Latest cup washer Tenders | Government cup washer Tenders

Central Government/Public Sector

CTN :41514639

15 Sep, 2025 NA

Bhusawal - Maharashtra

Tender For supply of set of miscellaneous items for earth ret [set of miscellaneous items for earth return brush holder assembly of 3 phase locomotive as per spec. no. clw/es/3/0017 alt `d and clw drawing no. clw/es/3/sk-1/0017/d as follows 1) insulating bush-1 (item no. 3), qty - 500 nos., 2) insulating bush-2 (item no. 4), qty - 500 nos. 3) verbus rip screw m10 x 20 mm along with plain and spring washer (item no. 7), qty - 50 nos., 4) hexagonal bolt m6 x 16 mm along with plain and spring washer (item no. 8), qty - 50 nos., 5) safety nut (nylock) m10 (item no.13), qty - 200 nos., 6) locking screw m10 x 48 mm (item no.11), qty - 200 nos., 7) inbus rip screw m8 x 20 mm (item no. 6), qty - 500 nos. one set consisting of 07 items in 2000 nos. material to be procured from clw approved sources only as per clw item id -2100414. ]

CTN :40218057

22 Aug, 2025 NA

Goa - Goa

Tender For bid to ras supply of disc , lead assembly black , housing magnet assembly , brush holder , connector , stud fastner , brush electrical contact (carbon brush) , pin , nut , screw , fuse , re-cell 12v connecting cable rb85a , nut , re-cell 4v connecting cable rb85a , gasket , battery for ins gps , strap , spring , cap fuel filter , motor assembly dc , cover gasket , scraper ring , solid rivets , bulb , bearing ball , screw , nut , fuse incl. housing , lead assembly black , insulator plate , washer insulating , flash disk , inductor , sleeve ring , o ring , o-ring , armature , brush and spring assembly , screw , spring support rod , rotor assy-tacho , bushing , bolt , race , bolt , bearing ball

CTN :41477864

08 Sep, 2025 NA

Bardhaman - West Bengal

Tender For supply of cable, 1.1kv,2 core, copper, pvc, 1.5mm2 , discharge rod 11kv,2meter, pvc handgrip , insulating rubber mat 33kv 3 feet x6 feetx 0.5 inch , blow down valve, cast steel, flanged type, size-2.5 inch with ibrtc , pressure gauge,0- 300psi , m.s.bend 6 inch , seamless, heavy duty, 90 degree bend , safety slogan board, retro reflective, size 36 inch x48 inch , ht bolt and nut, with washer, m12x150 , pvc adhesive tape, 69kv,25mmx30mtr , pvc non adhesive tape 25mmx25meter , 150mmx3mmx10mtrrs vulcanising tape, 3.3kv , cleaner, crc-226, 500ml pack , m-seal hot compound with hardner, 3.3kv , angle grinder, 600w, 230volt, 100mm wheel, 12000rpm , auxiliary contactor 24volt

State Government

CTN :41356585

21 Aug, 2025 1.50 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of hex nut bolt m-12, leather cup washer and ball bearing 6204 etc in division store jhalrapatan under hand pump maintenance work.

CTN :41392571

15 Aug, 2025 30.00 Lacs

Pratapgarh-Raj - Rajasthan

Tender For 04-nagar parishad me vidhyut samagri supply karne ka karya dist. pratapgarh - as per ruidp sor 2023, supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.90 % purity copper, class 5 stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rating as per is:3961 part 5, in existing surface or recessed pvc/ ms conduit/casing capping making connections with copper lugs of suitable size, ferrules,testing etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr 1 x 1.5 sq.mm, 2 x 1.5 sq.mm, 3 x 1.5 sq.mm, 4 x 1.5 sq.mm, 1 x 4.0 sq.mm, 2 x 4.0 sq.mm, 1 x 10.0 sq.mm, p/laying isi marked p.v.c. insulated submersible cable confirming to(is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.90 % purity copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rating as per is:3961 part 5, existing pipe / open trench / cable tray / on surface including making connection etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 4.0 sq.mm 3 core flat / round, 6.0 sq.mm 3 core flat / round, supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 4.0 sq.mm, 6.0 sq.mm, 10.0 sq.mm, supplying and fixing of power plug point with modular accessories as per pwd specification for electrical works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of isi marked modular 16 amp. switch (is :3854) and 6/16 amp. socket outlet (is:1293) making connection , testing , etc. as required. for specification of wiring accessories refer chapter-56 related item & for additional technical parameters of product / work refer annexure a attached with this bsr, p & f phenolic laminated sheet 2.0 mm thick of following size . including screws, cup washer as required.for additional technical parameters of product / work refer annexure a attached with this bsr 100 mm dia., providing & fixing of 240/415 v ac mcb with positive isolation of 10 ka breaking capacity (b/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a & above rating including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab type test reports & all as per pre approved by engineer incharge. for additional technical parameters of product / work refer annexure a attached with this bsr single pole mcb (with b/c curve tripping characteristics) 0.5 a to 5 a rating, 6 a to 32 a rating, double pole mcb(with b/c curve tripping characteristics) 6 a to 32 a rating, triple pole mcb (with b/c curve trippingcharacteristics) 6 a to 32 a rating, 40 a rating, four pole mcb (with b/c c

CTN :41406859

03 Sep, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For development of 47 types of metal and rubber spares for spv - nut m12 (sr6001d-5915-70:m12-7h-4), development charges, nut m8(sr6001d-5915-70:m8), development charges, nut m24(r6001d-9064-69), development charges, nut m10(sr1199d-5927-70:m10-64), development charges, ring rubber round(sr6001d-(p)c-41-8-3-3-3012), development charges, washer(sr6001d-11371-78:10), development charges, stem rod(sr6001d-577-21-584), developement charges, pin(sr6001d-577-30-1009), developement charges, spring(sr6001d-935-35-183), developement charges, spring (sr6001d-935-45-224), developement charges, gasket copper(sr6001d-938-01-020-4), developement charges, gasket copper(sr6001d-938-01-020-5), developement charges, nb lock washer(sr6001d-stc-877ekm-174), developement charges, nb lock washer(sr6001d-stc-877ekm-177), developement charges, nb lock washer(sr6001d-stc-877ekm-178), developement charges, valve shut off(sr6001d-523-35-13913), developement charges, spring(sr6001d-935-35-256), developement charges, spring (sr6001d-935-36-128), developement charges, spring(sr6001d-935-67-120), developement charges, plug pn160(sr6003d-itshl-718022-005-02), developement charges, ring for indicators installations (kl 14) (sr6003d-ring-7(b)(s)-321-376), developement charges, bolt m6(sr6003d-8(b)(s)-922-216), developement charges, bolt m6(sr6003d-8(b)(s)-922-216-03), developement charges, bolt m6(sr6003d-8(b)(s)-922-216-06), developement charges, nut (sr6003d-8(b)(s)-946-619), developement charges, lock washer(sr6003d-8(b)(s)-951-032), developement charges, washer(sr6003d-8(b)(s)-951-081), developement charges, bolt m6(sr6003d-bolt-8(b)(s)-922-216-02), developement charges, lining gasket(sr6003d-7(b)(s)-150-406), developement charges, jointing strip(sr6003d-8(b)(s)-150-005), developement charges, spring(sr6003d-8(b)(s)-281-022), developement charges, spiral(sr6003d-8(b)(s)-598-000), developement charges, washer(sr6003d-924-61-017), developement charges, disc spring(sr6003d-2-2-2-70x40x4-0x1-5), developement charges, ring(sr6003d-(g)o(s)(t)-13942-86), developement charges, ring(sr6001d-ct-54-41-5), developement charges, additional washer(sr6003d-8(b)(s)-711-001), developement charges, insulating washer(sr6003d-8(b)(s)-715-065-03), developement charges, lining gasket(sr6003d-8(b)(s)-763-444-01), developement charges, tube(sr6003d-8(b)(s)-770-199-18), developement charges, gasket(sr6003d-c26123-1-100-16), developement charges, gasket(sr6003d-i-65x55x2), developement charges, gasket(sr6003d-itshl-754072-052-26), developement charges, protection washer(sr6003d-itshl-754113-001-49), developement charges, protection washer(sr6003d-itshl-754113-001-17), developement charges, protection washer(sr6003d-itshl-754113-001-25), developement charges, washer(sr6003d-924-36-071-47(w)), developement charges

Central Government/Public Sector

CTN :41362164

28 Aug, 2025 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps, chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm diameter, 2 inch length, temperature sensor with digital display, k. type, 0-1250 c, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 cm diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m, copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20 ft, galvanized iron pipe b class diameter: 3/4 inch, length: 20 ft, stainless steel 304 ball valve diameter: 1.5 inch, stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 ball valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 1/2 inch, metal cutter grinder disc, pack of 10, grit number 220 diameter:, 4 inch, grit material: aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4, diameter:, 4 inch, grit material: aluminium oxide, flap disc. pack of 10, grit number 80, diameter: 4 inch, grit, material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: 4 inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resistant gloves, material: leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size: l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mm bore, step down transformer, 220v ac to 12-0-12 v, 1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, bta16-600b triac, 600v, 16a, switch, sw-spst, in4007 diode, 100kv, ia, bldc motor with compatible e-bike controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 13s 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 m length, silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 а., power rocker switch, voltage rating: 24 vdc, current rating: 14 ma, 19mm size red power symbol led s.s. momentary type push button switch 5v-24v dc, potentiometers 100 k ohm, potentiometers 1 m ohm, relay module- (ssr-2 channel

Central Government/Public Sector

CTN :41372688

25 Aug, 2025 NA

Erode - Tamil Nadu

Tender For supply of o/h kit for support rod assembly of ir03h pantograph each set consisting of 09 items (10 nos). (1) support rod contransys pt. no-c0h1580 = 1 no. (2) pin for support rod, contransys pt. no-c0h1590=1 no. (3) insulating washer, contransys pt. no- c015650= 02 nos. (4) spring, contransys pt. no- c0h15660 = 1 no.(5) end cap bush contransys pt. no-c015670=1 no. (6) maintaining washer, contransys pt. no-c015680= 1 no. (7) maintaining washer, contransys pt. no- c015690=1 no. (8) circlip b-26,contransys pt. no-c0156100=1 no. (9) circlip b-15, contransys pt. no-c0156110 = 1 no.

Central Government/Public Sector

CTN :41099817

22 Aug, 2025 NA

East Khasi Hills - Meghalaya

Tender For corrigendum : supply of rd 30 drilling machine spares - flange spare, chuck jaw bw, rh (set of 4 pcs.), chuck jaw bw, lh (set of 4 pcs.), bushing chuck (set of 4 pcs.), screw chuck (set of 4 pcs.), quill drive, gear bevel, key drive (set of 3 pcs.), u-cup spares (set of 4 pcs.) (hydraulic cylinder bucket), , gear spur cluster, gear shaft input, gear sliding, , shaft inter gear, , spacer bearing, , washer thrust (set of 2 pcs), ball bearing (input shaft), ball bearing (input shaft), roller bearing(cluster gear) (set of 3 pcs), pinion bevel(for nw head), circlip light, band assembly clutch, band assembly brake, balance piston relief valve, hydraulic pressure gauge 1000psi, hydraulic filter complete set, p.t.o assembly, valve restrictor assembly, input shaft oil seal, hydraulic pump for rd-30, feed control valve for rd-30, four way valve, v-packing (cylinder v-packing), rod wiper, quill oil seal, quill oil seal, hydraulic chuck jaw for bw drill rod, (set of 5 pcs.), chuck jaw hw bw, rh (set of 4 pcs.), chuck jaw hw bw, lh (set of 4 pcs.), gear bevel, pinion bevel, quill oil seal, quill oil seal, quill oil seal, hydraulic chuck jaw for bw drill rod (set of 4 pcs.), valve seat, ball valve, liner/ cylinder, plunger cup, plunger cup washer, nut plunger cup, nut hexagonal, packing plunger cup, gasket cylinder head, gasket valve head, gasket cylinder, rod plunger, taper roller bearing, ball bearing counter shaft, oil seal, gasket head cylinder, gasket head valve, liner/cylinder, gasket for cylinder, plunger cup, packing plunger cup(bucket), washer plunger cup, nut plunger cup, nut hexagonal, lock washer, oil seal packing, packing plunger rod, follower packing, taper roller bearing (eccentric shaft), ball bearing for counter shaft, oil seal, ball valve, valve seat

Central Government/Public Sector

CTN :41341401

20 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of insulating washer tpu moulded for guage tie-plates as per drg no t-10371 & as per rdso specification no rdso/spn/168/2 005 rev.2 [ warranty period: 30 months after the date of delivery ]

Cup Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector