Latest current tester Tenders | Government current tester Tenders

CTN :42996771

12 Dec, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of acb testing calibration service , ammeter voltmeter meter calibration and testing , thermal relay testing and calibration , earth fault relay testing , over current relay testing , auxilliary relay testing , instantaneous relay testing , ht cable ir testing , lt cable and motor ir testing , rubber mat testing , vcb testing , calibration of multimeter , calibration of clampmeter , calibration of earth tester , calibration of megger , calibration of lux meter , calibration of fluke ir thermometer , battery load test 16 cells , battery load test 32 cells , transformer oil , transformer oil tesing and filtration , tramsformer ir pi test , tramsformer oti wti calibration , tramsformer dfra test , tramsformer partial discharge test , tramsformer sfra test , tramsformer tan delta test , transformer vector group test , transformer polarity test , dga test of transformer oil ) /bid number: gem/2025/b/6950854 * /dated: 01-12-2025 & & / bid document1 / 26

CTN :42401208

04 Dec, 2025 NA

Pune - Maharashtra

Tender For bid to ras supply of multipurpose screw driver set bracket start 9 pcs bracket close , valve die for vehicle tyres , tyre pressure gauge bracket start tc 2 point 5 comma 200psi bracket close , oil filter chain wrench spanner , oil filter wrench heavy duty bracket start adjustable type bracket close , allen key set of 12 pcs bracket start light duty bracket close size 2mm to 14mm , light duty socket set with screw driver kit bracket start 46 in 1 pcs tool kit and screw driver and socket set multipurpose bracket close , welding helmet auto darkening , plier nose 9 inch , combination plier 8 inch , golden star brass bracket start for star plate bracket close , silver star bracket start for star plate bracket close , welding holder 600 amp , electrician tool kit bracket start nos of 16 pcs items bracket close , line tester 9 inch , digital bty cell tester 12v , hydrometer bracket start 0 - 750 bracket close

State Government

CTN :42880237

08 Dec, 2025 99.72 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation divisions belagavi, chikkodi and belagavi rt division coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading. - insulated gos operating handle/rod for redesigned & modified gos, head torch, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, grounding sticks extendable upto 18 ft, frp telescopic discharge rod 16 ft, safety belt, minimum 2 m rope length, protective eye wear for safety with integral hands free led lighting, hi visibility reflective rain wear, hi visibility reflective jacket, gum boots, rain coat with duck back, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest, polypropyline rope of 32 mm dia in kg, polypropyline rope of 26 mm dia in kg, multimeter electronic type, screw driver 12 inches size, screw driver18 inches size, insulated cutting pliers 8 inches size, insulated cutting pliers 12 inches size, rechargeable 5 w led hand torch, adjustabale screw spanner 12inches, adjustabale screw spanner 8inches, screw driver 8inches, rubber sheet, drilling machine portable type, specific gravity testing instrument, earth resistance tester, d.c. volt meter range 3 v to 5 v, sf6 gas leak detector, clamp meter, ac leakage clamp meter (ma) (dcm 10 a), digital multi meter, insulation tester (megger) 500 v, insulation tester (megger) 2.5 kv - 5 kv, transil oil dielectric breakdown testkit, allen keys, telescopic ladder aluminium 6 m height

CTN :42951653

18 Dec, 2025 NA

Shimla - Himachal Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; supply and installation of vocational lab tools & equipment; service provider - knapsack sprayer, grafting kmie, runing secateur, gardening rake, pruning saw, gardening, spade, hammer, soil testing it, drip terigation, gion sprinkler, transparent grafting tape, gunny bads, flower pot, ehuri, germination tra, trowel, watering can, pheromone trap, sheivel, measuring tape, retractable tape meeurs, lipper foot, adhesive backad rulers, wonden tatre fr cloth cutting, brown sheet, dress model, ball pirts, pin cushions, capur peo, taw's cha, tracing wheel, shaare, phiking shaars, seam apper, thread cipper, fabric, neatles thand wwing, air compressor, bench vice, work tables, bench grinder, oil draining & filling equipment, cooling system tester, multi meter, hydro meter, ac clamp meter, coolant tester, battery & charging system testor, all in one eyelash brush/comb, applicator brush, arm chair, barber brush, blackhead remover, facial bowls, brushing machine 10 in 1 vacuum high frequency, complete make up brushes set, crimpers, curling iron, curling rods small medium large, decorative pins boxes, double wax heater, dustbin, foot spa, hair connector, hair cutting comb, hair dryer, hair pins boxes, facial steamer and hair steamer, hand mirrors, high chair, large stools, large tooth comb, rack for holding magazines & books, makeup catalogues, make up palate, manicure set, manicure trolley, markers set as required, measuring cup set, tablet, projector screen, projector, barcode scanner, biometric access, laptop, fire extenguisher, smake detector, desktop, elec spanner set, tds meter, water pressure gauge, radiation leakage tester, water purifier ro, uv and uf tech., water purifier uv + uf, hand gloves, plier, wire stripper, ammeter, electrical tape

CTN :42968012

18 Dec, 2025 NA

Darjeeling - West Bengal

Tender For tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w

CTN :42970156

15 Dec, 2025 NA

Umaria - Madhya Pradesh

Tender For supply of r410 gas , r 32 gas , r 22 gas , lpg gas , lpg , lpg flame , shampoo , copper tube , cotton waste , clamp meter , nitrogen pressure gas , refrigeration oil , capacitor , relay , control board , polyurethine foam , abs plastic , sheet alluminium , copper wire for wiring , silicon chips capacitor , chalk , duster , photocopy paper , file cover , paper pin steel , detergent powder , diode 4007 , transistor , igbt , ujt , led , resistance , mosfet , pcb plate , soldering iron , desoldering pump , solder wire , solder paste or flux , general purpose pcb blanks , copper clad board , conecting wires , carbon film resistors various wattage and resistance values , capacitors different types ceramic, electrolytic, tantalum and voltage capacitance values , diodes general purpose, rectifiers, zener diodes , copper wire , amplifier ic , digital ic ex-nor gate , single phase center tapped stepdown transformer , spst switch , single way switch , two way switch , audio video cable , bnc connector , kit kat fuse , mcb fuse , rj45 connector , sata connector , scr , diac , triac , microcontrollers , battery , regulated ics , timer ic , ic base , dry cells , led bulbs , insulation tape , neon tester , ldr , opto coupler ic , logic gates ic , fip flop ic , counter ic , decoder ic , op amp ic , function generator ic , fm transmitter ic , receiver ic , piezo buzzer , frequency multiplier ic , digital ics , optical fibre cable , ms flate , ms round bar , power hexa blade , cutting tool , ms block , ms gear blank piece , ms gear blank piecce , ms gear blank piece , ms bar , ms sheet , ms filler rod

State Government

CTN :42718791

04 Dec, 2025 70.00 Lacs

Sheopur - Madhya Pradesh

Tender For rate contract award for supply of local purchase items for operation and maintenance of various equipment and various safety material for onm divisions and stm stc division situated under general manager (o n m) mpmkvvcl circle sheopur. - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing

State Government

CTN :42815482

04 Dec, 2025 80.00 Lacs

Gwalior - Madhya Pradesh

Tender For rate contract for empanelment of agencies for supply of local purchase items under juridiction of general manager (city circle) mpmkvvcl, gwalior - trip coil suitable for cgl make vcb without assembly, trip coil suitable for schneider make vcb without assembly, trip coil shunt type 30 volt dc suitable for s&s make vcb without assembly, trip coil , shunt type 30 volt dc suitable for bhel make vcb without assembly, trip coil makes shreem with out assembly, trip coil suitable for erl make vcb without assembly, tripping coil 30 volt dc suitable for 11 kv areva/alstom make vcb, crompton make tripping coil with plunger, tripping coil s&s make 11kv vcb with coller, bhel make tripping coil (10 nos. with plunger), trip coil with plunger for shreem make vcbs, closing coil 30 volt dc suitable for 11 kv bhel make vcb, 11 kv closing coil 3 with assembly suitable for stelmec make vcb., closing coil 30 volt dc suitable for 11 kv crompton make vcb, 11 kv erl make closing coil, closing coil suitable for schneider make vcb without assembly, bhel make closing coil with plunger), schneider closing coil with plunger, expulsion fuse 30 amp, expulsion fuse for 11 kv 121 kvar capacitor unit-40 amp. (t-40), breather with blue silica gel (blue) 2 to 4 mesh for ptr, capacity 3.00 kg, ct clamp with threading in brass bushess 16 mm on 80x45x35 mm. for dog cond. (ct clamp with 35 to 40 mm with threading in brass bushess 16 mm on aluminium portion 80x45x35 mm with 04 nos. gi nut volt suitable for dog conductor), ct clamp with threading in brass bushess 20 mm on 80x45x35 mm .for dog cond. (ct clamp with 35 to 40 mm with threading in brass bushess 20 mm on aluminium portion 80x45x35 mm with 04 nos. gi nut volt suitable for dog conductor), indicating lamp 30 volt dc, tnc switch, digital tong tester (0 to 1000 amp.), bucholz relay for ptr, minimum oil gauge (mog) contacts, brass stud 20 dia suitable for 11 kv bushing, brass stud 20 dia suitable for 33 kv bushing, bi-metallic clamps suitable for 20mm dia stud and 100sqmm aaac, rubberized cork ( gasket) sheet 5 mm, rubberized cork ( gasket) sheet 9 mm, oil temperature indicator (oti), dial 150mm, with capilary, mercury swicth type, winding temperature indicator dial 150mm with capillary, mercury switch type, pad clamp for isolator suitable for panther conductor. ( alluminium pad clamp suitable for dog conductor, bottom portion of pad clamp should be 140x50x15 mm having 06 nos. g.i. nut and bolt for hole size 10 mm and upper portion otf pad clamp should be 70x50x15 mm having 02 nos. g.i. nut and bolt with spring washer for whole size 12mm total weight of a clamp should be 675 gram., rubber conical grommet 12mm for hv bushing., rubber conical grommet 12mm for lv bushing., ladder bamboo 8 to 10 meter (bamboo ladder 24 feet long heaving 2 inch to 3 inch dia at bottom & 1.5 inch to 2.5 inch dia at top of the bamboo, the cross pieces 16 no. i.e. step should be at distance of 16 inch & bamboo ladder should be tightended with gi wire of 16 swg at least four places. the top of ladder should be wide 35 to 40 cms and bottom 58 to 60 cms.), 11kv do fuse unit porceline type, hrc fuse base 100 amp, hrc fuse base 200 amp, hrc fuse base 315 amp, tc fuse wire 8 swg, tc fuse wire 14 swg, al. lugs for 70 sqmm cable. (weight 15 gram approx. +/- 5%), al. lugs for 150 sqmm cable (weight 38 gram approx. +/- 5%), aluminium lugs 95 sqmm (weight 18 gram approx. +/- 5%), aluminium lugs 120 sqmm (weight 20 gram approx. +/- 5%), alluminium lugs suitable for 150 sq. mm.make :-dowell s/action/sharp or any other equivalent make, alluminium lugs suitable for 300 sq. mm.make :-dowell s/action/sharp or any other equivalent make, 11kv vacuum interrupter suitable for stelmec vcbs, vacuum interrupter (bottle) suitable for 11 kv schneider make vcb, screw driver insulated plastic/pvc handle 250mm /10inch, plier combination side cutting 200mm /8 inch (insulated combination plier with joint cutter red color, make- taparia, size 200-210 mm

State Government

CTN :42850748

08 Dec, 2025 38.00 Lacs

Guna - Madhya Pradesh

Tender For corrigendum : rate contract for supply of local purchase items under circle ashoknagar - local purchase, tripping coil 11 kv make crompton, tripping coil 11 kv make scheinder, tripping coil 11 kv make s&s, tripping coil 11 kv make bhel, tripping coil 11 kv make prestine, tripping coil 11 kv make shreem, tripping coil 11 kv make 11 kv small erl, tripping coil 11 kv make alstrom, closing coil 11 kv make bhel, closing coil 11 kv make stelmec, closing coil 11 kv make crompton, closing coil 11 kv make erl, closing coil 11 kv make scheinder, closing coil 11 kv make s&s, expulsion fuse 20 a. for capacitor bank ( for 100 kvar unit ), expulsion fuse 40a for capacitor bank ( for 200 kvar unit ), breather for ptr (capacity- 3 kg.), ct smart clamp for 16/20 mm stud for raccoonn, dog and panthor conductor, cb smart clamp for raccoonn, dog and panthor conductor, c&r panel indicators indicating lamps, tnc switch, mfm (tong tester 27 t meco), bucholz relay, mog, 33 kv stud 20 mm suitable for ptr, 11 kv stud 20 mm suitable for ptr, 33 kv bushing for ptr suitable for 20 mm stud, 11 kv bushing for ptr for 20 mm stud, smart clamp/bimeattalic clamp for ptr bushing stud size 20 mm, rubberized cork seat 4 mm (2 x 3 ft.), rubberized cork seat 10 mm (2 x 3 ft.), oil temperature indicator (oti) , dial 150mm , with capillary, mercury switch type, winding temperature indicator (wti) , dial 150mm , with capillary, mercury switch type, smart t clamp of all sizes, smart pg clamp of all sizes, isolator pad clamp for raccoon & dog conductor, (i) rubber conical washer suitable for 12 mm stud(hv side), (ii) rubber conical washer suitable for 12 mm stud (lv side), bimetalic clamp suitable for dtr 315 kva & 200 kva x-mer flat brass size 60x60x10 mm in central 20 mm hole having joint aluminium section size 60x70x42 mm suitable for 150 sqmm cable 06 ]=sdddno. gi nuts & bolts flat and spring washer weight 0.900 gram (approx.+-5%), bimetalic clamp suitable for 100 kva dtr brass flat pad size of 50x50x6 mm with 16/20 mm hle & other side aluminium pad type clamp pad size 65x60x15 mm each along with 04 nos. g.i. nut & bolt of size 50x6 mm with washer & spring washer suitable for 075/80 mm acsr/aaac conductor, rope polypropylene 22-24/1 inch dia (pole propylene rope size 22 to 24 mm dia make-tufrope isi mark, led street light luminaries 50 watt complete electrical fitting make sharp/heavals/indium/ syska/lux nd lumen/ikma or others equilent make with guaranty/ warranty 2 year., hrc fuse for different capacity of dtr 100 kva, hrc fuse for different capacity of dtr 200 kva, hrc fuse for different capacity of dtr 315 kva, hrc fuse base for different capacity of dtr 100 kva, hrc fuse base for different capacity of dtr 200 kva, hrc fuse base for different capacity of dtr 315 kva, contract free volt light indicator voltage rang 90 to 1000v frequency 50 hz display by led flashing & beep sound, piercing connector suitable for size 95-150/160 sqmm pvc cable, transformer reapairing cork sheet packing kit complete (26 no.item), ct clamp with 35 to 40 mm threading in brass bushes 20 mm on aluminium portin 80 45 35 mm with 04 noss. g.i. nut bolt suitable for dog conductor, ct clamp with 35 to 40 mm threading in brass bushes 16 mm on aluminium portin 80 45 35 mm with 04 noss. g.i. nut bolt suitable for dog conductor, lv brass stud size 260x20 mm complete set suitable for 200 kva / 300 transformer set comparising of brass stud 265x20 mm -01 no, brass hexa nut full thered -01 no, brass lock nut-02 no, brass rear nut-02 no sealing ball washer 01 no. and brass plain washer -02 no., 33 kv vacuum interrupter stelmec, 33 kv vacuum interrupter scheinder, big gear for 11 kv vcb (stealmec), t.c fuse wire for 3.15 & 5 mva & 8 mva, 11 kv vacuum interrupter stelmec, 11 kv vacuum interrupter scheinder, screw driver 10 inch.make taparia, small gear for 11 kv vcb (stealmec) small gear assly, repairing of numerical relay 30 valts (over current/earth faut

Central Government/Public Sector

CTN :42931536

17 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of misc lab consumables items d d-- soldering irom , soldering stand , small screwdriver , wire cutter , hacksaw , extension board , ic tester machine , digital voltmeter for bread board , digital ammeter for bread board , scientific calculator , battery connector of bread board , jumper wire male to male , bread board wire , a to b cable , usb male to female cable , pcb for soldering practice , perforated pcb , bread board , bread board power supply , mercury vapour lamp , sodium light bulb , green laser light , red laser light , ppt pointer , ic 7400 nand , ic 7402 nor , ic 7404 not , ic 7408 and , ic 7410 triple 3 input nand , ic 7432 or , ic 7486 xor , ic 7474 dual d flip flop , ic 7478 jk flipflop with clear and preset , ic 7430 8 input nand , ic 74266 quad xor and nxor with open collector outputs , ic 741 op amp , ic 358 dual op amp , 555 timer , ic 7805 voltage regulator plus 5v , ic 7905 voltage regulator minus 5v , ic 317 adjustable voltage regulator , uln 2803a darlington transistor array , dac mcp4921 digital to analog convertor , comparator generic or specific ic , multiplexer , demultiplexer , 16 pin ic casing , 8 pin ic casing , cnc shild for arduino , rotary encoder for arduino , current sensor for arduino , photo diode , tracing paper , insulation tape , hand wash refile , 256 gb pen drive , mouse pad , chart paper different color , scale plastic 12 cm , eva sheet a4 different color , pencil , paper cutter , small electric motor , cycle walto , set square both type small size coloured , a3 size drawing sheet , joot rope , a4 size drawing sheet , pen drive , hdmi to vgi connector , a4 size different colour sheet , black sheet , oil pastel colour , collered pencil , pastel pencil different colour , loose pebbles different colour , marble , plastic or wooden sticks 12cm height each , 3d shapes different size , seizer big size , seizer small size , mirror , scrap paper big size , scrap paper small square size , forex sheet 2x2 feets , office bag , water dispenser , first aid kit , hats , gents shoes , sari of various states marathi south indian assami kolkata , mop and backet , doormat soldering irom specification not available, soldering stand specification not available, small screwdriver specification not available, wire cutter specification not available, hacksaw specification not available, extension board specification not available, ic tester machine specification not available, digital voltmeter for bread board specification not available, digital ammeter for bread board specification not available, scientific calculator specification not available, battery connector of bread board specification not available, jumper wire male to male specification not available, bread board wire specification not available, a to b cable specification not available, usb male to female cable specification not available, pcb for soldering practice specification not available, perforated pcb specification not available, bread board specification not available, bread board power supply specification not available, mercury vapour lamp specification not available, sodium light bulb specification not available, green laser light specification not available, red laser light specification not available, ppt pointer specification not available, ic 7400 nand specification not available, ic 7402 nor specification not available, ic 7404 not specification not available, ic 7408 and specification not available, ic 7410 triple 3 input nand specification not available, ic 7432 or specification not available, ic 7486 xor //bid details2 / 62

Current Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector