Latest cutting equipment Tenders | Government cutting equipment Tenders

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

Central Government / Public Sector

CTN :45013742

18 May, 2026 NA

Guntur - Andhra Pradesh

Tender For supply of abrasive cutting equipment along with accessories as per specification enclosed . [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45054924

12 May, 2026 NA

Multi City - Telangana

Tender For auction sale of others - 74081-26-04-001-hyb-mly- ms water tank: scrap. cond. unserviceable ms water (predominant ferrous structure) consisting of rails and ms flats, pvc water tanks. total nominal weight of lot=87.12 mt. total number of ms water tanks=01. the offered is for sale and for dismantling/demolitionpurpose available under the jurisdiction/custody of sse/works/mly, delivery by actual weightment basis only. (please check lot image for inventory and photos of the material) location. available inside tsmd compound- moula ali. ds 8 no. 074081-26-00020 dt.17.04.2026. state telangana. pl no.98050011 hsn code. 72044100. refer to depot conditions for gstin of state railways, list of holidays and other conditions. special conditions. 1. approximately, 100 meters distance material shifting shall be done by purchaser to reach proper approach road. 2the tsmd pitwheel lathe ohe line is available beside the water tank. therefore care shall be taken while dismantling. 3.in order to make an assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding. 4. post-auction no representation shall be entertained. 5. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery. 6. the bidder should provide proper barricading all-round the structure to prevent damaging of adjoining structures from dismantled material and not to endanger the safety of human beings and public/ private property in vicinity. purchaser should place safety banner surrounding the work place/ spot. 7. gas cutting is permitted. 8. the purchaser has to make his own arrangements such as tools, lifting tackles, gas cutting equipments and necessary trained men for cutting, loading & clearing the debris etc. they should have fire fighting arrangement and first aid box for any emergency. 9. delivery by actual weighment basis only.

corporations/Associations/Others

CTN :45045205

14 May, 2026 1.63 Crore

Raigad - Maharashtra

Tender For supply of tent , chair , table , torch , dragon torch , rain suit , patrolman stick , punji , pick axe beater , walkie talkie , clip applicator , rail disc cutter , rail disc cutter wheel stone , rail drilling machine , rail drilling tool , chamfering kit , at welding trimmer , rail heating blower for at weld , thermit welding tool set , rail profile weld grinder , rail grinding stone , straight edge , track jack , track jack mechanical , rail dolly , rail tong , prc sleepers chain , joggled fish plate , fish plate 1 mtr long , c clamp , anti sabotage device , anti sabotage device key , fish bolt spanner , hammer 5kg , hammer 3kg , digital toe load measuring device , rail tensioner , hydraulic sleeper spacer , mono rail wheel barrow , portable dc welding generator , rail wear gauge , continuous rail thermometer , laser distance meter , electric jumper wire , jim crow , rail thermometer , pwi inspection kit , versine measuring kit , track gauge cum level , destressing roller , off track tamper , off track tamper trolley , tamping tools , acd male , acd female , electric arc welding machine , banner flag , hs flag red , hs flag green , safety jacket , safety helmet , safety shoe , tricolor torch , number plate , staff for patrol man , key man bag , breathe analyzer , keying hammer , pway inspection trolley , material trolley , dip lorrey , measuring tape 30mtr , measuring tape 15mtr , measuring tape 5mtr , steel sections cutting equipment , plate screw tubular spanner , wire basket , adjustable spanner , whistle , powrah spade , rake ballast , pan mortar , wooden blocks , chain saw , bush cutter , tarpaulin , grease , grease gun , caution indicator boards , speed indicator boards , termination boards , column posting for boards , generator , remote controlled gang hooter , safety goggles , ambient temprature thermometer , small testing hammer , inspection cum chipping hammer , elcometer , pocket steel tape , straight edge 1m , measuring tape 30m , log line with 20 kg mettalic clinder , probing rod , inside calliper outside calliper , feeler gauge , mirror 10x15 cm , bridge inspection torch light , magnifying glass 100 mm , piano wire with clamps , plumb bob , steel scraper , binoculars , current meter , echo sounder , schmidts hammer , dye penetration kit , magnetic crack detector , welding gauge , safety belt , duro meter , auto level , hydraulic torque wrench , hexagonal crowbar , tommy bar , fire buckets with stand , emergency medical hand stretcher , first aid box - first aid box , tool box , hammer 500gm , gum boots //bid details 2 / 96

CTN :45004670

06 May, 2026 3.00 Lacs

West Kameng - Arunachal Pradesh

Tender For tender for supply of garden pipe roll 30 mtrs 20mm , gate valve 50mm , tap ss on and off , ms coupper gate valve half inch , upvc pipe 15 mm , elbow , socket , union , taflone tape , solvent cpvc , waste pipe , pvc connection pipe , brass mta upvc , brass fta upvc , socket 1 inch upvc , pipe upvc 1 inch , pipe , elbow , socket , brass mta , brass fta , wire for grass cutter , file tringular for saw sharping , welding rod 315 , welding rod 450 , fevicol 1 ltrs pack , nails 2 inch , 3 inch , 4 inch , 5 inch , 6 inch each type 5 kgs , blade for hand grinder , screw 40mm , lime chuna , agro net , footmat roll 10 mtrs , plywood 8ft x 4ft x 2mm , white cement , binding wire , led tube light 4 ft long , led tube light 2 ft long , led buld 9 oblique 10 watt , insulation tape , wire 2.5 sqmm , wire 1.5 sqmm , wire 0.75mm , wire flexible , 3 pin top plug 5 by 6 amp , switch socket combination 5 by 6 amp , switch socket combination 15 by 16 amp , pvc box 8inch x 6inch , pvc box 6inch x 6inch , pvc box 4inch x 4inch , switch 5 amp , socket 5 amp , cassing capping 1 inch , helogen rod for heater 10 rod in box , helogen rod for piller room heater , distal water , tubler bty 12v 200 ah luminous , gyser 20 ltrs , gyser 3 ltrs

CTN :43994937

07 May, 2026 11.94 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools & equipmentforan international standard itot in welder tradeat iti rajkot, gujarat, india - electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester, electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fin

Central Government/Public Sector

CTN :44968917

13 May, 2026 NA

Erode - Tamil Nadu

Tender For supply, installation and commissioning of ultra thermic cutting equipment as per specification attached. warranty period is 24 months from date of successful commission of the machine.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :44969166

15 May, 2026 NA

Raigarh-Mh - Maharashtra

Tender For supply of gas cutting equipment with pipe complete set [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44858463

12 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of ultrathermic cutting equipment -complete with pc/t-5-4100 cutting torch assembly along with accessories in a carry case one set of std. consumables set complete as per specification attached at annexure-a [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44842938

15 Apr, 2026 NA

Waltair - Andhra Pradesh

Tender For corrigendum : supply of fs 230 bush cutter with autocut & 2t grass cutting blade (cutting blade (cruise control), engine- 2-stopke, displacement (ccm)= 40.2, max. torque (nm)= 1,9/6,00, fuel tank capacity (lts) 0.810l make : stihl or mtd or cub cadet [ warranty period: 12 months after the date of delivery ]

Cutting Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors