Get complete information related to latest Crystal Salt Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Crystal Salt Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Crystal Salt Tenders.
Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co
Tender For miscellaneous electrical goods - supply of misc electrical goods, supply of dowells make crimping lugs(copper/aluminum),round sleev discount on price list to be quoted (current price list to be attached with tender) discount on price list will be allowed @_______%, bch make limit switch 415 v, type ltpr, bch make foot switch s pole , acii-440ac/a,dc11-230dco.2a, 600 v max., limit switch of above foot switch bch make, hand lug crimping machine 1.5 mm to 25 mm dowells/jainson make, over load relay 0.9 to 1.35 amp., air break contactor 16 amp. 415 v, ac bch make catagary coon., no volt coil of above for bch make contactor 415 vold ac, aur.contact block for bch make (1 no + 1 nc) for above contactor, anti corrosion paste for lug punching dowells make, machanical crimping machines 25sq.mm to 400 sq.mm with dye hydraulic, sealing kit for above solenoid valve rotex make ( rubber o rings), hard drawn copper wire 4 swg, hard drawn copper wire 6 swg, brass holder for cane unloader carbon brush (95x30x20), rishab make ampere meter 96 x 96 mm, a) range 0- 200 amp, ctr 200/5 amp., b) range 0- 250 amp, ctr 250/5 amp., c) range 0- 150 amp, ctr 150/5 amp., d) range 0- 400 amp, ctr 400/5 amp., e) range 0- 120 amp, ctr 120/5 amp., f) range 0. 50 amp. ctr 50/5 amp., k) range 0. 60 amp. ctr 60/5 amp., l) dol range 0. 10 amp. dol, m) dol range 0. 15 amp. dol, n dol range 0. 30 amp. dol, o) dol range 0 5 amp dol, rishab make ampere meter 70 x 70 mm rane 0 150 amp, ctr 150/5 amp., rishab make ampere meter 96 x 96 mm range 0-100, ctr 100/5, rishab make ampere meter 96 x 96 mm range 0-75 amp,, havells make change over switch 4 pole, 415 volt, a) 600/630 amp, b) 400 amp., c) 315 amp., d) 1000 amp., e) 250 amp, f) 800 amp, 3 phase swicth interiar 800 amp ee make type cmm-800 415 volt ac, hrc fuse ee make 800 amp, i.c.t.p. switch 100 amp. 415v, havells make, i.c.t.p. switch 63 amp., 415v,(havells make), i.c.t.p. switch 32 amp., 415v,(havells make), i.c.t.p. switch 16 amp., 415v,(havells make), rishab make volt meter range 0-500, size 100x 100mm, digital frequency meter 2/3 phase, 50 hz, 415v, 96 x 96mm meco make, al external fan for ngef make motor frame amk 180, 20 hp, air heater 200 w manufactured by amit agro associates rampur, copper sleeve/ pipe 25 sq mm, copper sleeve/ pipe 50 sq mm, copper sleeve/ pipe 70 sq mm, copper sleeve/ pipe 120 sq mm, copper sleeve/ pipe 185 sq mm, copper sleeve/ pipe 240 sq mm, old type indicating 7 watt lamp with holder vaishno/siemens (p.t.), c.t. 50/5 and 60/5, c.t. 75/5 and 100/5, c.t. 60/5 and 50/5, c.t. 200/5, c.t. 300/5, c.t. 400/5, c.t. 250/5, c.t. 600/5, c.t. 800/5, bharat bijlee make crc- 2 26 in 415 ml(300 gms) packing, taparia/everest make insulating plier size 8 , lock nose plier 8 , screw driver set/ kit tapparia make, taparia make line tester cum screw driver, taparia make phase tester 500v,no.813, digital multimeter 4.1/2 digit,19999 lcd large display with annu. meco make , model 235 mark i, range : dc voltage 200 mv12/20 , 200/1000v, accuracy: +/- 0.05% rdg. , + 4 dg./on. , all ranges, ac voltage: 200 mv/2/200/750 (4 hz + 3 khz). power- one 9v battery eveready , type 216- fluck make, empire glass cloth paper 7 mile, empire tape 1 width x 10 mtr long, weaving tape 1 with x 10 mtr long, cotton tape 1 width x 10 mtr long, super fine glass tape 1 width x 10 mtr long, cona/steel grip make pvc adhesive tape 12 mm width x 8.5 mtrs, a.c. transformer, primary voltage 415v, secondary voltage 110 v, va-1250, rank make, rank/usha make heavy duty auto battery charger 24 v output, supply with on-off switch, selector switch, volt meter & amp. meter complete unit. input 220 v, usha make rectifier for battery charger 1/12, leatheroid paper with plastic film 5 mile in standard sheets (trivolton make), do- but 7 mile, glass sleeve 12 mm, glass sleeve 1 mm, glass sleeve 2 mm, glass sleeve 3 mm, glass sleeve 4 mm, glass sleeve 5 mm, glass sleeve 6 mm, glass sleeve 8 mm, glass sleeve 10 mm, distilled water, battery termina
Tender For supply of fork extension for the existing electric fork lift platform (make- godrej, model- gx 300e) technical requirements: 1. material & construction: high-strength mild steel with hallow type structure , designed for easy sliding over existing forks, provided with locking pins or heel restraints to secure fork extension against accidental slipping, formed heavy-duty rectangular steel sections with closed tips,internal reinforcement to prevent bending or torsional twist. smooth welds, free from cracks, undercuts, or surface defects. rounded edges to prevent damage to loads, tapered front end for easy pallet entry. 2. dimensions: length- 2250mm (without locking arrangment), length- 2400mm(with locking arrangement), width- 150mm height- 80mm (opening/hollow side), height- 25mm (closed side) thickness of material :min. 6 mm (close fit to avoid lateral movement) 3. load capacity: safe working load (swl) = 3ton 4. finish: coated with anti-corrosion primer with industrial-grade enamel powder coating (safety yellow or black) final finish. ]
Tender For bid to ras supply of hylomer pl32mg compound , compound jointing hylomar aerograde , anti corrosion compound , primer for silicoset series 152
Tender For supply of refrigeration gas charging/ recovery manifold set suitable for r407c/ r22refrigerant consisting of 1). three coloured 5 meter length hoses of each color made up of rubber nylon resin material with anti-corrosion, low fluid resistance, high bearing pressure- red(hp), blue(lp), yellow (charging/recovery of refrigerant) with dial 1/4" female couplers, working pressuer 600 psi, bursting pressure 3000 psi, 2). three valve manifold gauge with one no. l.p. & vaccum gauge upto 350 psi, one no. h.p. gauge upto 800 psi. make- camipro/uriewld/rishabh/ frigsale or similar. [ warranty period: 30 months after the date of delivery ]
Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-9 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance(esr) protection. 7). dielectricfootwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified)reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanizedrubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-10). (size and quantity details furnished in annexure). [ warranty period: 30 months after the date of delivery ]
Tender For supply of diet items and bread to general hospital, women and children and ed hospital kgf - soya beans, kgf coffee powder, kgf egg, kgf iodised crystalsalt, kg fmtr sambar powder , kgf banana plantane , kgf big size coconut, kgf onion, kgf vegetables (leafy, roots and others), kgf sugar white crystal, kgf tamrind seedless, kgf different types of pulses , kgf superior qualitytoor dal, kgf superior quality groundnut oil , kgf first grade rice a grade/sona masoori