Latest cup filling machine Tenders | Government cup filling machine Tenders

CTN :43046372

24 Dec, 2025 NA

Karwar - Karnataka

Tender For carrying out through usfd testing of running rails, welds , including level crossings, lead portion of points and crossings and scabbed rail testing of all types of rails by nbc (need based concept) method under traffic conditions as per provisions of ir's usfd manual and specifications for ultrasonic testing of rails and welds with latest correction slips and related instructions, duly marking defects, submission of daily reports and storing back up data as specified and directed with contractor's usfd machine. the srt/drt machine should have minimum of 9 probes (including 37 degree forward/backward probe) with b-scan facility for detecting bolt hole cracks in senior regional engineer, karwar region of konkan railway between km 378/100 to km 739/760. (computer no. 62781) (rate quoted shall be excluding gst. gst will be payable as applicable).

CTN :43030571

20 Dec, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of automatic uv laser marking machine

Central Government/Public Sector

CTN :43034069

20 Dec, 2025 NA

Bhilai - Chhattisgarh

Tender For installation of bar code/ qr code marking machine at normalizing area of plate mill of bhilai steel plant.

Private Sector

CTN :43037367

16 Dec, 2025 58.50 Lacs

Mumbai - Maharashtra

Tender For auction sale of plant and machinery - plant and machinery ;mineral water plant comprising of bottle filling machine, jar filling machine, cup filling machine, blow molding machine, conveyor system, r. o. plants, chilling plant, shrink wrapping machine, storage tanks, air compressors, laboratory equipment’s etc.

Private Sector

CTN :43037368

16 Dec, 2025 3.52 Crore

Mumbai - Maharashtra

Tender For auction sale of land with building and machinery - description of property iall that piece or parcel of industrial land or ground along with structure thereon together with the messages, hereditaments, bearing following gut nos.gut no 213hissa no 1area in h.r 0-60-0village kondhalesituated, lying and being at revenue village kondhale, taluka-wada, dist. thane, registration sub-district of thane in area of kondhale gram panchayat.description of property iiall that piece or parcel of industrial land or ground along with structure thereon together with the messages, hereditaments, bearing following gut nos.gut no 214hissa no 5area in h.r 0-03r-05pvillage kondhalesituated, lying and being at revenue village kondhale, taluka-wada, dist. thane, registration sub-district of thane in area of kondhale gram panchayat.description of property iiiall that piece or parcel of industrial land or ground along with structure thereon together with the messages, hereditaments, bearing following gut nos.gut no 420hissa no -area in h.r 0-18r-05pvillage usarsituated, lying and being at revenue village usar, taluka-wada, dist. thane in registration sub-district of thane in area of usar gram panchayat.plant and machinery ;mineral water plant comprising of bottle filling machine, jar filling machine, cup filling machine, blow molding machine, conveyor system, r. o. plants, chilling plant, shrink wrapping machine, storage tanks, air compressors, laboratory equipment’s etc.

CTN :42672824

04 Dec, 2025 NA

Lohit - Arunachal Pradesh

Tender For bid to ras supply of isi mark , file triangular 4 inch material high carbon steel with wooden handle with isi mark , file triangular 6 inch material high carbon steel with plastic handle comma hand tools for grinding on glass comma stone comma marble comma rock comma bone and 120 grit with isi mark , file triangular 8 inch with handle material high carbon steel teeth precision cut teeth with isi mark , file triangular 10 inch material high carbon steel with handle with isi mark , file triangular 12 inch material high carbon steel with handle with isi mark , hammer 250 gm hammer dream fort fiber soft touch curved claw hammer curved claw hammer zero pt 25 kg , mason planer or gurmala material mild steel with handle size 5 inch x 10 inch , mason square 12 inch x 8 inch material stainless steel with isi mark , mason trowel 6 inch material iron with wooden handle , mason trowel 8 inch material iron with wooden handle , mason thread good quality material cotton , oil stone 6 inch x 2 inch combination sharping stone 6 inch length 2 inch berth knife sharping stone grey aluminum oxide 120 comma 240 grit , planer electric planer 650w motor max 2 pt 6 mm cutting depth 82 mm planning width lightweight and powerful optimised chip ejection with isi mark , plumbob 6 ozes oblique 170 gm material cast iron , palm router no load speed 33000 rpm voltage 220 dash 240 v power 550 w collet size 6 mm oblique 1 by 4 inch with isi mark , portable arc welding transformer machine alongwith positive cable negative cable , road marking machine , soldering iron with isi mark , sprit level 10 inch long professional durable aluminum frame magnetic spirit level precision tool with easy to read markings from multiple positions , tiles cutter blade 6 inch material steel shape round no of teeth 12 with isi mark , vernier callipers digital measurement range mm 0 dash 152 pt 4 mm resolution mm 0 pt 01 mm accuracy plus or minus 0 pt 03 mm graduation 0 pt 02mm with isi mark , welding safety goggles , wax for all carpenter work , wood cutter machine 5 inch 1400 watt volt 230 dash 5ohz watt 1350 rpm no load amp 2 cutting cap 39mm with isi mark , zig zag machine electric jigsaw 450w 3100 spm 65 mm adjustable stroke rate double insulation variable speed selection lightweight 1 pt 9 kg plus 1 x jigsaw blade and key with isi mark

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

CTN :42948763

06 Dec, 2025 NA

Katni - Madhya Pradesh

Tender For sports items - sports items, mallakhamb pole (12 feet) [approved by mfi], volleyball pole (adjustable) [metco/ktr/zdgao/vixen], hockey goal post (movable) [metco/vinex/koxtons], hockey goalkeeper kit [alfa/flash/ 55 pieces], cricket practice net with pole [metco/vinex/venky], athletics running hurdle [metco/metis/vinex], adventure sports net (15x30 feet) [standard quality], gazebo canopy tent (10x20 feet) [standard quality], badminton racket [yonex muscle power 29 carbon graphite strung/ li-ning air force g3 - 77 grams/ blaze 100 84 grams], badminton plastic shuttle cock (yonex) [yonex mavis 350], manual dry line ground marking machine [standard quality], handball post (movable) [metco/vinex/ koxtons], handball net [vixen/ raisco/ supreme], handball ball size 03 [nivia/ spartan/vixen], handball ball size 02 [nivia/ spartan/vixen], dumbbells steel 05 kg each [standard quality ], skipping rope [nivia/vinex/ vector x], swiss ball (gym ball) [vector x/ lifelong/ strauss], kettleball for gym (10kg) [standard quality], kettleball for gym (16kg) [standard quality], kettleball for gym (20kg) [standard quality], almirah [standard quality], ab roller [boldfit/ elko/ lets play]

CTN :42968012

18 Dec, 2025 NA

Darjeeling - West Bengal

Tender For tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w