Latest curved switch Tenders | Government curved switch Tenders

Central Government/Public Sector

CTN :44573955

15 Apr, 2026 NA

Thane - Maharashtra

Tender For bid to ras supply of video wall and interactive smart board : - 105 or 110 inch interactive panel , i7 mini pc i7 12th or 13th or 14th gen 32gb ram 1tb ssd win 11 iot with wireless keyboard and mouse , electronic podium with signage display , gooseneck mic for podium , teacher tracking 20x camera , camera ceiling mount kit , 4k ptz 20x camera , camera wall mount kit , ceiling tile microphones , ceiling tile speakers in pair , wireless mics with receiver 1 handheld and 1 lavalier , dsp 8x8 with camera tracking controller , managed switch , vc software with 1 host 100 users , cables connectors and extenders , active led 1.25pp with controller , wireless presenter with 1 dongle , additional dongles for wireless presenter , 200w dsp with inbuilt amplifier , ceiling mount speakers 30w in pair , cables, connectors and extenders , active led 1.56pp with controller , amplifier 200w

Central Government/Public Sector

CTN :44824062

04 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of 10125 mm curved switch with 60 e1 a1 thick web tongue rail and 60 kg. 60e1 r260 grade stock rail for 1 in 12, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-8780 alt. 4 or latest alt if any with elastic fasteners and spring operated setting device (rdso-t-6216 with latest alteration), confirming to irs specification no. t- 10- 2025, irs t-12-2009 for flat bottom rails and irs t- 62- 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t- 55- 2025 (rev. 1) or latest if any and supply of all components/fittings listed as per annexure-a and excluding elastic rail clips, insulating liner, plate screw & singlecoil spring washer etc. ( the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. note: -(i) the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost / per set) in terms ofrailway board letter no. 2022/ track-i(p) / fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching/embossing on each set of tws , so that it can be correlated with the type of set- i. e ., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings with each set as per note-28 of rdsodrg. t-8780 alt. 4 of list 'a'. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44823156

20 Apr, 2026 NA

Vellore - Tamil Nadu

Tender For supply of electrical actuator spares d d - limit switch for smb2-105eplush6bcplusis , torque switch for smb2-105eplush6bcplusis , auxiliary contact for smb2- 105eplush6bcplusis , motor for smb2-105eplush6bcplusis , complete seal kit for smb2-105eplush6bcplusis , complete o-ring set for smb2-105eplush6bcplusis , electronic card for smb2-105eplush6bcplusis , limit switch for smb3- 106point7eplush7bcplusis , torque switch for smb3- 106point7eplush7bcplusis , auxiliary contact for smb3- 106point7eplush7bcplusis , motor for smb3- 106point7eplush7bcplusis , complete seal kit for smb3- 106point7eplush7bcplusis , complete o-ring set for smb3- 106point7eplush7bcplusis , electronic card for smb3- 106point7eplush7bcplusis , modelpoint smb-3 e99point5plus h6bc-2nospoint-plusis , dc-dc power pack unit for modelpoint smb-3 e99point5plus h6bc-2nospoint- plusis , electronic cards for modelpoint smb-3 e99point5plush6bc-2nospoint-plusis , position feedback transmitters for modelpointsmb-3e99point5plus h6bc- 2nospoint-plusis , control unit for modelpoint smb-3 e99point5plush6bc-2nospoint-plusis , limit switch assembly of each unit for modelpointsmb-3 e99point5plus h6bc-2nospoint-plusis , torque switch assembly of each unit for modelpointsmb-3 e99point5plus h6bc-2nospoint- plusis , power contactor for modelpoint smb-3 e99point5plush6bc-2nospoint-plusis , auxiliary contactor for modelpoint smb-3 e99point5plush6bc-2nospoint-plusis , thermal over load relay for modelpoint smb-3 e99point5plush6bc-2nospoint-plusis , motor for modelpoint smb-3 e99point5plus h6bc-2nospoint-plusis , complete seal kit with o-ring set for modelpointsmb-3 e99point5plus h6bc-2nospoint-plusis , complete o-ring set for modelpoint smb-3 e99point5plush6bc-2nospoint-plusis , ec assembly with ldc-controller- for l120-10, model point l120-10-168eplust400plussga4point5plusisplusncept , 20 core ribbon for l120-10,model point l120 10- 68eplus 400plussga4point5plusis , selector switch for l120-10, model point l120-10-168eplust400plussga4point5 , overload relay for l120-10, model point l120- 0- 68eplust400plussga4point5 is

CTN :44327135

13 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 25bz5c201 procurement of electronic plotting table naksh yojana d d -x axis long shafting profile , switch lug , slot nut , slot cover , set of fasteners full , special to type tools , terminal strip 4 pole , tracker ball for dual control , short drag chain y axis , analog plotter complete with key board & trackball , lcd display rugged mil grade , bulb multi colour high intensity , centering pin , spring right , spring left , coupling for x motor , coupling for y motor , drive shaft , external systems simulator on cots hardware , power on off switch 10a 250v , fuse 2amps , gearbox for y axis , interconnecting shaft , keypad with special function keys , long drag chain x axis , motor data cable , mount bracket for drag chain long , mount bracket for drag chain short , mounting plates for profiles , ac power line filter , projector multi colour with cross hair , projector control cable , projector housing with adaptor plate , proximity sensor with cable , controller mkii , serial interface pcb , stepper servo with integral computer and io mkii , signal conditioning board , power supply unit , y axis small shafting profile

CTN :44808213

18 Apr, 2026 12.88 Lacs

Bikaner - Rajasthan

Tender For providing of electricls tools & equipments - heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , knife double bladed electrician , chisel firmer with wooden handle , , (a) crimping tool , wire cutter and stripper , hacksaw frame , tweezers , drill hand brace , plane cutters , smoothing cutters , file flat rough , file flat bastard , file rasp, half round , de soldering gun , contactor & auxiliary contacts (rm) , contactor & auxiliary contacts. (rm) , pin type, shackle type, egg typ & suspension type insulators including , hardware fitting , portable electric drill machine , load bank (lamp/heater typ , brake test arrangement with tv spring balance rating , laboratory type induction coi , series test lamp (rm) , knife switch dpdt fitted with fuse terminals (rm) , knife switch tpdt fitted with fuse terminals (rm) , miniature circuit breaker (rm , earth plate (rm) , earth electrode (rm) , elcb and rccb (rm) , fuses (rm) , rheostat (sliding type) , capacitors (rm) , various electronic components (rm) , various lamps (rm) , plug socket piano switch lamp holder (rm) , cables , twisted pair , non-metallic sheathed cable , underground feeder cable , ribbon cable , metallic sheathed cable multi- , conductor cable coaxial cable , direct-buried cable (rm) , rubber mat (rm) , electrician helmet , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials , ohm meter; series type & shunt type, portable box type , digital multi meter , a.c. voltmeter m.i. analog, portable box type housed in bakelite case , milli voltmeter centre zero analog, portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi, analog, portable box type housed in bakelite case , kilo wattmeter analog , (b) frequency meter (digital) , magnetic flux meter , tachometer , tong tester/clamp meter , megger , single phase variable auto transformer , growler , ac starters , oscilloscope dual trace , function generator , discrete component trainer , linear i.c. trainer , digital i.c. trainer , domestic appliances- , 2. mixture & grinder , h. washing machine semi-automatic , i. motor pump set , oil testing kit , battery charger , current transformer , potential transformer , 15 or 17 computer or latest version , d.c. shunt generator with control panel , motor-generator (ac to dc) with control panel , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker , fire buckets , fire extinguisher co2 , black board/white board , almirah , metal rack , lockers with drawers , working bench , writing board , instructor's table , instructor's chair , diesel generator set with changeover switch, over current breaker and water/air-cooled with armature, star-delta connections ac 3 phase , dc generators-series, shunt and compound type for overhauling practice , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger (home) , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load. , ac phase-wound slip ring motor with starter switch , universal motor with starter/switch , synchronous motor with accessories like starter, excitation arrangements. , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor/igbt controlled a.c. motor drive with , single phase transformer, core type, air cooled , three phase transformer, shell type oil cooled with delta/ star , electrical machine trainer

Central Government / Public Sector

CTN :44807767

22 Apr, 2026 NA

Multi City - Multi State

Tender For manufacture and supply of 6400 mm thick web curved switch for 1 in 8.5 symmetrical split turnout on psc sleepers as per rdso drg. no. rdso/t-8708,alteration.01 (with latest alterations if any), complete with all fittings for 1 in 8.5, bg 60 kg turn out on psc sleepers i.e. all fittings for switch portion as per sub assembly no. t-8708 [with latest alteration ]

Central Government/Public Sector

CTN :44400817

27 Apr, 2026 NA

Multi City - Multi State

Tender For corrigendum : running contract for one year for supply of 6400 mm curved switch with 60 e1 a1 thick web tongue rail and 60 kg. 60e1 r260 grade stock rail for 1 in 8.5, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-9775

Central Government/Public Sector

CTN :44437381

04 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : running contract for one year for supply of 10125 mm curved switch 60 kg. turnout on psc sleeper to rdso drawing no. t-8780

Central Government/Public Sector

CTN :44807324

13 Apr, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For supply of 6400 mm curved switches with 60 e1a1 thick web tongue rails for 1in 8.5 turnout bg (1673 mm) for 60e1 rail with r260 grade on psc sleepers as per rdso drawing no. t-9775 with alteration 3 in accordance with rdso's standard drawing no.t-9774 alteration 2 and conforming to irs specification no. irs:t-10-2025 & irs:t - 62 -2025 (complete set) with latest revision/corrigendum/amendment complete with all parts listed in the sub assembly rdso drawing no. t-9775 but excluding standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e- tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arranged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings attached as annexure-c [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44824054

27 Apr, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of 6400 mm curved switch with 60e1a1 thick web tongue rail and 60 kg. 60 e1 r260 grade stock rail for 1 in 8.5, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-9775 alt. 2 or latest alt if any with elastic fasteners and spring operated setting device (rdso- t - 6216 with latest alteration), confirming to irs specification no. t - 10 - 2025, irs t- 12 - 2009 for flat bottom rails and irs t- 62 - 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t- 55 - 2025 (rev. 1) or latest if any and supply of all components/fittings listed as per annexure-a and excluding elastic rail clips, insulating liner, plate screw & single coil spring washer etc. (the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. (i) note: - the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost / per set) in termsof railway board letter no. 2022 / track-i(p)/fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching / embossing on each set of tws, so that it can be correlated with the type of set- i.e., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings with each set as per note-26 of rdso drg. t-9775 alt. 2 of list ' a '. [ warranty period: 30 months after the date of delivery ]

Curved Switch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors