Latest cryogenic probe system Tenders | Government cryogenic probe system Tenders

State Government

CTN :41225832

02 Aug, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps. - supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet neoprene rubber 50% synthetic 50% make :- jyoti / national. (1.5 to 2.5 mm) thickness., lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells/djb approved make., s/o front mounting add on aux contact block. make : havells/l&t/djb approved make., s/o three pole power contractor -25a cap. make l&t/ havells/djb approved make., s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae/djb approved make., s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t/djb approved make., s/o indicating lamp set for ryb phase. make l &t/ havells/djb approved make., s/o single phase preventor. make l&t/ minilac/djb approved make., s/o timer switch digital/anolog type. make l&t / havells/djb approved make., s/o over load relay thermal type 14-23 a. make l &t/ havells/djb approved make., s/o star delta timer on delay. make l&t /havells/djb approved make., s/o sp mcb 6a. make : l&t/havells/djb approved make., s/o 3p mcb 63. make : l&t/havells/djb approved make., push button 22.5mm(red / green) make : l&t/havells/djb approved make., s/o 4p 63 amp elcb make : l&t/havells/djb approved make., changeover switch 63 amp. make : l&t/havells/djb approved make., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t/djb approved make., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national /djb approved make., labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

Central Government/Public Sector

CTN :41221387

05 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of portable ultrasonic thickness measuring (d-meter) ,

CTN :41233827

07 Aug, 2025 NA

Bathinda - Punjab

Tender For supply of safety belts , hammer drill ehd-26n , demolition hammer erb-05 , pipe wrench 300mm , pipe wrench 350mm , pipe wrench 250mm , 2 in 1 screw driver 250mm , kassi 202 grade stainless steel , tasla galvanised iron , bucket iron 20 ltr capacity , drill bit hammer 20mm x 12 , drill bit hammer 24mm x 12 , screw driver bit , jigsaw blade , wood cutter blade , manual hydraulic test pump , safety shoes , hand gloves , helmet , shock resistant jackets , dangri protective clothing , gum boots , oxygen cylinder , oxygen mask , ladders with shock proof material , impact screw driver set p-31 , allen key set p-10 , 2in 1 screwdriver set , cross peen hammer 0.27kg , combination plier 165mm , line tester yellow 813 , needle nose plier 6-nos 15.24cm , firmer chisel 15 cm , mini drill machine bosh-gsb-501 , ac and dc digital clamp meter , digital earth resistance tester , socket set p-46 , plier 7.28 inch , steel 2 in 1 screw driver , digital vernier caliper, lc 0.1mm , snap off cutter sk-1 heavy duty , tool bag , big torch chargeable starlight 12-meter leds , safety gloves, 440v electrical insulation , electric safety shoes, size- 6 no - 12no , combination spanner set double sided , rain coat , lcd digital thickness gauge , laser distance meter, digital lcd display, range 50mtr ) /bid number : gem/2025/b/6427542 * /dated: 28-07-2025 & & / bid document 1 / 39

CTN :41233104

07 Aug, 2025 NA

Cachar - Assam

Tender For supply of weight balance 1500 gm , weight balance 10 kg , weight balance 100 kg , dry bulk density test apparatus , los angeles abrasion test apparatus , liquid limit device with astm growing tool , vicat apparatus , needel for vicat , non destructive concrete test hammer , slump cone appratus alongwith tempering rod 16 mm and 600 mm length , specific gravity appatatus_water absorption test , cbr test apparatus , vee bee consitometer , bitumen penetrometer needle container stop watch , marshall stability test apparatus , compressive testing machine , electric oven ranging 0 to 220 degree centigrade , oven universal temp upto 200 degre celcius , hot air lab electric oven , digital soil moisture meter , pychnometer make_exvit , stop watch , dial gauge 25mm travel 0 point 01 mm_division , glass thermometer ranging 0 to 100 degree , metalic thermometer ranging 300 degree , sprit level , bitumen extractor electric operated , digital compass with stand , cube mould 150x150x150 mm , digital rodo meter , benzene , sodium sulphate , wax , distilled water , standared sand , filter paper dia 240 mm with thickness 0 point 71 mm and centre hole dia 25mm _ 100 nos per packet , filter paper dia 240 mm with thickness 0 point 71 mm _100 nos per packet , filter paper dia 150 mm with thickness 0 point 71mm _100 nos per packet , filter paper dia 100 mm with thickness 0 point 71mm _100 nos per packet , elongation and flakiness test appratus _complete set , sieve size 37 point 5 mm 450 mm dia , sieve size 20 mm 450 mm dia , sieve size 19 mm 450 mm dia , sieve size 2 point 36 mm 200 mm dia , sieve size 75 microm 200 mm dia brass , pan 200 mm dia brass , lid 200 mm dia brass , sieve shaker , bitumen extractor mannual , alv test appratus _complete set , sand replacement appratus , acrylic board 3 feet x 2 feet , digital infrared thermometer _laser beam , weigh balance electronic with 01 gram least count 5 kg capacity , electronic weigh balance 15 kg capacity , electronic weigh balance 25 kg capacity , electronic weigh balance 1 kg capacity , tempalate , core cutting machine _core dia 100 mm and diesel engine with self //bid details 2 / 45

CTN :41196089

21 Aug, 2025 NA

Delhi - Delhi

Tender For supply of prosthetics and orthotics 42 items d d - orthotic knee size three with upper and lower bars , high grip hook and loop fastner , sach foot adapter , mechanical four bar linkage polycentric knee joint , eyelet ring , shoe track nails , adhesive pc 65 , ethaflex , jigsaw blade metal , long hammer , heavy duty high carbon steel scissor , d ring , aluminum rivet , milwaukee kit , copper rivet , round copper washer , file half round metal , file flat metal , twist drill bit , surform blade half round , deburring tool , plier , steel wire mesh net , masking tape for shoe patterns making , pu adhesive , sach foot with toes , polyfab sheet nonwoven chemical sheet , pu adhesive hardener , talcum powderfor easy last removal , one furth inches bifurcated rivets , half inches bifurcated rivets , bonded tube clamp adaptor with pylon , calf leather , pvc grains ldpe 040 , body powered be kit , body powered ae kit orthotic knee size-iii with upper & lower bars material of primary product-joint stainless steel joint thickness 8 10 mm weight limit: 100 kg: part weight 255 to 270 gm. +/- 5%. includes: (1) ms nut bolt length of joint 9 --9.4 cm width of joint 25mm length of upper bar from joint centre 14 inch plus minus 2 inches length of lower bar from joint centre 16 inch plus minus 2 inches width of bar 2 cm bar thickness 5 mm material of bar the material used for the manufacture of orthotic joint bars shall be aluminum alloy of designation 64423 wit4 of is 733 or any other equivalent material., high grip hook & loop fastner roll length of hook 25 meter (40 roll of 25 meter) length of loop---- 25 meter (40 roll of 25 meter) width of hook & loop 1and inches material--- nylon/ polyester colour------ ) /bid number : gem/2025/b/6482561 * /dated: 24-07-2025 & & / bid document 1 / 37

Central Government/Public Sector

CTN :40217181

30 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of special steel wire rope sling assembly - boq item 1 - dia 80 x 22 meter long special steel wire rope sling assembly. , boq item 2 - dia 16 mm x 10 meter long steel wire rope sling. , boq item 3 - dia 92x19 meter long special steel wire rope sling. , boq item 4 - dia 72x6 meter long steel wire rope sling. , boq item 5 - dia 80 x10 meter long steel wire rope sling. , boq item 6 - dia 80 x5 meter long steel wire rope sling. , boq item 7 - dia 40 x10 meter long steel wire rope sling. , boq item 8 - flat polyster sling webbing width 200mm web thickness 14mm swl

Central Government And Public Sector

CTN :41237382

06 Aug, 2025 NA

Multi City - Multi State

Tender For erw quality plain end m.s pipe to size 100mm nb, wall thickness 4.5mm, outside di ameter range: 113.1mm to 115mm. pipe should be supplied in the range 6 to 7 meter. supply as per is - 1239/part 1( clause 8.1). note: material test certificate shall accompany the supply. [ warranty period: 12 months after the date of delivery ]

State Government

CTN :40888043

31 Jul, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of ultrasonic thickness measuring instrument (d meter) required for stage-i/ytps.

Central Government/Public Sector

CTN :41199905

08 Aug, 2025 NA

Amritsar - Punjab

Tender For supply of dry film thickness (dft) meter (q3)

CTN :41212488

05 Aug, 2025 NA

Kharagpur - West Bengal

Tender For supply of caution board 01 meter dia, thickness-02 mm with ms angle frame and 3m retro reflective stickering and with ms angle stand size-50 x 50 x 05, length- 3.6 meters, as per drawing [ warranty period: 12 months after the date of delivery ]

Cryogenic Probe System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector