 500, tractor rental

corporations/Associations/Others

CTN :42899518

18 Dec, 2025 NA

Luckwada - Chhattisgarh

Tender For supply of bearing d d - 1600016282 bearing roller sph 22236 ck 22236 , 1600024489 adopter sleve h 3136 , 1600016136 bearing roller sph 22240ck plus 3140 with slv , 1600016381 bearing roller sph 22244k with sleeve h3144 , 1600016289 bearing roller sph 22256 ck , 1600030759 adopter sleeve h3156a , 1600016497 bearing roller 22330 , 1600016296 bearing roller sph 22332 ccva , 1600038219 screen duty bearing 22340 , 1600031713 bearing for vibratory feeder no nj2318 , 1600015939 brg sph rolwith ada sleeve equivalent part no ta3850 , 1600025078 bearing 6324 crusher duty bearing , 1600016464 bearing ball 7238bcb , 1600016163 double row spherical roller bearing 23068ck w33 with withdrawal sleeve aoh 3068 with nut , 1700004967 t r brg skf 32218 , 1600036510 taper roler bearing 30317 u 200 gbox , 1600016293 bearing roller sph 22326 , 1700004958 brg. no 2218 , 1600016284 bearing roller sph 22238ck h3138 , 1600016139 double row spherical roller bearing with taper bore 22248ck with adapter sleeve h3148 with lock nut and lock washer. , 1600016178 bearing roller sph 23264ck h3264 with sleeve , 1700004962 bearing 23056cak with sleeve h3056 , 1600016210 bearing roller tpr 32312 , 1600016292 bearing roller sph 22322 , 1600016202 bearing roller tpr 32040 , 1600016207 bearing roller tpr 32220 , 1600016385 bearing roller sph 22320 , 1600016273 bearing roller sph 22224 , 1600015936 brg sph rol with ada sleeve part no ta3650 , 1600015929 ring outer part no ta 1387 , 1600034188 bearing with sleeve 23152k plus h 3152 , 1700004950 bearing with sleave 23156 , 1600016150 bearing roller sph 22336cc w33 , 1600033744 bearing 23176 cak w33-sleeve oh 3176 h , 1600016158 bearing roller sph 23036ck plus h3036 with sleeve

CTN :42605063

05 Dec, 2025 NA

Rangat - Andaman And Nicobar Islands

Tender For corrigendum : supply of materials for various gram panchayats worksite of mgnrega at rangat block - cement, crusher dust, pulvarized sand, stone aggregate, stone aggregate, stone aggregate, stone aggregate, stone aggregate, stone aggregate, moorum, boulder, cement concrete hollow block, cement concrete hollow block, g.i wire, tmt steel bars, binding wire, wire nails, ply wood, g.i corrugated sheet 8 feet, pvc pipe, pvc bend, pvc tee, pvc clamp, pvc solvent, pvc pipe, pvc bend, pvc tee, pvc clamp, level tube, g.i. wire mesh of mesh size 50x50mm, pre cast rcc hume pipe (inner dia-1.00m, length 1.20m,thickness-10 mm .main bars -10 dia stirups -8 dia @100mmc/c spacing rcc mix-1:1,5:3, pre cast rcc hume pipe (inner dia- 1.50m, length 1.m, thickness-10cm .main bars -10 dia stirups -8 mm dia @100mmc/c spacing rcc mix-1:1,5:3, pre cast rcc hume pipe (inner dia-0.50m, length 1.m,thickness-10cm main bars -10 mm dia stirups -8 mm dia @100mmc/c spacing rcc mix-1:2:4, r.c.c fencing post alongwith m.s. hook(top width-12cm, bottom width-15cm, height-1.8 m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3 with hookes@15cm c/c spacing., pre cast r.c.c. ring (inner dia-1.00m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, pre cast r.c.c. ring (inner dia-1.50m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, first aid box, hose pipe, white cement, hire charges of pumpset for dewatering(including diesel), higher charges of road roller, higher charges of pickup van, citizen information board (make mettalic (gi sheet,ms pipe &ms angle with concrete base of mix 1:2:4) shape- rectangular with top edge of the board pointed upward with sides inclined at 20 degrees with horizontal size :-individual work 2ft widthx3 ft height layout:- background yellow , border of the board and text in black colour, citizen information board (make mettalic (gi sheet,ms pipe &ms angle with concrete base of mix 1:2:4) shape- rectangular with top edge of the board pointed upward with sides inclined at 20 degrees with horizontal size :-community work 3ftwidthx4ft height layout:- background yellow , border of the board and text in blue colour, ms pipe, skilled labour, semi skilled labour, ms flat, welding charge, plastic net for plant protection, shuttering, higher charges concrete mixer machine, poly propylene wire mesh, plastic rope (for fencing)

Central Government/Public Sector

CTN :42889029

03 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For repairing of crusher roller shaft and replacement of damaged 120nos. picks with holders in crusher roll of feeder breaker no-1 of kkc link siding, phularitand, amp colliery.

Crushing Machine Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector