Latest cutter block Tenders | Government cutter block Tenders

CTN :39816435

22 Apr, 2025 NA

Kavalbyrasandra - Karnataka

Tender For corrigendum : supply of spares for horizontal bandsaw - cutting blade , coolant pump , pipes towards coolant , pipes connectors , oil filter

CTN :39816436

22 Apr, 2025 NA

Kavalbyrasandra - Karnataka

Tender For corrigendum : supply of spares for wire cut edm cnc machine - cutting wire,per roll , filter , software , ups , battery set in ups

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government/Public Sector

CTN :39575425

15 Apr, 2025 NA

Hyderabad - Telangana

Tender For corrigendum : supply of pug cutting machine with spares - pug machine 150 mm capacity with spares, pug machine 150 mm capacity with spares

CTN :39971407

19 Apr, 2025 NA

Kolkata - West Bengal

Tender For tender for supply of critical spares for cnc plasma cutting machine pur rkj - 229479 leads- maxpro 200 torch 22m -75 , 420087 maxpro200 straight torch , pcb assembled ihs pcbasb0042 , sensor proximity e2s-w21b-1m omron , 428042 kit- maxpro200 press transducer , 11114 filter-regulator-7-125 psi 1-4 , 428038 maxpro200 filter housing , 3249 contactor-90 amps 3-pole 120 volts , limit switch lever teknic ng1vs-510-m , hose- 10mm black polyhose ffchse0033 , hose- 10mm blue polyhose ffchse0034 , hose- 10mm red polyhose ffchse0035 , torch coolant , 70-30 pg , 1-gal (1can_1gal) , powder making torch thooth0099

corporations/Associations/Others

CTN :39918518

17 Apr, 2025 3.00 Lacs

Tindivanam - Tamil Nadu

Tender For supply and delivery of india mark ii bore well hand pumps spares in tindivanam municipality - labour charge for removel and re-errection of submersible pump set in bore well/open well including fixing and jointing and cable with proper clamps up to the starter to the required depth and also fixing of riser pipes to the require depth valves erection clamps etc. complete, supply and delivery of direct online 1.0 hp panel board confirming to is13947 and iec 947 suitable kw rating for operation in ac/single phase/50hz( 5%) and 230 v( 10%) including ammeter, voltmeter, thermal overload relay, 16 amps 2 pole magnetic contactor with under voltage protection, indication lamp, starting capacitor, running capacitor and on/off push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper pvc insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). etc., complete., supply and delivery of 1.5 sq.mmpvc insulated and sheathed 3 core flat type copper cable conforming to is 694/1990 etc. complete as per standard specification., supply and delivery of 25mm hdpe pipe with isi mark etc. complete as per standard specification., supply and delivery and fixing of 2000 liters hdpe tank as per is 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the gi pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete, rewinding and servicing of 1.0 hp single phase submersible pumpset and motor etc. complete including material charges and all other incidental charges,etc complete, rewinding of 5.0 hp three phase submersible pumpset as per is 8034/2002 etc. complete including material charges and all other incidental charges,etc complete, supply and fixing of following main switch,mcb and capacitor with isi mark etc complete as per standard specification main switch, supply and fixing of following main switch,mcb and capacitor with isi mark etc complete as per standard specification mcb, supply and fixing of following main switch,mcb and capacitor with isi mark etc complete as per standard specification capacitor, supply and delivery of direct online 1.0 hp panel board confirming to is13947 and iec 947 suitable kw rating for operation in ac/single phase/50hz( 5%) and 230 v( 10%) including ammeter, voltmeter, thermal overload relay, 16 amps 2 pole magnetic contactor with under voltage protection, indication lamp, starting capacitor, running capacitor and on/off push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper pvc insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). etc., complete., supply and delivery of 1.5 sq.mmpvc insulated and sheathed 3 core flat type copper cable conforming to is 694/1990 etc. complete as per standard specification., supply and delivery of 25mm hdpe pipe with isi mark etc. complete as per standard specification., supply and delivery and fixing of 2000 liters hdpe tank as per is 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the gi pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete, rewinding and servicing of 1.0 hp single phase submersible pumpset and motor etc. complete including material charges and all other incidental charges,etc complete, rewinding of 5.0 hp three phase submersible pumpset as per is 8034/2002 etc. complete including material charges and all other incidental charges,etc complete, supply and fixing of following main switch,mcb and capacitor with isi mark etc complete as per standard specification main switch, supply and fixing of following main switch,mcb and capacitor with isi mark etc complete as per standard specification mcb, supply and fixing of following main switch,mcb and capacitor with isi mark etc complete as per standard specification capacito

Central Government/Public Sector

CTN :39966739

07 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of cutting chain carbide bit ( excavation chain) for bcm as per plasser part no.64.08.2000.33.84gl in set and as per r dso drawing no.-tm/9302(rev.) & rdso/tm/03/19 (carbide bit) and rdso specification tm/hm/6/111 & tm/hm/6/435 (carbide bit). one set of carbide bit cutter chain consisting of following nine spares- 1.scrapper shovel part no.64.08.2038-rt = 86 nos. 2. intermedia te link part no. 61.04.211-rt= 86 nos. 3. chain bolt part no. 61.04.212 =172 nos. 4. t-bolt part no. 61.04.218 = 172 nos. 5. sprin g washer part no.vs10/verz =430nos. 6. hex nut part no. m10din934-8/verz = 430nos. 7. cutter bit part no. 64.08.2034-hm= 4 30 nos. 8. lock washer part no. 64.08.2035c=430 nos. 9. fixing pin part no. 8x40din1481 = 430 nos). make : plasser or its equival ent warranty: as per warranty clause detailed in the conditions. ]

CTN :39917050

15 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of portable inverter type plasma cutting machine with inbuilt air compressor facility and inverter type welding machine along with allied spares required for maintenance activity under ae(maint)wwes i division

CTN :39909407

24 Apr, 2025 NA

Patiala - Punjab

Tender For supply of b veh spares - 4730 000926 lubricating nipple , nk002230 union 27mm , nk002905 union 19mm , nk002855 palm adopter , 50 110 lock plate , 50 54 56 split pin , nk000407 split pin large , nk000406 split pin small , nk002229 union 24mm , nk002906 control valve adopter , nk002121 nut booster , nk002789 pulley centre bolt , nk003196 brake booster pin small , 8010 000291 paint remover , nk001956 cutting wheel , nk000701 thread tape , nk000894 anabond , 5306 005207 bolt square , 3040 000239 link assy , 2530 001671 adjuster slack , nk002590 toe bar spring , m 915080 union body , 5360 001282 brake repulling spring , irs w be 1100 hand wheel

Cutter Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector