Latest cs trash plate Tenders | Government cs trash plate Tenders

Central Government/Public Sector

CTN :40494517

17 Jun, 2025 NA

Mehsana - Gujarat

Tender For supply of ms structural plate as per is 2062 (unit - quantity) (q3) , steel chequered plates as per is 3502 (unit - mass) (q3) , hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 (q3)

Corporations And Associations And Others

CTN :40374730

03 Jun, 2025 NA

Jalandhar - Punjab

Tender For corrigendum : supply of machinery spares - supply of machinery spares, c.s. trash plate machined confirming to is-1030 grade 23/45. free from blow holes .as per drg., grooving as per drg.-1020-mh-0402-01-171(rate should be quoted lum sum)( mill no. 1 ), drilling as per drg. ----------do---------(rate should be quoted lum sum)( mill no. 1 ), grooving as per drg. bcsm/mh/113 (mill no. 2 )(rate should be quoted lum sum), drilling as per drg. ----------do--------- (mill no. 2 )(rate should be quoted lum sum), grooving as per drg. bcsm/mh/112 (mill no. 3)(rate should be quoted lum sum), drilling as per drg. ----------do--------- (mill no. 3)(rate should be quoted lum sum), grooving as per drg. bcsm/mh/112(mill no. 4)(rate should be quoted lum sum), drilling as per drg. ----------do---------(mill no. 4)(rate should be quoted lum sum), mill no.1c.s. scraper with machining as per drawing 1020-mh-0402-01-255 & 256, grooving of top scraper as per drg.1020-mh-0402-01-256(rate should be quoted lum sum), grooving of discharge scraper as per drg.1020-mh-0402-01-255(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.2m.s. scraper with machining as per drawingmh-ts-02-r1, grooving of top scraper as per drg. ----------do------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), m.s. scraper with machining as per drawing mh-ds-02-r1, grooving of discharge scraper as per drg. ----------do---------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.3&4m.s. scraper with machining as per drawing mh-ts-03-r1, drilling as per drg.- ------do--------(rate should be quoted lum sum), grooving of top scraper as per drg.- ------do--------(rate should be quoted lum sum), m.s. scraper with machining as per drawing mh-ds-03-r1, grooving of discharge scraper as per drg.- .------do--------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.2,3 , pitch 50mmm.s. scraperwith machining as per drawing(grpf pressure shoot), grooving of top scraper as per drg. bcsm /mh/015 (rate should be quoted lum sum), grooving of bottom scraper as per drg. bcsm /mh/016 (rate should be quoted lum sum), drilling as per drg.(rate should be quoted lum sum), mill no. 4, pitch 40mmm.s. scraperwith machining as per drawing(grpf pressure shoot), grooving of top scraper as per drg. bcsm /mh/017 (rate should be quoted lum sum), grooving of bottom scraper as per drg. bcsm /mh/018 (rate should be quoted lum sum), drilling as per drg. (rate should be quoted lum sum), c.s crown pinion confirming to is-1030 grade 23/45 free from blow holes and proof machine as per drg., mill no.1 as per drg.(rate should be quoted lum sum), mill no.2,3&4 as per drg.(rate should be quoted lum sum), cane cutting knives, cane cutting knives made from shock resistance ms plate 25 mm thick confirming to is-2062. and tested at hardness-500 bhn tensile-65 kg/mmyield strength-50 kgf/mm elongation-20 % minwith proper heat treatment to avoid breaking the knives. as per drawing no. 1020-mh-0303-1700-105with hard facing, cane cutting knives made from shock resistance ms plate 25 mm thick confirming to is-2062. and tested at hardness-500 bhn tensile-65 kg/mmyield strength-50 kgf/mm elongation-20 % minwith proper heat treatment to avoid breaking the knives. as per drawing no. 1020-mh-0303-1-105with hard facing, c.s trash beam, c.s trash beam as per drg.bcsm/mh/0164

Central Government/Public Sector

CTN :40343961

30 May, 2025 62.82 Lacs

Kollam - Kerala

Tender For corrigendum : tender for supply of structural steel as per scoc - plate ms 12mm thick 1500x6300mm , ms angle isa 75x75x8mm , beam ms 300x140mm , ms joist 150x75mm ismb , ms angle 65x65x6mm , ismc 100x50mm , beam ms 200x100mm , ismc 150x75mm , ismc 125x65mm , ismc 200x75mm , ismb 100x75mm , joist beam ms 125x75mm , ismc 75x40mm , beam ms 350x140mm , plate ms 10mm thick 1250 x 5000mm , ms flat 25x6mm thick , angle ms 100x100x10mm , ms flat 100x12mm , angle ms 90x90x8mm , ms angle 50x50x6mm , ms angle 40x40x5mm , beam ms 250x125mm , ms angle 25x25x5mm , plate ms 16mm thick 1500 x 6300mm , plate ms 6mm thick 1250 x 5000mm , plate ms 8mm thick 1250 x 5000mm , flat ms 50x06mm , ms flat 25x4mm , ms sheet 3.15mm thick 1250 x 2500mm , ms sheet 2mm thickness 1250 x 2500mm

Central Government/Public Sector

CTN :40091162

03 Jun, 2025 1.30 Crore

Ganjam - Odisha

Tender For corrigendum : supply of design, manufacturing, supply of dg set of 500 kva rating for site conditions as per annexure 1 , supply of emergency switch board as per annexure - 2 , supply of lighting distribution board and power distribution board as per annexure - 3. , supply and installation of led lights , supply of structural steel - ms equal angles, isa 50 x 6mm , ms plate-3.15 mm of either tata steel, jindal steel, rinl, sail make only. supply of gi pipes etc , charges towards installation and commissioning of dg set as per the scope of work attached. , supply and installation of auto changeover switch as per the scope of work attached herewith. , fabrication of structural steel along with painting the structures as per scope of work , shifting of cables from central stores and laying of cables over cable trays and binding the cables on the cable trays with cable tie as per scope of work , shifting of amf panels, esb,ldb and pdb panels and its accessories as per the scope of work

CTN :40423805

31 May, 2025 NA

Darjeeling - West Bengal

Tender For construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter & battery

CTN :40389042

09 Jun, 2025 NA

Kolkata - West Bengal

Tender For construction of artificial rock climbing wall cum slithering platform in garrison battalion ground - earth work in excavation by mechanical means hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering , providing and laying in position specified grade of reinforced cement concrete , brick work with burnt clay fps non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand , 12mm thick cement plaster 1ratio4 , filling available excavated earth excluding rock in trenches plinth sides of foundations , supplying and filling in plinth with jamuna sand under floors including watering ramming consolidating and dressing complete , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars , supplying of m s bolts round holding down of anchor boltds with nuts and washer plates complete , structural steel work , providing and fixing ms chequered plate 5mm thick , providing and fixing 0dot8mm thick colour coated sheet for shed , designing providing and fixing frp 3d panel with minimum 6 mm thickness at center and 10 mm at flanges , providing and fixing ss top belay bar , movable climbing holds , providing seat harness , static rope 10 mm , carabiner , providing bracket fdotodot8 bracket , providing mitton , gri gri , providing quick draw , 30mm manila rope bid number/ & ( * ) : gem/2025/b/6191380 dated/ + : 18-05-2025 bid document/ 3 3 1 / 19

CTN :40187612

24 May, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of 4 thk corrosion resistant steel sheet to spec: irs: m41-97 gr-1 , corrosion resistant steel plate 6 thk to spec: irs m-41-97, gr-1 , corten steel plate 8mm to spec irs m-41/97 gr 1 , corten steel plate 10mm to spec irs m-41/97 gr 1 , 38 mm thick structural steel with improved atmospheric corrosion resistance to specn en 10025-5 2004 , 50 mm thick hot rolled structural steel, to size 50mm to grade en 10025-5 s355j2w+ n, ut as per astm , 60 mm thick structural steel with improved atmospheric corrosion resistance to specn en 10025-5 2004

Central Government/Public Sector

CTN :40422895

06 Jun, 2025 NA

Mumbai - Maharashtra

Tender For manufacture and supply of fabricated anticreep device for 10125 mm curved switches with zu-1- 60 thick web tongue rails b.g. (1673 mm) for 60 kg (uic) on psc sleepers as per rdso drg. no. rds o/t-878 2 & rdso/t-8783 complete with fittings (including 27 mm dia. hts bolt with nut to drg. no. rdso/ t-8786 & rdso/t8787 and hardened packing plate to drg. no. rdso/t-8784 & rdso/t-8785) acd material shall be structural steel confirming to the requirement of grade e-350/br of is: 2062-2011 "indian standar d hot rolled medium and high tensile steel - specification" (seventh revision). notes : (i) the 27 mm dia h ts bolt and nut shall be confirm to is :3757 & is:6623. the dimension of of hts bolts and nuts shall be as p er drawing no. rdso /t8786 & rdso/t-8787 . these bolt and nuts are shall be arranged and supplied by th e suppliers /tenderers . (ii) hardened packing plate shall confirm to is : 6649 and material 45c8 steel accor ding to is:1570 (part 2). the dimension of hardened packing plate shall be as per drawing no. rdso/t8784 & rdso/t-8785. hardened packing plate shall be arranged and supplied by the suppliers /tenderers . (the alteration in drawing and specifications issued by rdso up to one month prior to tender opening date shall be applicable to this tender.) [ warranty period: 30 months after the date of delivery ]

CTN :39015996

23 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For bid to ras supply of item 1-6250 x 1250 x 3mm thk. hot rolled structural steel (mild steel) plate astechspecannexattached , item 2- 6250 x 1250 x 6mm thk. hot rolled structural steel (mild steel) plateastechspecannexattached , item 3 - 6250 x 1250 x 8mm thk. hot rolled structural steel (mild steel) plateastechspecannexattached

CTN :40241143

28 May, 2025 NA

Hooghly - West Bengal

Tender For supply of and as directed. , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia laid in trenches , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 10 16 sqmm and testing after jointing , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 25 50 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70 150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 40 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc from any type of panne , 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc. complete all as specified and as directed. , single core stranded copper conductor frls of size 16 sqmm including copper lugs at both ends , single core stranded copper conductor frls of size 10 sqmm including copper lugs at both ends , aluminium busbars electrolytic grade of as per site required amps and ka rating bus bars with ryb and black colour coding including drilling , s and f of framed work as in doors or gates of angle or other section with gusset plates rails braces etc. , m and l for cross arms bracings supports clamps and back plates fabricated from structural steel sections includings nuts bolts washers , m and l for cement concrete 1 3 6 type c 2 using 40mm graded crushed stone aggregate as in pole foundation filling and mass concrete complete all as specified , m and l for cement concrete 1 2 4 type b 1 using 20mm graded crushed stone aggregate as in coping of pole including weathering slightly rounded or chamfered , m l brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build , m and l for 15mm thick in cm 1 4 rendering on brick or concrete surfaces finished fair and even on wall complete all as specified and directed. , m and l for hardcore of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface as specified and directed. , m and l ss pasivated screw bolts machine made with hexagonal head at one end and screwed the other ends each screwed end to be fitted with washers , m and l for preparation of existing surface of lt panel by srapping down peeled off old bid details/ 2 / 38 paint cleaning etc , supply and fix metal cable route indicator of height 750 mm ms flat of 40 mm x 4 mm with circular 100 mm , taking down dismantling of unserviceable lt panels complete all as specified and directed by engineer in charge. , s and f led flood light 60 watt min 230 v ac outdoor type w

Cs Trash Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector