Get complete information related to latest Cs Pipe Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cs Pipe Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cs Pipe Tenders.
Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts
Tender For call for purchasing to all kind of road and building material - 80 mm. metal white-(hand broken metal) with royalty, 80 mm. metal black -(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 40 mm metal black- (crusher broken metal) with royalty, 20 mm metal black- (crusher broken metal) with royalty, 12 mm metal black-(crusher broken metal) with royalty, 6 mm metal black-(crusher broken metal) with royalty, boulders rubbles and masonary stones, sand river (unscreen) with royalty, sand (nallah bed), soft murum with royalty, hard murum with royalty, soil, cement 53 grade opc, cement 52 grade ppc, burnt bricks ( ii class), cement brick, mild steel bars of various sizes, tmt steel bars of various sizes, tmt steel bars of 6mm, tmt steel bars of 8mm, tmt steel bars of 10mm, tmt steel bars of 12mm, tmt steel bars of 16mm, bitumen pad tin 60/70 at mumbai, murum carting only, vibrater per day with desel, mixter machine per day with desel and driver, water tanker with desel and driver, centring rent for drain work, centring rent for cement road, centring rent for building work, jcb witjh desel and driver, centring tar (per kg), rcc pipe 900 mm, rcc pipe 800 mm, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, compaction of earth work in embankment upto layer of 30cm comp machinary charges only, compaction of soft murum/ kankad 2.00 to 7.00 width (200mm loose) with static roller including necessary artificial watering etc complete, transporttion of soft murum on road side etc complete as per analysis, information board 1)size 1.20 x 0.90, information board 2) size 0.75 x 0.90, transportation of excavated soil from ex-mat. tank to field up to 3km, oil paint, rcc door frame, destemper, birla white, hand wash basine, show shem, comod sheet, sub mersible cable 3 core 2.50 sq.mm, oil engine, meter stone, steel pipe various size, ferlong stone, grill work, rollar per day with desel driver, laterin sit, bend, murga, pavour block, quota tyles, vetryfied tyles 590mm*605mm, thick.8 to 10 mm, bt pod, wc pod, nutri tap, ms poor, ac sheet, gi sheet, panel board(fabrication work), elcb, lock, alluminium window frame, iron fencing pole, barbed tar far fencing, fencing steel jali, bala painting, rcc fencing pole, synthe textured pint, diamond gras, piching stons, iron binding wire, to throw away the collected silt from the drain, steel fabrication work
Tender For supply delivery of some spare parts required for regular repairing overhauling of chlorine machines in khanakul i and ii block at different w/s scheme dist hooghly under electrical division phe dte - supply & delivery of following materials (total pump house- 102 nos). from 01/09/2025 to 31/07/2026., 15 mm dia flexible pvc pipe for supply chlorine solution.(approved make), 15mm dia upvc pipe made to astm d-1785, schedule 40(light) duty [make: suprem/oriplast / ashirvad/any approved], g.i. short piece of tata make (above 50mm & upto 150 mm ong), 15 mm dia gi elbow, 15 mm dia tail piece, 15 mm dia powder coated metal clamp, 15 mm dia fabt (upvc), 15 mm dia union (g.i.), 15 mm dia tee (upvc), 15 mm dia long screw (g.i.), 15 mm dia iron jam nut (g.i.), 15 mm dia nrv (approved make), coupling rubber, diaphragm, pinion, bearing (skf), oil ring (approved make), oil chamber nut (approved make), ball set (approved make), 15 mm dia pvc ball valve, mobil mak gold (make - castrol), 15 mm upvc tank nipple (make- ashirbad/ supreme/approved make), 100 ltr. capacity pvc tank for chlorine solution (make: sintex/patton), 16 amp triple pole main switch, 415v ac, 50hz with neutral link. [make: havells/siemens/standard], direct online starter, 415v, 50hz, 3ph, relay range (1-1.6 amp).[make: l&t (model-mk1) / siemens ], eceentric strap, eceentric, 1.5 sq. mm flexible copper wire fr pvc insulated 1.1 kv grade, is 694 [make- finolex / havells/equivelent], labour charges for dismatling and refitting after repairing the chlorine machine set from existing position including fitting fixing the above [sl.no.- 1(a to ab)] by dismantling the old one including supplying necessary materials as required including testing commissioning all complete as per direction of eic. for the 102 nos. sites of hooghly., carrying of burnt out 0.5 hp chlorine motor form w/s scheme to nearest work shop for repairing., rewinding of 0.5 hp chlorine motor with suitable size copper wire including heat varnish and all complete as per direction., carrying of repaired 0.5 hp chlorine motor form work shop to following w/s scheme, p.h., add: 18% gst, add: 1% cess
Tender For supply delivery of some spare parts required for regular repairing overhauling of chlorine machines in arambag goghat i and ii haripal sankrail blocks at different w/s scheme dist hooghly and howrah under electrical division phe dte - supply & delivery of following materials ( total pump house-102 nos). from 01/09/2025 to 28/02/2026., 15 mm dia flexible pvc pipe for supply chlorine solution. (approved make), 15mm dia upvc pipe made to astm - d - 1785, schedule 40 (light) duty [make : suprem/oriplast / ashirvad/any approved], g.i. short piece of tata make (above 50mm & upto150 mm long), 15 mm dia gi elbow, 15 mm dia tail piece, 15 mm dia powder coated metal clamp, 15 mm dia fabt (upvc), 15 mm dia union (g.i.), 15 mm dia tee (upvc), 15 mm dia long screw (g.i.), 15 mm dia iron jam nut (g.i.), 15 mm dia nrv (approved make), coupling rubber, diaphragm, pinion, bearing (skf), oil ring (approved make), oil chamber nut (approved make), ball set (approved make), 15 mm dia pvc ball valve, mobil mak gold (make - castrol), 15 mm upvc tank nipple (make- ashirbad/ supreme/ approved make), 100 ltr. capacity pvc tank for chlorine solution (make : sintex / patton), 16 amp triple pole main switch, 415v ac, 50hz with neutral link. [ make: havells/ siemens/standard ], direct online starter, 415v, 50hz, 3ph, relay range (1-1.6 amp). [ make: l&t (model-mk1) / siemens ], eceentric strap, eceentric, 1.5 sq. mm flexible copper wire fr pvc insulated 1.1 kv grade, is 694 [make- finolex / havells / equivelent], labour charges for dismatling and refitting after repairing the chlorine machine set from existing position including fitting fixing the above [sl.no.- 1(a to ab)] by dismantling the old one including supplying necessary materials as required including testing commissioning all complete as per direction of eic. for the 102 nos. sites of hooghly., carrying of burnt out 0.5 hp chlorine motor form w/s scheme to nearest work shop for repairing., rewinding of 0.5 hp chlorine motor with suitable size copper wire including heat varnish and all complete as per direction., carrying of repaired 0.5 hp chlorine motor form work shop to following w/s scheme, p.h., add: 18% gst, add: 1% cess
Tender For corrigendum : laying of dedicated pipe line for improvement of functionality and design, supplying. fabrication, erection commissioning including 3 (three) months trial run of 135m3 hr. capacity pressure type iron elimination plant with backwash water disp
Tender For supply construction,water supply and electric material for tanda wasti,dalit wasti,2515,aamdar,khasdar nidhi and other yojna for gp khursapar for year 2025-26 1st call - all material list, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement, rolar, water tankar, khadanga, sand black, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks table, mixer machine, tiles, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm thick and 930 profile roof, islb angle, iron angle, iron window grill & palla, plastic water tank (500 lit.), plastic water tank (1000 lit.), plastic water tank (2000 lit.), distemper, jcb, damber/ tar oil, alluminium sliding window, cement pipe 150 mm, cement pipe 300 mm, cement pipe 600 mm, cement pipe 900 mm, cement pipe 450 mm, kota stone, vibrating machine, ms grill, snowsem, cement paint, oil paint, tarpipne, gi sighn board with painting, wc pan, paiwar block, compound cement poll, polythene sheet, rubble, pvc pipe 4kg 63 mm, pvc pipe 4kg 75 mm, pvc pipe 4kg 90 mm, pvc pipe 4kg 110 mm, pvc pipe 4kg 140 mm, pvc pipe 4kg 160 mm, pvc pipe 6kg 63 mm, pvc pipe 6kg 75 mm, pvc pipe 6kg 90 mm, pvc pipe 6kg 110 mm, pvc pipe 6kg 140 mm, pvc pipe 6kg 160 mm, pvc pipe 10kg 63 mm, pvc pipe 10kg 75 mm, pvc pipe 10kg 90 mm, pvc pipe 10kg 110 mm, pvc pipe 10kg 140 mm, pvc pipe 10kg 160 mm, bleaching powder 25 kg bag, gi pipe 1/2", gi pipe 3/4", gi pipe 1", gi pipe 2", gi pipe 2 1/2", gi pip 3", gi pipe 4", pvc cappling 4kg 1/2", pvc cappling 4kg 3/4", pvc cappling 4kg 1", pvc cappling 4kg 2", pvc cappling 4kg 2 1/2", pvc cappling 4kg 3", pvc cappling 4kg 4", pvc cappling 4kg 5", pvc cappling 4kg 6", pvc cappling 6kg 1/2", pvc cappling 6kg 3/4", pvc cappling 6kg 1", pvc cappling 6kg 2", pvc cappling 6kg 2 1/2", pvc cappling 6kg 3", pvc cappling 6kg 4", pvc cappling 6kg 5", pvc cappling 6kg 6", pvc cappling 10kg 4", pvc cappling 10kg 5", pvc cappling 10kg 6", gi cappling 1/2", gi cappling 3/4", gi cappling 1", gi cappling 2", gi cappling 2 1/2", gi cappling 3", gi cappling 4", pvc elbo 6kg 1/2", pvc elbo 6kg 3/4", pvc elbo 6kg 1", pvc elbo 6kg 2", pvc elbo 6kg 2.5", pvc elbo 6kg 3", pvc elbo 6kg 4", pvc elbo 6kg 5", pvc elbo 6kg 6", gi bend 1/2", gi bend 1", gi bend 2", gi bend 2.5", gi bend 3", gi bend 4", gi bend 3/4", pvc bend 4kg 5", pvc bend 4kg 6", pvc bend 4kg 1/2", pvc bend 4kg 3/4", pvc bend 4kg 1", pvc bend 4kg 2", pvc bend 4kg 2 1/2", pvc bend 4kg 3", pvc bend 4kg 4", pvc bend 6kg 2 1/2", pvc bend 6kg 3", pvc bend 6kg 4", pvc bend 6kg 5", pvc bend 6kg 6", pvc tee 4kg 1/2", pvc tee 4kg 3/4", pvc tee 4kg 1", pvc tee 4kg 2", pvc tee 4kg 2.5", pvc tee 4kg 3", pvc tee 4kg 4", pvc tee 4kg 5", pvc tee 4kg 6", pvc tee 6kg 2.5", pvc tee 6kg 3", pvc tee 6kg 4", pvc tee 6kg 5", pvc tee 6kg 6", gi tee 1/2", gi tee 3/4", gi tee 1", gi tee 2", gi tee 2.5", gi tee 3", gi tee 4", pvc end cap 1/2", pvc end cap 3/4", pvc end cap 1", pvc end cap 2", pvc end cap 2.5", pvc end cap 3", pvc end cap 4", pvc end cap 5", pvc end cap 6", gi end cap 1/2", gi end cap 3/4", gi end cap 1", gi end cap 2", gi end cap 2.5", gi end cap 3", gi end cap 4", pvc mta 1/2", pvc mta 3/4", pvc mta 1", pvc mta 2", pvc mta 2.5", pvc mta 3", pvc mta 4", pvc mta 5", pvc mta 6", pvc pta 1/2", pvc pta 3/4", pvc pta 1", pvc pta 2", pvc pta 2.5", pvc pta 3", pvc pta 4", pvc pta 5", pvc pta 6", saidal piece 2"x1/2", saidal piece 2.5"x1/2", saidal piece 3"x1/2", saidal piece 4"x1/2", saidal piece 5"x1/2", saidal piece 6"x1/2", saidal piece 2"x3/4", saidal piece 2.5"x3/4", saidalpiece 3"x3/4", saidal piece 4"x3/4", saidal piece 5"x3/4", saidal piece 6"x3/4", gi sulisevalue 2", gi sulisevalue 2 1/2", gi sulisevalue 3", gi sulisevalue 4", gi sulisevalue 5", gi sulisevalue 6", flang gi 2", flang gi 2 1/2", flang gi 3", flang gi 4", flang gi 5", flang gi 6", air value 2", air value 2.5", air value 3 ", air value 4 ", air value 5 ", air va
Tender For supply of general items - harpic 750 ml , broom large , colin , air wick sachet , air freshner spray , phenyle white , phenyle black , bamboo stick 8 ft , bamboo stick 20 ft , fawdi for sewer cleaning with iron handle , grinding wheel paper 60 no , pencil cell aa , lancer set , almirah lock , glass silicon , thinner oil , ghadi detergent , black paint , white paint , fevicol , chuna for paint , geru powder , chuna powder , measuring tape 5 mtr , khunt handle wooden , hand grinder bosch , soap dispenser , office dustbin steel , dustbin 60 ltr , goggles for welder black , hand gloves rubber , tow chain belt with hook 75 mm 5 mtr , heavy duty tool box multipurpose , hedge cutter machine , right angle , wrench pana 12 inch adjustable , wrench pana 14 inch adjustable , tower bolt , abro tape , surf excel surf top load , bhc powder , pvc nylon wire for brush cutter , mop set , curtain patti , curtain bracket , ss wire mesh , phool jhadu , wiper , welding rod , white cement , plywood 19mm sainik waterproof , plywood 12mm sainik waterproof , plier taparia , screw driver 4 cut taparia , hexa frame , pvc nail clip 8 mm , pvc nail clip 10 mm , pvc nail clip 25 mm , 2 core wire havells , havells wire 0 point 75 mm 2 colour , havells wire 1 mm 2 colour , havells wire 1 point 5 mm 2 colour , mccb 100 amp 4 pole , mccb 200 amp 4 pole , mccb 400 amp 4 pole , fm 1 timer , fan regulator socket type anchor , fan capacitor 2 point 5 mfd , grass pad for desert cooler , pvc gang box 2 plus 2 , led light 30w bajaj , led tubelight 20w phillips syska , pvc casing 1 inch , power plug gang box 16 amp anchor , gi union 1 2 inch , gi union 1 , gi nipple 1 2 inch x2 inch , gi nipple 1 2 inch x 6 inch , gi socket 2 inch , float valve cock 1 2 inch set , pvc waste coupling , cp jali 2 inch , cp jali assorted 5 types , gi socket 1 2 inch , gi socket 1 inch , teflone tape , pillar cock head half turn , gi axe nipple 1 2 inch , pvc solvent , pvc elbow 110mm , pvc elbow 63mm , pvc socket 63mm , cpvc pipe 1 2 inch , iron trunk 3x3x6 , foot mat rubber red , green net , iron cut kabja , cloth hanger iron
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi